Overclock.net › Forums › Cooling › Water Cooling › mounting mcp35x with heatsink
New Posts  All Forums:Forum Nav:

mounting mcp35x with heatsink

post #1 of 7
Thread Starter 
I have a mcp35x2 with heatsink ( mcp 35x2-HS ). I will connect a 250 ek reservoir, with a bitspower fitting. However the heatsink has 4 feets, I am space restricted. I s their a way so I can "hang" / mount this on a different way.

restricted in space because I have a switch810 with a 360 rad P/P 45 mm and corsair fans in the top, and a 240 UT60 in P/P in the bottom, which leaves me ( together with a PSU/RAD cover in the bottom) about 36 cm space.
gun switch
(10 items)
 
  
CoolingCoolingCoolingCooling
Alphacool NexXxos Monsta 240  6 Corsair SP 120mm QE, 3 Corsair AF 140mm QE Switech MCP 35x2 Swiftech MCP35X2 Heat Sink MCP35X2-HS 
CoolingCoolingCoolingOS
EK-Multioption RES X3 - 150 multi Alphacool NexXxoS XT45 Full Copper 360mm 4 corsair SP 120 mm perfomance fans. microsoft-windows-7-professional-64-bit-nl-oem 
CaseOther
Switch 810 GUN Edition aquaero 5 XT + PA2 
  hide details  
Reply
gun switch
(10 items)
 
  
CoolingCoolingCoolingCooling
Alphacool NexXxos Monsta 240  6 Corsair SP 120mm QE, 3 Corsair AF 140mm QE Switech MCP 35x2 Swiftech MCP35X2 Heat Sink MCP35X2-HS 
CoolingCoolingCoolingOS
EK-Multioption RES X3 - 150 multi Alphacool NexXxoS XT45 Full Copper 360mm 4 corsair SP 120 mm perfomance fans. microsoft-windows-7-professional-64-bit-nl-oem 
CaseOther
Switch 810 GUN Edition aquaero 5 XT + PA2 
  hide details  
Reply
post #2 of 7
Got any photos?

I've hung water cooling bits loads of times... but I've not moved most cases more than a few inches once done. Not sure I'm understanding the question right... hence a photo or two would paint a thousand words!

Cheers,

DB
post #3 of 7
Thread Starter 
it's not about moving the case, but mounting the mcp35x2 with heatsink in the case. It cannot be placed in a Bay.
gun switch
(10 items)
 
  
CoolingCoolingCoolingCooling
Alphacool NexXxos Monsta 240  6 Corsair SP 120mm QE, 3 Corsair AF 140mm QE Switech MCP 35x2 Swiftech MCP35X2 Heat Sink MCP35X2-HS 
CoolingCoolingCoolingOS
EK-Multioption RES X3 - 150 multi Alphacool NexXxoS XT45 Full Copper 360mm 4 corsair SP 120 mm perfomance fans. microsoft-windows-7-professional-64-bit-nl-oem 
CaseOther
Switch 810 GUN Edition aquaero 5 XT + PA2 
  hide details  
Reply
gun switch
(10 items)
 
  
CoolingCoolingCoolingCooling
Alphacool NexXxos Monsta 240  6 Corsair SP 120mm QE, 3 Corsair AF 140mm QE Switech MCP 35x2 Swiftech MCP35X2 Heat Sink MCP35X2-HS 
CoolingCoolingCoolingOS
EK-Multioption RES X3 - 150 multi Alphacool NexXxoS XT45 Full Copper 360mm 4 corsair SP 120 mm perfomance fans. microsoft-windows-7-professional-64-bit-nl-oem 
CaseOther
Switch 810 GUN Edition aquaero 5 XT + PA2 
  hide details  
Reply
post #4 of 7
Sorry, I mean I have simply "hung" a pump using the tubing... but I wouldn't do that if I moved my PC case... sorry for confusing the matter.

I actually have a D5 attached to an EK 250 (via 7/16" tubing and EK compression fittings), I've put some foam underneath it and between the case to stop it moving too much but that's not supporting it at all... for all means and purposes... it's being hung.

Is this what you mean?

Cheers,

DB
post #5 of 7
Thread Starter 
I hope the next pictures will be more helpfull. I need to mount the mcp 35x2 + HS at abot this height. Any suggestions rolleyes.gif




gun switch
(10 items)
 
  
CoolingCoolingCoolingCooling
Alphacool NexXxos Monsta 240  6 Corsair SP 120mm QE, 3 Corsair AF 140mm QE Switech MCP 35x2 Swiftech MCP35X2 Heat Sink MCP35X2-HS 
CoolingCoolingCoolingOS
EK-Multioption RES X3 - 150 multi Alphacool NexXxoS XT45 Full Copper 360mm 4 corsair SP 120 mm perfomance fans. microsoft-windows-7-professional-64-bit-nl-oem 
CaseOther
Switch 810 GUN Edition aquaero 5 XT + PA2 
  hide details  
Reply
gun switch
(10 items)
 
  
CoolingCoolingCoolingCooling
Alphacool NexXxos Monsta 240  6 Corsair SP 120mm QE, 3 Corsair AF 140mm QE Switech MCP 35x2 Swiftech MCP35X2 Heat Sink MCP35X2-HS 
CoolingCoolingCoolingOS
EK-Multioption RES X3 - 150 multi Alphacool NexXxoS XT45 Full Copper 360mm 4 corsair SP 120 mm perfomance fans. microsoft-windows-7-professional-64-bit-nl-oem 
CaseOther
Switch 810 GUN Edition aquaero 5 XT + PA2 
  hide details  
Reply
post #6 of 7
Psst, using dual XSPC ddc stands here.
LL
The 3930
(23 items)
 
Junior's 3820
(18 items)
 
SO's HTPC 2500K
(17 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K Asus Rampage IV Extreme XFX 7970 Black Edition Diamond 7970 x3 
RAMHard DriveHard DriveOptical Drive
Samsung 2400mhz 4gb x4 Samsung 830 128gb x2 Seagate 3TB 7200rpm Asus BD ext 
CoolingCoolingCoolingCooling
Alphacool Monsta 480 + Nova 1080x2 Alphacool XP3 + EK RIVE Quad EK-FC7970 GT AP15 x22 
CoolingOSMonitorPower
MCP35x x3 Win7 Pro x64 Asus VS229H-P x3 Lepa 1600 
CaseAudioAudioAudio
Corsair 700D Yamaha NeoHD YMC-500 Dayton Audio BS36 Energy MSW M6 
  hide details  
Reply
The 3930
(23 items)
 
Junior's 3820
(18 items)
 
SO's HTPC 2500K
(17 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K Asus Rampage IV Extreme XFX 7970 Black Edition Diamond 7970 x3 
RAMHard DriveHard DriveOptical Drive
Samsung 2400mhz 4gb x4 Samsung 830 128gb x2 Seagate 3TB 7200rpm Asus BD ext 
CoolingCoolingCoolingCooling
Alphacool Monsta 480 + Nova 1080x2 Alphacool XP3 + EK RIVE Quad EK-FC7970 GT AP15 x22 
CoolingOSMonitorPower
MCP35x x3 Win7 Pro x64 Asus VS229H-P x3 Lepa 1600 
CaseAudioAudioAudio
Corsair 700D Yamaha NeoHD YMC-500 Dayton Audio BS36 Energy MSW M6 
  hide details  
Reply
post #7 of 7
I am actually trying to mount mine in the exact same spot (identical), and I am at the point where the only thing that I can think ofis mmakinga bracket (L-bbracket) attached directly to the case, and which has holes in the shelf part for the legs to "lock" the pump into place. The problem for me is that the brackets / clamps that came with my EK Multioption Res X2 150 Advanced don't hold the res itself even when empty, much less with the pump attached. I have picked upa ffew brackets, and will hopefully be wworking on it ASAP. It's been holding up the whole build!
     
CPUMotherboardGraphicsRAM
i7 3930K @ 4.8Ghz Asus Rampage 4 Extreme EVGA GTX670 FTW 2GB  16GB G.Skill Ripjaws-Z @ DDR3-2248 9-10-9-26 1T 
Hard DriveHard DriveHard DriveHard Drive
Samsung 830 256GB SSD WD10EZEX 1TB HDD WD10EALX 1TB HDD Seagate Barracuda 7200.14 1TB 
Hard DriveOptical DriveCoolingCooling
WD3200AAKS 320GB HDD LG/Hitachi Slim DVD-R/W Custom MB-Backside VRM-sinks (Copper) DD "Fill-Port Res" + Fill-Port Fitting (Red) 
CoolingCoolingCoolingCooling
2x MCP35X + Heatsinks/80x15mm Fan XSPC EX420 Alphacool NeXXos UT60 240 6x Bgears Blasters 140mm 1800rpm Fans 
CoolingCoolingCoolingCooling
4x Koolance 120x25mm 2600rpm Fans Comp/Rotary Fittings (BP/XSPC/Monsoon) Primoflex Pro LRT - White (1/2x3/4) 3x NZXT RF-FX140LB 1-2krpm 98.3CFM Case Fans 
CoolingCoolingCoolingCooling
2x Corsair SP120-PE Case Fans Heatkiller GTX680 "Hole Edition" Block + Backplate XSPC Single-Bay Res (Single 5.25 bay) EK Multioption Res X2 - Advanced 150 
OSMonitorMonitorMonitor
Windows 7 Professional 64bit  Dell P2210Hb 21.5" 1920x1080p Viewsonic VA2012WB 20.1" LCD 1680x1050 Dell S2320L 23" 1920x1080p LED-Backlit 
KeyboardPowerCaseMouse
Mechanical (Browns) NZXT HALE90 850W NZXT Switch 810 (White) R.A.T.3 + MX510 
Mouse PadAudioAudioOther
My Desk GRADO RS1i Headphones Grado PS1000 Headphones Bitfenix Hydra Pro Fan Controller 5ch 30W/ch 
OtherOtherOtherOther
Bitfenix Alchemy Individually-Sleeved Extension... NZXT Individually-Sleeved Front Panel Wires (Bl... Phobya Sleeved 1x3pin-to-4x3pin Fan Splitter Sleeved Wires w Paracord myself (no Heatshrink) 
OtherOther
Custom Front and Top Panels w HexxMesh *In Prog... Working on Custom Pedestal Prototype 
CPUMotherboardGraphicsRAM
Intel Core2Duo E8600 Asus Stryker LGA775 HD5870 8GB Crucial DDR2-1066 5-5-5-10 
Hard DriveHard DriveHard DriveHard Drive
2x Seagate 7200.9 320GB x2 Seagate 7200.7 160GB 1x WD Caviar SE16 160GB (OS) x2 Maxtor DiamondMax+ 200GB 
Hard DriveOptical DriveOptical DriveCooling
3x WD Caviar SE16 80GB LG/Hitachi Slim DVD-R/W LG Blu-Ray Burner 3x Scythe Slipstream 1900rpm 120x25mm Fans 
CoolingCoolingCoolingOS
2x Delta 120x38mm PWM Fans (2.2-4.8krpm) 2x Delta 92x38mm PWM Fans Misc Assortment of 80/92/120/140 fans Windows 7 Pro x64 
MonitorMonitorMonitorPower
Dell 22" 1680x1050 LG 55" LED-LCD 120hz Television Epson DLP Projector (up to 1920x1200) Enermax 750W PSU 
CaseAudioAudioAudio
Antec SOHO Case (Modified for better cooling) Creative Sound Blaster Audigy Platinum Pioneer VSX-D819S 6.2CH DD/DTS Receiver 2x Pioneer Class-D Amplifiers 
AudioAudioAudioAudio
2x Cerwin Vega VE-12 3-Way Tower Speakers (FR/FL) 2x RTR Series V Model 20 4-Way Tower Speakers (... 2x JBL SoundStage High-Dispersion 3-Way Bookshe... 2x JBL Professional-Series Subwoofers 12"+15" 
AudioOtherOtherOther
MonoPrice 12AWG Copper-Stranded Speaker Cables ... Netgear N900 Wireless Card with 3x Detachable A... 3x Netgear 5-port Managed Switches Hauppage TV Capture Card 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
i7 3930K @ 4.8Ghz Asus Rampage 4 Extreme EVGA GTX670 FTW 2GB  16GB G.Skill Ripjaws-Z @ DDR3-2248 9-10-9-26 1T 
Hard DriveHard DriveHard DriveHard Drive
Samsung 830 256GB SSD WD10EZEX 1TB HDD WD10EALX 1TB HDD Seagate Barracuda 7200.14 1TB 
Hard DriveOptical DriveCoolingCooling
WD3200AAKS 320GB HDD LG/Hitachi Slim DVD-R/W Custom MB-Backside VRM-sinks (Copper) DD "Fill-Port Res" + Fill-Port Fitting (Red) 
CoolingCoolingCoolingCooling
2x MCP35X + Heatsinks/80x15mm Fan XSPC EX420 Alphacool NeXXos UT60 240 6x Bgears Blasters 140mm 1800rpm Fans 
CoolingCoolingCoolingCooling
4x Koolance 120x25mm 2600rpm Fans Comp/Rotary Fittings (BP/XSPC/Monsoon) Primoflex Pro LRT - White (1/2x3/4) 3x NZXT RF-FX140LB 1-2krpm 98.3CFM Case Fans 
CoolingCoolingCoolingCooling
2x Corsair SP120-PE Case Fans Heatkiller GTX680 "Hole Edition" Block + Backplate XSPC Single-Bay Res (Single 5.25 bay) EK Multioption Res X2 - Advanced 150 
OSMonitorMonitorMonitor
Windows 7 Professional 64bit  Dell P2210Hb 21.5" 1920x1080p Viewsonic VA2012WB 20.1" LCD 1680x1050 Dell S2320L 23" 1920x1080p LED-Backlit 
KeyboardPowerCaseMouse
Mechanical (Browns) NZXT HALE90 850W NZXT Switch 810 (White) R.A.T.3 + MX510 
Mouse PadAudioAudioOther
My Desk GRADO RS1i Headphones Grado PS1000 Headphones Bitfenix Hydra Pro Fan Controller 5ch 30W/ch 
OtherOtherOtherOther
Bitfenix Alchemy Individually-Sleeved Extension... NZXT Individually-Sleeved Front Panel Wires (Bl... Phobya Sleeved 1x3pin-to-4x3pin Fan Splitter Sleeved Wires w Paracord myself (no Heatshrink) 
OtherOther
Custom Front and Top Panels w HexxMesh *In Prog... Working on Custom Pedestal Prototype 
CPUMotherboardGraphicsRAM
Intel Core2Duo E8600 Asus Stryker LGA775 HD5870 8GB Crucial DDR2-1066 5-5-5-10 
Hard DriveHard DriveHard DriveHard Drive
2x Seagate 7200.9 320GB x2 Seagate 7200.7 160GB 1x WD Caviar SE16 160GB (OS) x2 Maxtor DiamondMax+ 200GB 
Hard DriveOptical DriveOptical DriveCooling
3x WD Caviar SE16 80GB LG/Hitachi Slim DVD-R/W LG Blu-Ray Burner 3x Scythe Slipstream 1900rpm 120x25mm Fans 
CoolingCoolingCoolingOS
2x Delta 120x38mm PWM Fans (2.2-4.8krpm) 2x Delta 92x38mm PWM Fans Misc Assortment of 80/92/120/140 fans Windows 7 Pro x64 
MonitorMonitorMonitorPower
Dell 22" 1680x1050 LG 55" LED-LCD 120hz Television Epson DLP Projector (up to 1920x1200) Enermax 750W PSU 
CaseAudioAudioAudio
Antec SOHO Case (Modified for better cooling) Creative Sound Blaster Audigy Platinum Pioneer VSX-D819S 6.2CH DD/DTS Receiver 2x Pioneer Class-D Amplifiers 
AudioAudioAudioAudio
2x Cerwin Vega VE-12 3-Way Tower Speakers (FR/FL) 2x RTR Series V Model 20 4-Way Tower Speakers (... 2x JBL SoundStage High-Dispersion 3-Way Bookshe... 2x JBL Professional-Series Subwoofers 12"+15" 
AudioOtherOtherOther
MonoPrice 12AWG Copper-Stranded Speaker Cables ... Netgear N900 Wireless Card with 3x Detachable A... 3x Netgear 5-port Managed Switches Hauppage TV Capture Card 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › mounting mcp35x with heatsink