Overclock.net › Forums › AMD › AMD CPUs › [OFFICIAL] FX-8320/FX-8350 Vishera Owners Club
New Posts  All Forums:Forum Nav:

[OFFICIAL] FX-8320/FX-8350 Vishera Owners Club - Page 243

post #2421 of 67226
Quote:
Originally Posted by FX-8320 View Post

On a mission for the budget overclock build using stock cooler and cheap ass not matching value ram.
So far stable at 4.2GHz using stock v-core voltage of 1.38v, which is rather high frown.gif basically leaves me little to play with. Stock fan get loud under load even when not overclocked mad.gif
What is the most impressive, this might be because the ram is only 2x 2GB, is the overclock I can get out of these old DDR3-1333 modules. One has Elpida chips and the other Kingston.
The ram goes from 1333MHz all the way to 2133MHz biggrin.gif I am thinking that the memory controller in the Vishera is having a impact here.
Being a newbie to AMD overclocking, should I be tweaking anything else like the FSB, NB and/or
other voltages?

What are temps? Download hwmonitor. Core temp shouldn't exceed 61c and cpu temp of about 65c. Try to stay within that range temp wise, while increasing voltage 1 step at a time, like .006250( depending on mobo) little steps. Make sure all power saving states are disabled, and turbo core, set bios to manual instead of auto. Just make sure all is done in the bios not software. Since you have the stock cooler, raise the voltage tell you hit the temp wall. Then back off just a bit. Then increase .5 mhz tell it is stable under temp using the multi, once you find that wall you can back off the multi and increase the fsb to equal that amount while keeping the memory within the same specs.
Edited by pwnzilla61 - 11/4/12 at 2:05am
Rigamormus
(19 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-8350@5Ghz Asus Crosshair V Formula MSI GTX 680 Lightning@1333+600mem 8gb Gskill Sniper 1600 9-9-9-24 
Hard DriveHard DriveHard DriveOptical Drive
2x500gb Crucial M4 OCZ Vertex III walmart brand 
CoolingCoolingOSMonitor
Raystorm custom loop. Coolgate 360 Windows 7 64 Ultimate LG IPS236v 
KeyboardPowerCaseMouse
Razer Black Widow Ultimate 2013 Corsair TX850M Corsair 600t SE Razer Deathadder 
Mouse PadAudioAudio
OCZ Regulator Razer Tiamat 2.2 Creative Sound Blaster Recon3D/audigy 
  hide details  
Reply
Rigamormus
(19 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-8350@5Ghz Asus Crosshair V Formula MSI GTX 680 Lightning@1333+600mem 8gb Gskill Sniper 1600 9-9-9-24 
Hard DriveHard DriveHard DriveOptical Drive
2x500gb Crucial M4 OCZ Vertex III walmart brand 
CoolingCoolingOSMonitor
Raystorm custom loop. Coolgate 360 Windows 7 64 Ultimate LG IPS236v 
KeyboardPowerCaseMouse
Razer Black Widow Ultimate 2013 Corsair TX850M Corsair 600t SE Razer Deathadder 
Mouse PadAudioAudio
OCZ Regulator Razer Tiamat 2.2 Creative Sound Blaster Recon3D/audigy 
  hide details  
Reply
post #2422 of 67226
Quote:
Originally Posted by rubicsphere View Post

Does anyone have experience or heard of any with this particular board and piledriver:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813138341&Tpk=biostar%20990fx

Maybe I just had a bad experience with them but I wont ever buy from Biostar again. I bought a board from them, the A880GZ and one of RAM slots stopped working after a few weeks, I sent it in for RMA and the board came back with a couple of bad USB ports on the I/O shield. I sent it back again and then they sent me the exact same board back. The RMA process was a nightmare, the tech on the phone had no knowledge of anything computer related. I gave up trying to get a satisfactory board back from them and I just gave up on my $70 investment. Maybe their higher end boards are nice but the budget ones don't even work.
post #2423 of 67226
Quote:
Originally Posted by pwnzilla61 View Post

What are temps? Download hwmonitor. Core temp shouldn't exceed 61c and cpu temp of about 65c. Try to stay within that range temp wise, while increasing voltage 1 step at a time, like .006250( depending on mobo) little steps. Make sure all power saving states are disabled, and turbo core, set bios to manual instead of auto. Just make sure all is done in the bios not software. Since you have the stock cooler, raise the voltage tell you hit the temp wall. Then back off just a bit. Then increase .5 mhz tell it is stable under temp using the multi, once you find that wall you can back off the multi and increase the fsb to equal that amount while keeping the memory within the same specs.

umm dam high. I just download prime95 with hwmonitor and this thing sound like a giant mosquito, the rev counter will not register any higher. I can't be sure, but the temp of the cpu went up high and
is stuck on 80c, all cores are 66c, while under full load.

Have got all the power states set to disabled. Not sure how I am going to back off the temp, I am think that it will over 65c even at stock speeds, as the VID is a dam high 1.38v stock

The voltage under load dropped from 1.38v idle down to 1.32v with prime95 running. I am typing this on the system while it is running with priming for the last 15mintues thumb.gif

btw. I push both the HT link and the NB to 2400 MHz, not sure if that helps anything, it was there and just seem like the thing to do?

btw. 20 minutes into this one of the core has failed (last in the list).


Edited by erase - 11/4/12 at 2:38am
post #2424 of 67226
^^ too hot^^

edit; 20 IBT run stable at 4.8ghz



Edit again; but not prime blend stable. Any ideas guys?
Edited by wolvers - 11/4/12 at 2:39am
post #2425 of 67226
Quote:
Originally Posted by FX-8320 View Post

umm dam high. I just download prime95 with hwmonitor and this thing sound like a giant mosquito, the rev counter will not register any higher. I can't be sure, but the temp of the cpu went high to and then is now stuck on 80c and all cores are 66c with the load is on.
Have got all the power states set to disabled. Not sure how I am going to back off the temp, I am think that it will over 65c even at stock speeds, as the VID is a dam high 1.38v stock
The voltage under load dropped from 1.38v idle down to 1.32v with prime95 running. I am typing this on the system while it is running with priming for the last 15mintues thumb.gif
btw. I push both the HT link and the NB to 2400 MHz, not sure if that helps anything, it was there and just seem like the thing to do?
btw. 20 minutes into this one of the core has failed (last in the list).


Seems that the stock cooler cannot handle beyond that. Try maybe 2200 nb/ht or lower, that might lower them a tad. Or maybe resetting the block? If you are willing a hyper 212 is pretty cheap and should be able to get you to at least 4.5-6. Sounds like a failure do to temps, not really sure though.
Edited by pwnzilla61 - 11/4/12 at 2:45am
Rigamormus
(19 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-8350@5Ghz Asus Crosshair V Formula MSI GTX 680 Lightning@1333+600mem 8gb Gskill Sniper 1600 9-9-9-24 
Hard DriveHard DriveHard DriveOptical Drive
2x500gb Crucial M4 OCZ Vertex III walmart brand 
CoolingCoolingOSMonitor
Raystorm custom loop. Coolgate 360 Windows 7 64 Ultimate LG IPS236v 
KeyboardPowerCaseMouse
Razer Black Widow Ultimate 2013 Corsair TX850M Corsair 600t SE Razer Deathadder 
Mouse PadAudioAudio
OCZ Regulator Razer Tiamat 2.2 Creative Sound Blaster Recon3D/audigy 
  hide details  
Reply
Rigamormus
(19 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-8350@5Ghz Asus Crosshair V Formula MSI GTX 680 Lightning@1333+600mem 8gb Gskill Sniper 1600 9-9-9-24 
Hard DriveHard DriveHard DriveOptical Drive
2x500gb Crucial M4 OCZ Vertex III walmart brand 
CoolingCoolingOSMonitor
Raystorm custom loop. Coolgate 360 Windows 7 64 Ultimate LG IPS236v 
KeyboardPowerCaseMouse
Razer Black Widow Ultimate 2013 Corsair TX850M Corsair 600t SE Razer Deathadder 
Mouse PadAudioAudio
OCZ Regulator Razer Tiamat 2.2 Creative Sound Blaster Recon3D/audigy 
  hide details  
Reply
post #2426 of 67226
Quote:
Originally Posted by KyadCK View Post

1600 9-9-9-24 1T: 11.23 GB/s

2133 11-11-11-30 2T: 11.97 GB/s
One of the better scores I've seen with this cpu. What's up with the reverse scaling on this. Loose timings= better scores???

* Why are people running IBT without maximizing memory allocated? If you are only using 1024 mb of memory, you're not really getting accurate results!
Edited by hotrod717 - 11/4/12 at 3:14am
    
CPUMotherboardGraphicsRAM
Intel 5820k Asrock x99 OCF V3.1 One of many Kingston HyperX Predator 
Hard DriveOptical DriveCoolingOS
Samsung 840 EVO Asus Bluray Custom Water Win7 Ultimate 
MonitorPowerCaseMouse
Asus VG248QE EVGA P1200 Mountain Mods Extended Custom U2-UFO  Mad Catz R.A.T 5 
Mouse PadAudio
steelseries M-Audio BX5a DLX 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel 5820k Asrock x99 OCF V3.1 One of many Kingston HyperX Predator 
Hard DriveOptical DriveCoolingOS
Samsung 840 EVO Asus Bluray Custom Water Win7 Ultimate 
MonitorPowerCaseMouse
Asus VG248QE EVGA P1200 Mountain Mods Extended Custom U2-UFO  Mad Catz R.A.T 5 
Mouse PadAudio
steelseries M-Audio BX5a DLX 
  hide details  
Reply
post #2427 of 67226
Quote:
Originally Posted by hotrod717 View Post

One of the better scores I've seen with this cpu. What's up with the reverse scaling on this. Loose timings= better scores???
* Why are people running IBT without maximizing memory allocated? If you are only using 1024 mb of memory, you're not really getting accurate results!

I still think something is wrong with maxmem 1.99 on pd's I get way better benches that line up with other performance benches (anything that uses memory like IBT, gflops go up (42 to 44) but maxmem scores go down??) using things like Aida's memory and cache test, where maxmem states I would only be pushing 9gb score (10copy,9read,5write), I would get 15read/12write/19copy and much lower ns scores..
Edited by endevite - 11/4/12 at 3:27am
post #2428 of 67226
Quote:
Originally Posted by hotrod717 View Post

One of the better scores I've seen with this cpu. What's up with the reverse scaling on this. Loose timings= better scores???
1600MHz vs 2133MHz
Quote:
* Why are people running IBT without maximizing memory allocated? If you are only using 1024 mb of memory, you're not really getting accurate results!
Then I shall update my comparison result, in case, and because I did post one before with 1024MB
Code:
IntelBurnTest v2.54
Created by AgentGOD
----------------------------

Processor: AMD Phenom(tm) II X6 1055T Processor
Clock Speed: 4,12 GHz
Active Physical Cores: 6
Total System Memory: 8113 MB

Stress Level: Very High (4096 MB)
Testing started on 2012-11-01 09:59:32
Time (s)           Speed (GFlops)          Result
99.112              77.7681                3.088224e-002
Testing ended on 2012-11-01 10:02:13
Test Result: Success.
----------------------------
No PD for me until at least next spring, need a new case to fight this massive heat that this clock generates, and shove a loop in it biggrin.gif
EDIT: wheee.gif 560th post!
Edited by Tarnix - 11/4/12 at 3:33am
Flailbox 2.5
(17 items)
 
 
CPUMotherboardGraphicsRAM
i7-4790K Gigabyte Z97X-UD3H-BK evga GTX 970 SC Mushkin Enhanced Blackline (997123F) 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 840 Pro Western Digital RED 1TB Kingston HyperX Savage Some random UltraSpeed Rewritable Lightscrible-... 
CoolingOSMonitorKeyboard
Phanteks PH-TC14PE 140mm UFB Windows 10 Pro Philips 227ELPH Logitech G710+ 
PowerCaseMouseMouse Pad
EVGA Supernova 750 G2 Fractal Design Define R4 Logitech G600 Star Citizen "Drake Interplanetary" Edition Gol... 
Audio
Creative SoundBlaster Zx 
  hide details  
Reply
Flailbox 2.5
(17 items)
 
 
CPUMotherboardGraphicsRAM
i7-4790K Gigabyte Z97X-UD3H-BK evga GTX 970 SC Mushkin Enhanced Blackline (997123F) 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 840 Pro Western Digital RED 1TB Kingston HyperX Savage Some random UltraSpeed Rewritable Lightscrible-... 
CoolingOSMonitorKeyboard
Phanteks PH-TC14PE 140mm UFB Windows 10 Pro Philips 227ELPH Logitech G710+ 
PowerCaseMouseMouse Pad
EVGA Supernova 750 G2 Fractal Design Define R4 Logitech G600 Star Citizen "Drake Interplanetary" Edition Gol... 
Audio
Creative SoundBlaster Zx 
  hide details  
Reply
post #2429 of 67226
well i got my ram and 8350 installed-now what do i do-lol
wait a pain in the but to change them out.
i didnt want to drain my loop, so i did it the easy way?-lmao



quick IBT on stock settings, just 10 runs (i did up the volts to 1.4) and ram set at 2133.


my rad fans are running half speed.
i ran ibt at standard, i will run maximum once i start OCing.



-dimwit-
New One
(17 items)
 
  
CPUMotherboardGraphicsRAM
FX-8350 SABERTOOTH 990FX MSI 7950 TF3 2x4GB GSkill 2133 
Hard DriveHard DriveOptical DriveCooling
Crucial 256GB-OS/Steam 1.5TB WD Storage none-yup,none!!! XSPC Rasa 750 RS240 & EX280 (cpu & gpu) 
OSMonitorKeyboardPower
Windows 8 64bit Crossover 27" Max Nighthawk X8 (Browns) SeaSonic X Series X-850 
CaseMouseMouse PadAudio
Corsair 650D Razer DeathAdder Kitchen Table Xonar STX 
Other
HD 598's 
  hide details  
Reply
New One
(17 items)
 
  
CPUMotherboardGraphicsRAM
FX-8350 SABERTOOTH 990FX MSI 7950 TF3 2x4GB GSkill 2133 
Hard DriveHard DriveOptical DriveCooling
Crucial 256GB-OS/Steam 1.5TB WD Storage none-yup,none!!! XSPC Rasa 750 RS240 & EX280 (cpu & gpu) 
OSMonitorKeyboardPower
Windows 8 64bit Crossover 27" Max Nighthawk X8 (Browns) SeaSonic X Series X-850 
CaseMouseMouse PadAudio
Corsair 650D Razer DeathAdder Kitchen Table Xonar STX 
Other
HD 598's 
  hide details  
Reply
post #2430 of 67226
Quote:
Originally Posted by Tarnix View Post

1600MHz vs 2133MHz
Then I shall update my comparison result, in case, and because I did post one before with 1024MB
Code:
IntelBurnTest v2.54
Created by AgentGOD
----------------------------
Processor: AMD Phenom(tm) II X6 1055T Processor
Clock Speed: 4,12 GHz
Active Physical Cores: 6
Total System Memory: 8113 MB
Stress Level: Very High (4096 MB)
Testing started on 2012-11-01 09:59:32
Time (s)           Speed (GFlops)          Result
99.112              77.7681                3.088224e-002
Testing ended on 2012-11-01 10:02:13
Test Result: Success.
----------------------------
No PD for me until at least next spring, need a new case to fight this massive heat that this clock generates, and shove a loop in it biggrin.gif
EDIT: wheee.gif 560th post!
You'll be happy with a loop. My temps dropped 8-10* w/ a rx360/ raystorm combo. Check ebay.
    
CPUMotherboardGraphicsRAM
Intel 5820k Asrock x99 OCF V3.1 One of many Kingston HyperX Predator 
Hard DriveOptical DriveCoolingOS
Samsung 840 EVO Asus Bluray Custom Water Win7 Ultimate 
MonitorPowerCaseMouse
Asus VG248QE EVGA P1200 Mountain Mods Extended Custom U2-UFO  Mad Catz R.A.T 5 
Mouse PadAudio
steelseries M-Audio BX5a DLX 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel 5820k Asrock x99 OCF V3.1 One of many Kingston HyperX Predator 
Hard DriveOptical DriveCoolingOS
Samsung 840 EVO Asus Bluray Custom Water Win7 Ultimate 
MonitorPowerCaseMouse
Asus VG248QE EVGA P1200 Mountain Mods Extended Custom U2-UFO  Mad Catz R.A.T 5 
Mouse PadAudio
steelseries M-Audio BX5a DLX 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › [OFFICIAL] FX-8320/FX-8350 Vishera Owners Club