Originally Posted by F3ERS 2 ASH3S
um... cause I has 2.. already
Change that rig in your sig.
Originally Posted by mus1mus
Visheras will never get Overkill Cooling. At least for me. Remember we are not limited by Voltages. Cooling dictates our clocks.
On that note, couple high fpi 360 slims here. Still not enough. So yeah, Overkill is not killing it.
High FPI doesn't always need high RPM/Noisy fans.
My GT Stealth and EX take full flight with 1300 RPM Fans in Push Pull. Swapping them over to 3000+ Deltas proved no gains in temps.\
Also note that 50-60 dBa translate to 4000+ RPMs on my Deltas.
Thats true. Cooling is all in these chips.
But that is another story.
When you do push pull on thin rads it will work. But I have only push on my UT60 and it works good with low rpm on my AP-15's
Originally Posted by By-Tor
High FPI rads req. good static pressure fans, not high CFM fans with crap static pressure... Some Delta's have good static pressure...
I ran five of these for years and they do pull hard..
You are right.
I was very sleepy when I posted that yesterday. Rpm is nothing when the pressure is low.
I've seen my share of people putting 3k rpm Ultra Kaze on rads and complaining it didn't cool very well.
Nice share. I didn't know there were 3 blade versions.
How do these perform when controlled to about 1500-2000 rpm?
I doubt it will make a big difference to my rad cooling though.