Originally Posted by FoamyV
So should i up the nb voltage to 1.35? prime is still running; after 15 minutes max 60 on socket and 59 on core, no errors so far, clock is at 4.515 and volt at load 1.464.
NB voltage does not need to exceed 1.2v
for 2400mhz ram, your gunna want to OC the HT too atleast 2600mhz (should do this on stock ht voltage or a few notchs up from stock voltage)
The CPU/NB i would suggest to set @ 1.35v
Keep in mind you can get 2400mhz ram working with less HT and less voltage but you will not see ANY advantages over 2133mhz ram. also another thing is if you are not using the bandwidth you will not notice a thing.
CPU/NB and NB are two entirely different things.
CPU/NB is the integrated memory controller voltage.
NB is for your north bridge chip set, this doesn't need much attention if any unless your are FSB overclocking, but lets not get into that just yet.. ya?
FYI: increasing the CPU/NB voltage will add heat to your processor. something to keep in mind also.