Originally Posted by skummm
New version of F7A bios out with updated roms etc...
GA-Z77X-UP7 BIOS F7a mod4
Modified with :
Intel Legacy RAID for SATA 126.96.36.1992 to 188.8.131.520
Intel UEFI RAID SataDriver 184.108.40.2062 to 220.127.116.110
Marvell 88SE91xx Adapter 1.0.0.0027 to 1.0.1.0025
Intel PCI Accelerated SVGA BIOS 2137 to 2170
Intel Sandy GOPdriver 2.0.1023 to 2.0.1024
Intel Ivy GOPdriver 3.0.1023 to 3.0.1027
Atheros PCIE Ethernet Controller 18.104.22.168 to 22.214.171.124
Intel Boot Agent PXE 1.3.81 to 1.5.48
Intel GigabitLan X64 5.1.00 to 6.0.24
CPU Microcode Pack (Sandy 728 & Ivy 919)
ME firmware 126.96.36.1990 to 188.8.131.521
Modified splash logo 2
The above is the same link as you would get from this
While i'm here... just curious... has anyone used low voltage ram on this board... I am having a hard time getting it to boot with XMP profile 1 selected...
The kit is G.Skill Sniper 1.25v
I've had issues getting other Z77 boards to boot with this kit (the kit is known good, works fine with X58 etc) so I just wondered if Z77 boards had issues with low voltage ram in general, and if any of you guys had encountered this issue...
Happy flashing and clocking