Overclock.net banner

LN2 Jug! Monsoon Free Center Fittings, Fans, odd fittings. No REASONABLE offer refused!

8K views 38 replies 11 participants last post by  Ceadderman 
#1 · (Edited)
New addition!

Taylor Wharton 4LD LN2 Jug! Get this while I have it. It is used but none the worse for wear. It has a rubber stopper top, so it's seen some use to be sure. 4LD size goes for quite a bit I will part with this one for $225 $175 + shipping.
... I cannot go much lower but I will consider offers and possibly trades.

This is not an item that I will take on the shipping expense short of tracking and insurance.
I can provide proof of ownership upon request.

Now adding a qty of 5 Monsoon Economy v1 six packs! These are 1/2x5/8 size. These are new, never used fittings. For the most part they are all Red. Three of them are Black Nickel to fit my build.

Again decided to go another direction with this build. So my loss on these fantastic fittings is your gain! I paid full price for them so I will sell them @ $15 per pack and ship these for this price. I could shelve them but they've been on their knees begging to be put to work. So I promised them I would try to find them all good homes. I will split the 3 Black Nickels from the group, as for the rest I would like to keep them together. Will consider taking less for the right person if they take all 5.


Don't forget to look down below for anything that I still have.


Various Monsoon, BP, Koolance Fittings!

Misc Fittings (Click to show)Once again I'm looking at replacing my current fittings. I've only run them on Distilled and no additives. Not even Silver Killcoil and the Koolance 2/3 VGA fitting also has NEVER been used. As well as the Fillport and the EK Black CSQ 45. ALL of them are pristine!

I like these fittings alot, it's just time to make the another change.


2 New unused Monsoon Free Centers. *Not the silver base but the original brass style.* and 4 Silver base style. $25 shipped with tool.

:Edit: Have some more fixtures added. 2 BP Black std Barbs, 1 DD Plexi T, 1 Koolance Nickel Fillport, 1 NEW Bitspower BP-MBWP-C62 G1/4" Matte Black IG1/4" Extender - 25mm and 1 Phobya Male/Male extension in Shiny Black Nickel.

Once again creative issues force me to add something to the list... Sadly my brand new Chaingun fittings are out.


  • To Recap
  • Monsoon Chaingun Red Contrast Chaingun fittings !NEW! 1/2"x5/8" 4 pack w PC collar joining parts
    Chaingun 5/8 (Click to show)

    Warning: Spoiler! (Click to show)
  • Five Enzotech 45 Degree Rotaries; Black $5 ea. ... On hold
  • Ten Monsoon 1/2" x 3/4" Free Center Compressions in Red Nickel. $5 ea. ... SOLD!
  • Six Monsoon 1/2" x 3/4" Free Center Compressions in Red Nickel. 4 Silver Barbs and 2 Reds. No need to worry about the Silver. It's formulated to avoid issues. NEW & Unused. $28 Shipped.
  • 2 six packs of Monsoon Economies 1/2"x5/8" 1 pack Red, 1 pack 60/40 Red and shiny Black. BNIB and unused $40 shipped
  • Two BP barbs 1/2"; Black used $4 ea.
  • One Koolance VGA Connect; Black. Never used.$12
  • EK Black Nickel CSQ 45 degree Fitting $10 *NEW*... SOLD!
  • Koolance Nickel Fillport. Never used. $8
  • Phobya Black Nickel Male/Male extension. $3
  • Danger Den Plexi T fitting. $2
  • Enzotech G1/4 threaded Female barrel. $4
  • Bitspower BP-MBWP-C62 G1/4" Matte Black IG1/4" Extender - 25mm $7.50 shipped

I have used NO dyes in my loop ever, so you will not be disappointed in anything you get from me. The only thing you will see in my fittings is thread tape that may be left over from use unless it's an unused fitting which will be appropriately untainted by anything of any kind.


Will entertain serious cash offers. I need to sell these asap to finish my current project.


Thank you to everyone for taking the time to look at my wares. You're all very much appreciated.


*Blocks shown for perspective purposes only*

Fans! (Click to show)
  • Fans!
  • Cooler Master FA20030M12SFD Red LED $15
  • 2 Yate Loon D12SH-12Red LED (120x25) with grill. $10 for the pair or $6 each.
  • 3 Yate Loon D12SH-1C High Speed Silents (120x20) $7 each
  • 3 Yate Loon D12SM-1C Medium Speed Silents (120x20) $7 each
  • 1 Yate Loon D14SH-12 High Speed Silent (140x25) with shortened cable and 140 grill and sleeved with a short bit of MDPC sleeving. $6

 
See less See more
15
#2 ·
I am interested in the 90deg adapters, and possibly the 2-3 D-plugs. Is there anything you would be interested in trading for? I have a lot of stuff sitting around that I have no use for, that runs the gamut (literally two rooms of my house are filled with computer parts lol). I do have some Monsoon 1/2x3/4 "black Chrome" comps that I haven't used, and likely never will, but that is just one of thousands of things lol.
 
#3 ·
Quote:
Originally Posted by nleksan View Post

I am interested in the 90deg adapters, and possibly the 2-3 D-plugs. Is there anything you would be interested in trading for? I have a lot of stuff sitting around that I have no use for, that runs the gamut (literally two rooms of my house are filled with computer parts lol). I do have some Monsoon 1/2x3/4 "black Chrome" comps that I haven't used, and likely never will, but that is just one of thousands of things lol.
Yikees. If only they were Red or White I would be completely interested in them. More interested in the Red however because they need to blend with my Board and my RAM. Unfortunately I need to do the cash option so I can get the replacements on the double quick. I've sold some stuff on eBay but we all know how long that can take to pay out. For me I respond and ship in 3 days depending on where the 3rd day lands. So I'm kinda at the mercy of funding.
mellowsmiley.gif


Apologies for the late reply though. Been at Ma's house digging trench and dropping water pipe into the ground.
redface.gif
 
#4 ·
Found my 2 NEW unused unscratched Monsoon Free Center fittings. My loss is your gain. $16 for the pair with the wrench(Love Freebies?) shipped. Can't beat that unless you live on the Eastern Seaboard.
thumb.gif


~Ceadder
smil3dbd4e4c2e742.gif
 
#6 ·
Quote:
Originally Posted by Lefik View Post

I'm having trouble finding the Koolance fill port and the Danger Den T fitting; could you link me to the product pages? Thanks.
Try performance-pcs.com They have both listed.
wink.gif
 
#7 ·
Bump
 
#9 ·
Chainguns are only Hardline.

I have two BP black satin barbs. And have two Monsoon Free Center Red flex tubing fittings. Both are 1/2" ID and the Monsoons are 3/4" OD. If you're running PrimoChill LRT the collars are quite tight on them unless you chamfer the tube at the ends with a bit of paper to take off some of the meat or if you use 1/2"x5/8" tubing to allow for clearance.

All other fittings can work for either flexible/hardline tubing.
thumb.gif


~Ceadder
smil3dbd4e4c2e742.gif
 
#11 ·
No problem. But I would suggest that PETG is also Hardline. For your purposes you don't need the acrylic caps that the Chainguns or the Hardline Freecenters require.
thumb.gif


~Ceadder
smil3dbd4e4c2e742.gif
 
#12 ·
Smartphone Bump!
smile.gif


~Ceadder
smil3dbd4e4c2e742.gif
 
#13 ·
New used parts added...

360mm HWLabs Black Ice Stealth

FrozenQ 250mm Res.

~Ceadder
smil3dbd4e4c2e742.gif
 
#15 ·
HardwareLabs Black Ice Stealth 360.

No timestamps atm since I cannot update the thread from my phone other than text based in the main input window.

I should have them up Monday at the latest.
thumb.gif


~Ceadder
smil3dbd4e4c2e742.gif
 
#16 ·
Quote:
Originally Posted by Ceadderman View Post

HardwareLabs Black Ice Stealth 360.

No timestamps atm since I cannot update the thread from my phone other than text based in the main input window.

I should have them up Monday at the latest.
thumb.gif


~Ceadder
smil3dbd4e4c2e742.gif
Its the old Black Ice, not the newer Black Ice Nemesis right?
 
#17 ·
Yes. Older Black Ice Stealth.

Pics





Frozen Res









Apologies for the potatoes but it's all I have at the moment. The Radiator is in pretty reasonable shape given the age of the old girl.

And the Rest has a little calcification staining on one sie but it is fully operational. I capped the opening between the two ports with the end cap from a Bic ball point. I didn't need to and it can easily be removed as the only thing holding it in is a piece of Teflon tape. I used a single wrap of tape at each end of the cap to ensure watertight seals as well. Port threads are in good condition too. I priced it where I did due to the staining. It can be opened and cleaned but I didn't know what to use. I guess I could of tried using CLR, but I didn't want to take a chance and possibly damage the acrylic attempting that as a solution.
mellowsmiley.gif


Am only selling cause I have decided to increase the size of my loop and want everything from the same companies I am putting into my Mod, which is EK and Monsoon. These are great for a first loop and the Yate Loon 120Ă—20 fans I have up were on this Radiator. Kept my 1100T nice and cool in the mid 40c range under 100% load with an EK Supremacy HF number 6 jet plate setup.
thumb.gif


~Ceadder
smil3dbd4e4c2e742.gif
 
#18 ·
Phonebump!
thumbsupsmiley.png


~Ceadder
smil3dbd4e4c2e742.gif
 
#19 ·
Buh bump ba bump.

~Ceadder
smil3dbd4e4c2e742.gif
 
#20 ·
Beedadeedabump...
biggrin.gif


~Ceadder
smil3dbd4e4c2e742.gif
 
#21 ·
hey man, the res itself wont leak, right?
 
#22 ·
Nope, will not leak. I haven't pulled it apart since I wrapped the threads with silicon tape and put it back together. 1 and 1/4 wrap each end.
thumb.gif


~Ceadder
smil3dbd4e4c2e742.gif
 
#23 ·
Thread bump.
wave2.gif


~Ceadder
smil3dbd4e4c2e742.gif
 
#25 ·
Got any bigger pictures of the Fan Controller? Any chance you could put together some total measurements? Trying to decide how I'm going to control the fans in my Air 240 with dual 240mm radiators... and space is of a premium
tongue.gif
 
#26 ·
I can get them right now...







Sorry for my potato pics but it's all I can do atm.
blushsmiley.gif


I have the 3.5 bay controller mounted in a CoolerMaster 5.25 bay adapter. I mounted it as far back as it would go so that I could flush mount the adapter it the 5.25 bay I had it in. Depth is no more than a few inches for the controller itself. I can get you that info if you need it but if you have a ODD in your system now I can tell you that this device won't come close to it in depth. In fact the adapter it's in was approximately .5" short of my ASUS DVD RW drive.
smile.gif


~Ceadder
smil3dbd4e4c2e742.gif
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top