Originally Posted by UnStableFPS
Thanks for the reply. Maybe I have the H110 setup wrong. I have it for exhaust with the fans on top of the rad. Maybe I should put them on the bottom with the rad mounted to the top of the case. I don't have room for a push/pull setup.
did you use stock tim?
Originally Posted by os2wiz
Why if the ram is set to 2400 does he need cpu/nb any higher than 2400MHZ?? Doesn't make sense to create all that heat. Why drop HT link speed to 2200MHZ. When stock is 2600 MHZ?? Also makes no sense. Ht Link is not dram dependent.
i never said it had to be, i have told him across several threads it needs to be @ or above ram speed, he currently was trying to run 200cpu/nb with ram @2400...
then i told him what should work as i have seen, in most cases.
Originally Posted by dmfree88
i cant overclock my nb if it makes you feel any better. my ud5 says no to nb overclock. no matter how high i put the voltage windows aero fails to work everytime i boot into windows. even at one bump to 2400 failure at any increase in voltage.. works perfect at 2200 tho so whatever
i bet you have a rev3.0/4.0 for whatever reason x12 cpu/nb is broken try x13 ( 2600 ) assuming you have a stock FSB and i bet it will work with minimal volts.