Originally Posted by ShadowMAN280x
The PSU is a Corsair TX850 Bronze
Bone stock settings I get 55C on water...The FX8320 restorers guide on page one for DIGI+ at stock 1.3v at 4.2Ghz puts the CPU at 70C+ in under
a minute on water.
I have a open workbench case...so modding is easy. The NB does get super hot...like burning hot....yep...just felt it it'll burn you;) I'll blow the Corsair H90 fan on the NB heatsink...really think that would drop the CPU temps to normal?
try everything @ stock. but lock it down
meaning as little auto settings as possible. so look in your Ram SPD for the XMP or whatever profiles lock those in for what you can.
find out your Vid or switch to offset mod and don't touch the voltage offsets. this is a good way to make sure you are not overvolting or undervolting at this point.
if you are getting 55*c @ bone stock settings there something IS wrong. I would look at the mount of the cooler, also case airflow. making sure all fan headers are plugged in all the way. make sure the hoses are not kinked in any way
I would expect temps AT most at bone stock to push 45* and at worst case 50 if you've bunged your air flow or whatever.
i'm running a 8350 @ 4.6 / 1.46v and I don't break 45* gaming, 52-54* prime. using a H100i in pull configuration. ( yes i know apples to pinapples) but given the variance between H90 and H100 you shouldn't be getting my OC temp while at bone stock. it just doesn't make any sense.
ps. might be an idea to check how your fan controller is set. for all you know your pump and your rad fan might be running at 40% duty :/Edited by FlailScHLAMP - 11/20/13 at 11:36pm