Originally Posted by EnErgy667
My card came stock with FX1 bios but the temps were sky high, as i wrote they got up to mid 80's, now with my moded bios they lowered by more than 10c. I wouldn't give up if I were you, because I too couldn't solve my problem for two whole weeks, but i read and read and then read some more until i had the courage to do all this myself, and voila the results are very satisfying. You have to take your room temp into account because 30c is very high and even for a very aggressive fan profile it is hard to keep the card at lower degrees.
SEE I told you something is messed up, just now fired up win 7 from my 2nd HDD ran few benches all said temp is 1.25v.
SO the thing is although in win8 it's showing voltage is less but is actually using 1.25 and that may be the reason of no temp change.
something is surely messed up.
they got up to mid 80's, now with my moded bios they lowered by more than 10c
actually this thing is wrong the temps did not got reduced by 10 due to your mod, stock gigabyte FX0 itself is 8-10c cooler than stock FX1, already tested by me.
I flashed stock FX1 temps shoot up 8-10C but using your and robin's mod no change compared to stock FX0.
I am sure you won't beleive me, do one think flash gigabyte FX0
and stress then repeat the process with your modded FX0
not modded FX1
then compare the temps, that would be a fair comparision.Edited by xtreemeNoob - 6/12/13 at 7:06am