Originally Posted by Sin0822
also BIOS F5o can cause issues, i mean it is a testing BIOS. The ones I had most luck with are F5F and F5G, other BIOSes gave me odd issues sometime. Also since you don't need any slews because you are using hynix which only uses slew 1, then you can use a BIOS without slews. Just XMP sets a lot of things, even if you change every timing you still need to have XMP set, also multipliers(memory ones) change background settings. Also Hynix loves voltage, you gotta give it that.
if you want 2800 to work on your memory you need to change up the 3rd timings, my timings should work for you, unless the BIOS isn't letting them stick.
Will test F5F and F5G.
Voltage (RAM) is set to 1.80 - Which should be enough ?
Will check your 3rd timings again and see if I can get 2800 to run on those with XMP timings - Then tighten 1st timings from there (No idea how to work with 2nd timings, but will get there).
And thanks for the advice about having to have XMP enabled, that was the trick - Could not get anything to work before, but after enabling XMP and then just changing settings from there, everything works.