Overclock.net › Forums › AMD › AMD CPUs › [OFFICIAL] FX-8320/FX-8350 Vishera Owners Club
New Posts  All Forums:Forum Nav:

[OFFICIAL] FX-8320/FX-8350 Vishera Owners Club - Page 4168

post #41671 of 67894
Ok so I need some help. I'm running a custom water setup. Fx. 8350 on a sabertooth 990fx 2.0 board. I have three sp120 high performance pwm fans and 1 pwm pump. Seeing as I have only two pwm headers cpu fan and cpu opt. I bought a pwm spiltter to run all of the. Two on cpu fan two on cpu opt. I have my bios for high limit 54 at. 100 percent and low for 20 at 40 percent. My question is if I want to run a certain speed at all times say 50 percent do I just set high and low limit for the same percentage in the bios. Also is it normal for bios and in windows to only show rpms for cpu fan and not the cpu opt (I figured bc there both technically sharing the same I may be wrong though). Also at times one of the sp120 fans I have on the cpu opt will have a humming/grinding sound at times. Any suggestions thank you Jim. If needed build log is linked below http://www.overclock.net/t/1519439/blue-blurry-build-log-by-itzems-phanteks-enthoo-pro-case#post_23042749
    
CPUMotherboardGraphicsRAM
Intel i7 4790k @ 4.8ghz 1.29v Asus z97 Pro gxt 780 sc Overclocked Kingston Fury 1600 ddr3 ram 
Hard DriveHard DriveOptical DriveCooling
WD Blue 1tb Samsung 840 evo asus swiftech mcp35x 
CoolingCoolingCoolingCooling
ek fc 780 gpu block for gtx 780 ek gtx 780 backplate Petg primochill tubing Primochill Revolver Fittings Silver 
CoolingCoolingCoolingCooling
Bitspower 150ml Reservior multi z tank Bitspower acrylic ddc pump top (polished) ek ddc black housing ek csq 90 adapter fittings 
CoolingCoolingCoolingCooling
xspc 360 rad swiftech 240 rad 5 sp120 corsair pwm high performance fans on sw... 3 corsair af140mm fans 
OSMonitorKeyboardPower
windows 8.1 asus 144hz 1080p monitor razer blackwidow mechanical tournment edition Seasonic 850watt semi modular 80 plus bronze m1... 
CaseMouseMouse PadAudio
Phanteks Enthoo Pro Black Steel Series Rival Steel Series QCK Creative Sound Blaster Z 
AudioAudioAudio
Sennheiser hd558 head phones Modmic Radioshack Surround sound speakers, Un sure of ... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel i7 4790k @ 4.8ghz 1.29v Asus z97 Pro gxt 780 sc Overclocked Kingston Fury 1600 ddr3 ram 
Hard DriveHard DriveOptical DriveCooling
WD Blue 1tb Samsung 840 evo asus swiftech mcp35x 
CoolingCoolingCoolingCooling
ek fc 780 gpu block for gtx 780 ek gtx 780 backplate Petg primochill tubing Primochill Revolver Fittings Silver 
CoolingCoolingCoolingCooling
Bitspower 150ml Reservior multi z tank Bitspower acrylic ddc pump top (polished) ek ddc black housing ek csq 90 adapter fittings 
CoolingCoolingCoolingCooling
xspc 360 rad swiftech 240 rad 5 sp120 corsair pwm high performance fans on sw... 3 corsair af140mm fans 
OSMonitorKeyboardPower
windows 8.1 asus 144hz 1080p monitor razer blackwidow mechanical tournment edition Seasonic 850watt semi modular 80 plus bronze m1... 
CaseMouseMouse PadAudio
Phanteks Enthoo Pro Black Steel Series Rival Steel Series QCK Creative Sound Blaster Z 
AudioAudioAudio
Sennheiser hd558 head phones Modmic Radioshack Surround sound speakers, Un sure of ... 
  hide details  
Reply
post #41672 of 67894
Slowly climbing the ladder again.



Finally received my new EK waterblock yesterday...
So gonna redo the loop at last, this weekend.


Haven't tested if the ram can be tightened more... will probably not help much anyway.
Getting 2400 ram stable with a high cpu clock is a bit hard. Well... the voltage needed is just too much.
Anything else to tweak to get the ram stable at 2400 instead of 2133?

cpu-nb is @ 1.3v atm
Edited by Chopper1591 - 10/24/14 at 10:36am
    
CPUMotherboardGraphicsRAM
6700k viii hero Sapphire r9 290 tri-x OC g.skill 3000 16gb 
Hard DriveHard DriveOptical DriveCooling
WD Caviar Black Sata-3 64MB 840 evo DVD R/W Combo Alphacool 360 ut60 
CoolingCoolingCoolingCooling
EK-FC R9-290X - Acetal+Nickel (Rev.2.0) EK-FC R9-290X Backplate - Black EK-FC R9-290X Reinforcer - Black Fittings and adapters 
CoolingCoolingCoolingCooling
Ek supremacy EVO ek 420 radiator ek revo d5 Bitspower acrylic tubing 
OSMonitorKeyboardPower
Windows 10 pro BenQ XL2730Z Ducky One DKON1508S Corsair HX850i 
CaseMouseMouse PadAudio
Phanteks Enthoo Primo Mionix Castor Razer Goliathus Edifier C3X 
AudioOther
Asus xonar dx Xbox one gamepad 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
6700k viii hero Sapphire r9 290 tri-x OC g.skill 3000 16gb 
Hard DriveHard DriveOptical DriveCooling
WD Caviar Black Sata-3 64MB 840 evo DVD R/W Combo Alphacool 360 ut60 
CoolingCoolingCoolingCooling
EK-FC R9-290X - Acetal+Nickel (Rev.2.0) EK-FC R9-290X Backplate - Black EK-FC R9-290X Reinforcer - Black Fittings and adapters 
CoolingCoolingCoolingCooling
Ek supremacy EVO ek 420 radiator ek revo d5 Bitspower acrylic tubing 
OSMonitorKeyboardPower
Windows 10 pro BenQ XL2730Z Ducky One DKON1508S Corsair HX850i 
CaseMouseMouse PadAudio
Phanteks Enthoo Primo Mionix Castor Razer Goliathus Edifier C3X 
AudioOther
Asus xonar dx Xbox one gamepad 
  hide details  
Reply
post #41673 of 67894
What block did you get. I just I stalled my ek supremacy copper plexi last week love the performance and looks
    
CPUMotherboardGraphicsRAM
Intel i7 4790k @ 4.8ghz 1.29v Asus z97 Pro gxt 780 sc Overclocked Kingston Fury 1600 ddr3 ram 
Hard DriveHard DriveOptical DriveCooling
WD Blue 1tb Samsung 840 evo asus swiftech mcp35x 
CoolingCoolingCoolingCooling
ek fc 780 gpu block for gtx 780 ek gtx 780 backplate Petg primochill tubing Primochill Revolver Fittings Silver 
CoolingCoolingCoolingCooling
Bitspower 150ml Reservior multi z tank Bitspower acrylic ddc pump top (polished) ek ddc black housing ek csq 90 adapter fittings 
CoolingCoolingCoolingCooling
xspc 360 rad swiftech 240 rad 5 sp120 corsair pwm high performance fans on sw... 3 corsair af140mm fans 
OSMonitorKeyboardPower
windows 8.1 asus 144hz 1080p monitor razer blackwidow mechanical tournment edition Seasonic 850watt semi modular 80 plus bronze m1... 
CaseMouseMouse PadAudio
Phanteks Enthoo Pro Black Steel Series Rival Steel Series QCK Creative Sound Blaster Z 
AudioAudioAudio
Sennheiser hd558 head phones Modmic Radioshack Surround sound speakers, Un sure of ... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel i7 4790k @ 4.8ghz 1.29v Asus z97 Pro gxt 780 sc Overclocked Kingston Fury 1600 ddr3 ram 
Hard DriveHard DriveOptical DriveCooling
WD Blue 1tb Samsung 840 evo asus swiftech mcp35x 
CoolingCoolingCoolingCooling
ek fc 780 gpu block for gtx 780 ek gtx 780 backplate Petg primochill tubing Primochill Revolver Fittings Silver 
CoolingCoolingCoolingCooling
Bitspower 150ml Reservior multi z tank Bitspower acrylic ddc pump top (polished) ek ddc black housing ek csq 90 adapter fittings 
CoolingCoolingCoolingCooling
xspc 360 rad swiftech 240 rad 5 sp120 corsair pwm high performance fans on sw... 3 corsair af140mm fans 
OSMonitorKeyboardPower
windows 8.1 asus 144hz 1080p monitor razer blackwidow mechanical tournment edition Seasonic 850watt semi modular 80 plus bronze m1... 
CaseMouseMouse PadAudio
Phanteks Enthoo Pro Black Steel Series Rival Steel Series QCK Creative Sound Blaster Z 
AudioAudioAudio
Sennheiser hd558 head phones Modmic Radioshack Surround sound speakers, Un sure of ... 
  hide details  
Reply
post #41674 of 67894
So hot topic of debate. What way do you put your paste on a 8350. I tried dot and line method server all times (only a grain if rice) yet spreading it evenly myself works best everytime.
    
CPUMotherboardGraphicsRAM
Intel i7 4790k @ 4.8ghz 1.29v Asus z97 Pro gxt 780 sc Overclocked Kingston Fury 1600 ddr3 ram 
Hard DriveHard DriveOptical DriveCooling
WD Blue 1tb Samsung 840 evo asus swiftech mcp35x 
CoolingCoolingCoolingCooling
ek fc 780 gpu block for gtx 780 ek gtx 780 backplate Petg primochill tubing Primochill Revolver Fittings Silver 
CoolingCoolingCoolingCooling
Bitspower 150ml Reservior multi z tank Bitspower acrylic ddc pump top (polished) ek ddc black housing ek csq 90 adapter fittings 
CoolingCoolingCoolingCooling
xspc 360 rad swiftech 240 rad 5 sp120 corsair pwm high performance fans on sw... 3 corsair af140mm fans 
OSMonitorKeyboardPower
windows 8.1 asus 144hz 1080p monitor razer blackwidow mechanical tournment edition Seasonic 850watt semi modular 80 plus bronze m1... 
CaseMouseMouse PadAudio
Phanteks Enthoo Pro Black Steel Series Rival Steel Series QCK Creative Sound Blaster Z 
AudioAudioAudio
Sennheiser hd558 head phones Modmic Radioshack Surround sound speakers, Un sure of ... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel i7 4790k @ 4.8ghz 1.29v Asus z97 Pro gxt 780 sc Overclocked Kingston Fury 1600 ddr3 ram 
Hard DriveHard DriveOptical DriveCooling
WD Blue 1tb Samsung 840 evo asus swiftech mcp35x 
CoolingCoolingCoolingCooling
ek fc 780 gpu block for gtx 780 ek gtx 780 backplate Petg primochill tubing Primochill Revolver Fittings Silver 
CoolingCoolingCoolingCooling
Bitspower 150ml Reservior multi z tank Bitspower acrylic ddc pump top (polished) ek ddc black housing ek csq 90 adapter fittings 
CoolingCoolingCoolingCooling
xspc 360 rad swiftech 240 rad 5 sp120 corsair pwm high performance fans on sw... 3 corsair af140mm fans 
OSMonitorKeyboardPower
windows 8.1 asus 144hz 1080p monitor razer blackwidow mechanical tournment edition Seasonic 850watt semi modular 80 plus bronze m1... 
CaseMouseMouse PadAudio
Phanteks Enthoo Pro Black Steel Series Rival Steel Series QCK Creative Sound Blaster Z 
AudioAudioAudio
Sennheiser hd558 head phones Modmic Radioshack Surround sound speakers, Un sure of ... 
  hide details  
Reply
post #41675 of 67894
Quote:
Originally Posted by Chopper1591 View Post

Slowly climbing the ladder again.



Finally received my new EK waterblock yesterday...
So gonna redo the loop at last, this weekend.

at last, then hopefully your temps get better thumb.gif

looking forward to seeing it finished

take some pics of your new loop will ya
Quote:
Originally Posted by emsj86 View Post

So hot topic of debate. What way do you put your paste on a 8350. I tried dot and line method server all times (only a grain if rice) yet spreading it evenly myself works best everytime.

i always use the pea method for mx-4 but does depend on which paste it is, the more thicker stuff i spread
My Rig
(11 items)
 
  
CPUMotherboardGraphicsRAM
FX-8370 asus sabertooth 990fx R9 290 DC2 kingston hyper x beast 1866 
CoolingOSMonitorKeyboard
fractal design kelvin s36 windows 10 pro Acer G245HQ Saitek Cyborg V5 
PowerCaseMouse
EVGA SuperNOVA 1000 G2 Corsair Graphite series 780T corsair m90 
  hide details  
Reply
My Rig
(11 items)
 
  
CPUMotherboardGraphicsRAM
FX-8370 asus sabertooth 990fx R9 290 DC2 kingston hyper x beast 1866 
CoolingOSMonitorKeyboard
fractal design kelvin s36 windows 10 pro Acer G245HQ Saitek Cyborg V5 
PowerCaseMouse
EVGA SuperNOVA 1000 G2 Corsair Graphite series 780T corsair m90 
  hide details  
Reply
post #41676 of 67894
I use attic silver 5 and using dot method it doesn't spread out so well so spreading seems to work for me
    
CPUMotherboardGraphicsRAM
Intel i7 4790k @ 4.8ghz 1.29v Asus z97 Pro gxt 780 sc Overclocked Kingston Fury 1600 ddr3 ram 
Hard DriveHard DriveOptical DriveCooling
WD Blue 1tb Samsung 840 evo asus swiftech mcp35x 
CoolingCoolingCoolingCooling
ek fc 780 gpu block for gtx 780 ek gtx 780 backplate Petg primochill tubing Primochill Revolver Fittings Silver 
CoolingCoolingCoolingCooling
Bitspower 150ml Reservior multi z tank Bitspower acrylic ddc pump top (polished) ek ddc black housing ek csq 90 adapter fittings 
CoolingCoolingCoolingCooling
xspc 360 rad swiftech 240 rad 5 sp120 corsair pwm high performance fans on sw... 3 corsair af140mm fans 
OSMonitorKeyboardPower
windows 8.1 asus 144hz 1080p monitor razer blackwidow mechanical tournment edition Seasonic 850watt semi modular 80 plus bronze m1... 
CaseMouseMouse PadAudio
Phanteks Enthoo Pro Black Steel Series Rival Steel Series QCK Creative Sound Blaster Z 
AudioAudioAudio
Sennheiser hd558 head phones Modmic Radioshack Surround sound speakers, Un sure of ... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel i7 4790k @ 4.8ghz 1.29v Asus z97 Pro gxt 780 sc Overclocked Kingston Fury 1600 ddr3 ram 
Hard DriveHard DriveOptical DriveCooling
WD Blue 1tb Samsung 840 evo asus swiftech mcp35x 
CoolingCoolingCoolingCooling
ek fc 780 gpu block for gtx 780 ek gtx 780 backplate Petg primochill tubing Primochill Revolver Fittings Silver 
CoolingCoolingCoolingCooling
Bitspower 150ml Reservior multi z tank Bitspower acrylic ddc pump top (polished) ek ddc black housing ek csq 90 adapter fittings 
CoolingCoolingCoolingCooling
xspc 360 rad swiftech 240 rad 5 sp120 corsair pwm high performance fans on sw... 3 corsair af140mm fans 
OSMonitorKeyboardPower
windows 8.1 asus 144hz 1080p monitor razer blackwidow mechanical tournment edition Seasonic 850watt semi modular 80 plus bronze m1... 
CaseMouseMouse PadAudio
Phanteks Enthoo Pro Black Steel Series Rival Steel Series QCK Creative Sound Blaster Z 
AudioAudioAudio
Sennheiser hd558 head phones Modmic Radioshack Surround sound speakers, Un sure of ... 
  hide details  
Reply
post #41677 of 67894
How do you set your asus sabertooth 990fx 2.0 cpu pwm speed to stay at a certain speed. I'm assuming by having min and max limits the same percent
    
CPUMotherboardGraphicsRAM
Intel i7 4790k @ 4.8ghz 1.29v Asus z97 Pro gxt 780 sc Overclocked Kingston Fury 1600 ddr3 ram 
Hard DriveHard DriveOptical DriveCooling
WD Blue 1tb Samsung 840 evo asus swiftech mcp35x 
CoolingCoolingCoolingCooling
ek fc 780 gpu block for gtx 780 ek gtx 780 backplate Petg primochill tubing Primochill Revolver Fittings Silver 
CoolingCoolingCoolingCooling
Bitspower 150ml Reservior multi z tank Bitspower acrylic ddc pump top (polished) ek ddc black housing ek csq 90 adapter fittings 
CoolingCoolingCoolingCooling
xspc 360 rad swiftech 240 rad 5 sp120 corsair pwm high performance fans on sw... 3 corsair af140mm fans 
OSMonitorKeyboardPower
windows 8.1 asus 144hz 1080p monitor razer blackwidow mechanical tournment edition Seasonic 850watt semi modular 80 plus bronze m1... 
CaseMouseMouse PadAudio
Phanteks Enthoo Pro Black Steel Series Rival Steel Series QCK Creative Sound Blaster Z 
AudioAudioAudio
Sennheiser hd558 head phones Modmic Radioshack Surround sound speakers, Un sure of ... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel i7 4790k @ 4.8ghz 1.29v Asus z97 Pro gxt 780 sc Overclocked Kingston Fury 1600 ddr3 ram 
Hard DriveHard DriveOptical DriveCooling
WD Blue 1tb Samsung 840 evo asus swiftech mcp35x 
CoolingCoolingCoolingCooling
ek fc 780 gpu block for gtx 780 ek gtx 780 backplate Petg primochill tubing Primochill Revolver Fittings Silver 
CoolingCoolingCoolingCooling
Bitspower 150ml Reservior multi z tank Bitspower acrylic ddc pump top (polished) ek ddc black housing ek csq 90 adapter fittings 
CoolingCoolingCoolingCooling
xspc 360 rad swiftech 240 rad 5 sp120 corsair pwm high performance fans on sw... 3 corsair af140mm fans 
OSMonitorKeyboardPower
windows 8.1 asus 144hz 1080p monitor razer blackwidow mechanical tournment edition Seasonic 850watt semi modular 80 plus bronze m1... 
CaseMouseMouse PadAudio
Phanteks Enthoo Pro Black Steel Series Rival Steel Series QCK Creative Sound Blaster Z 
AudioAudioAudio
Sennheiser hd558 head phones Modmic Radioshack Surround sound speakers, Un sure of ... 
  hide details  
Reply
post #41678 of 67894
Quote:
Originally Posted by emsj86 View Post

What block did you get. I just I stalled my ek supremacy copper plexi last week love the performance and looks

Took a quick pic of the box with my Phone.
Looks familiar? tongue.gif


Quote:
Originally Posted by emsj86 View Post

So hot topic of debate. What way do you put your paste on a 8350. I tried dot and line method server all times (only a grain if rice) yet spreading it evenly myself works best everytime.

Since not so long now, I spread the paste.
I really think it differs from paste to paste.

In the AS5 era I swore to the pea method.

But mounting the block/cooler properly is far more important than the pasting method IMO.

thumb.gif
Quote:
Originally Posted by gertruude View Post

at last, then hopefully your temps get better thumb.gif

looking forward to seeing it finished

take some pics of your new loop will ya
i always use the pea method for mx-4 but does depend on which paste it is, the more thicker stuff i spread

Will do gerti. thumb.gif

Those temps are awfull, don't they? biggrin.gif
I think a 212 will beat me now....

No, seriously. They are really off.

Quote:
Originally Posted by emsj86 View Post

How do you set your asus sabertooth 990fx 2.0 cpu pwm speed to stay at a certain speed. I'm assuming by having min and max limits the same percent

You have the board, don't you?

Try it out. biggrin.gif
Sounds simple enough.
    
CPUMotherboardGraphicsRAM
6700k viii hero Sapphire r9 290 tri-x OC g.skill 3000 16gb 
Hard DriveHard DriveOptical DriveCooling
WD Caviar Black Sata-3 64MB 840 evo DVD R/W Combo Alphacool 360 ut60 
CoolingCoolingCoolingCooling
EK-FC R9-290X - Acetal+Nickel (Rev.2.0) EK-FC R9-290X Backplate - Black EK-FC R9-290X Reinforcer - Black Fittings and adapters 
CoolingCoolingCoolingCooling
Ek supremacy EVO ek 420 radiator ek revo d5 Bitspower acrylic tubing 
OSMonitorKeyboardPower
Windows 10 pro BenQ XL2730Z Ducky One DKON1508S Corsair HX850i 
CaseMouseMouse PadAudio
Phanteks Enthoo Primo Mionix Castor Razer Goliathus Edifier C3X 
AudioOther
Asus xonar dx Xbox one gamepad 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
6700k viii hero Sapphire r9 290 tri-x OC g.skill 3000 16gb 
Hard DriveHard DriveOptical DriveCooling
WD Caviar Black Sata-3 64MB 840 evo DVD R/W Combo Alphacool 360 ut60 
CoolingCoolingCoolingCooling
EK-FC R9-290X - Acetal+Nickel (Rev.2.0) EK-FC R9-290X Backplate - Black EK-FC R9-290X Reinforcer - Black Fittings and adapters 
CoolingCoolingCoolingCooling
Ek supremacy EVO ek 420 radiator ek revo d5 Bitspower acrylic tubing 
OSMonitorKeyboardPower
Windows 10 pro BenQ XL2730Z Ducky One DKON1508S Corsair HX850i 
CaseMouseMouse PadAudio
Phanteks Enthoo Primo Mionix Castor Razer Goliathus Edifier C3X 
AudioOther
Asus xonar dx Xbox one gamepad 
  hide details  
Reply
post #41679 of 67894
I do and will try it out. Just out work and figure maybe someone has done it or knows. And yes looks the same. Hope you don't have my luck mine was missing the insert pin. Your gonna want to change the insert to the second one take the pin from the first and use the second jet plate
    
CPUMotherboardGraphicsRAM
Intel i7 4790k @ 4.8ghz 1.29v Asus z97 Pro gxt 780 sc Overclocked Kingston Fury 1600 ddr3 ram 
Hard DriveHard DriveOptical DriveCooling
WD Blue 1tb Samsung 840 evo asus swiftech mcp35x 
CoolingCoolingCoolingCooling
ek fc 780 gpu block for gtx 780 ek gtx 780 backplate Petg primochill tubing Primochill Revolver Fittings Silver 
CoolingCoolingCoolingCooling
Bitspower 150ml Reservior multi z tank Bitspower acrylic ddc pump top (polished) ek ddc black housing ek csq 90 adapter fittings 
CoolingCoolingCoolingCooling
xspc 360 rad swiftech 240 rad 5 sp120 corsair pwm high performance fans on sw... 3 corsair af140mm fans 
OSMonitorKeyboardPower
windows 8.1 asus 144hz 1080p monitor razer blackwidow mechanical tournment edition Seasonic 850watt semi modular 80 plus bronze m1... 
CaseMouseMouse PadAudio
Phanteks Enthoo Pro Black Steel Series Rival Steel Series QCK Creative Sound Blaster Z 
AudioAudioAudio
Sennheiser hd558 head phones Modmic Radioshack Surround sound speakers, Un sure of ... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel i7 4790k @ 4.8ghz 1.29v Asus z97 Pro gxt 780 sc Overclocked Kingston Fury 1600 ddr3 ram 
Hard DriveHard DriveOptical DriveCooling
WD Blue 1tb Samsung 840 evo asus swiftech mcp35x 
CoolingCoolingCoolingCooling
ek fc 780 gpu block for gtx 780 ek gtx 780 backplate Petg primochill tubing Primochill Revolver Fittings Silver 
CoolingCoolingCoolingCooling
Bitspower 150ml Reservior multi z tank Bitspower acrylic ddc pump top (polished) ek ddc black housing ek csq 90 adapter fittings 
CoolingCoolingCoolingCooling
xspc 360 rad swiftech 240 rad 5 sp120 corsair pwm high performance fans on sw... 3 corsair af140mm fans 
OSMonitorKeyboardPower
windows 8.1 asus 144hz 1080p monitor razer blackwidow mechanical tournment edition Seasonic 850watt semi modular 80 plus bronze m1... 
CaseMouseMouse PadAudio
Phanteks Enthoo Pro Black Steel Series Rival Steel Series QCK Creative Sound Blaster Z 
AudioAudioAudio
Sennheiser hd558 head phones Modmic Radioshack Surround sound speakers, Un sure of ... 
  hide details  
Reply
post #41680 of 67894
Quote:
Originally Posted by Chopper1591 View Post

Warning: Spoiler! (Click to show)
Took a quick pic of the box with my Phone.
Looks familiar? tongue.gif


Since not so long now, I spread the paste.
I really think it differs from paste to paste.

In the AS5 era I swore to the pea method.

But mounting the block/cooler properly is far more important than the pasting method IMO.

thumb.gif
Will do gerti. thumb.gif

Those temps are awfull, don't they? biggrin.gif
I think a 212 will beat me now.....

aye they will kick yer butt rolleyes.gif
is your pump working right or fans working right

i had a similar experience a few weeks ago, with temps getting higher, couldn't fathom it out. then looked inside case and saw 3 fans not working on my rad, only a 6C difference but still it was noticeable
My Rig
(11 items)
 
  
CPUMotherboardGraphicsRAM
FX-8370 asus sabertooth 990fx R9 290 DC2 kingston hyper x beast 1866 
CoolingOSMonitorKeyboard
fractal design kelvin s36 windows 10 pro Acer G245HQ Saitek Cyborg V5 
PowerCaseMouse
EVGA SuperNOVA 1000 G2 Corsair Graphite series 780T corsair m90 
  hide details  
Reply
My Rig
(11 items)
 
  
CPUMotherboardGraphicsRAM
FX-8370 asus sabertooth 990fx R9 290 DC2 kingston hyper x beast 1866 
CoolingOSMonitorKeyboard
fractal design kelvin s36 windows 10 pro Acer G245HQ Saitek Cyborg V5 
PowerCaseMouse
EVGA SuperNOVA 1000 G2 Corsair Graphite series 780T corsair m90 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › [OFFICIAL] FX-8320/FX-8350 Vishera Owners Club