Originally Posted by Rangerjr1
Well who told you Hydros are good? Also why do you think there is a guarantee your chip would do well?
Also you're probably running 200 FSB and only increasing multiplier, and ive said that increasing FSB can help but no one wants to listen.
if u look over the internet they should perform pretty good with some good fans, well i have good fans some of the best fans u can get for radiator and still have high temps.
i think the TIM that i reapplied need to settle first to get some good temps i guess, i cleaned the cpu and block with alcohol so that is not the problem.
also i was reading a post on here that the block can be a pain because a lot of people have the same issue because of misplaced the seating, well i can't understand how and why u can mount the block wrong because when u tighten it it is getting in place and i have taken a good look and it is exactly above the cpu and i tighten it well.
and no i am running 251 FSB otherwise i could not run my RAM at 2008.
and i did some benchmarks with 3d mark 11 with no problems only when i increase the CPUNB i get instability even at 1.4 volts so or the CPU is not that good or the cooler is wasted, so i need a lot of research on what is going on here.