Originally Posted by F3ERS 2 ASH3S
Pretty SURE from YOUR SCREEN SHOTS YOUR VOLTAGE IS 1.58 so YOU DISPROVED YOURSELFALWAYS USE THE VOLTAGE UNDER LOAD AS THE VOLTAGE YOU REFER TO
LLC will add voltage.. I could have my computer boot at 1.52v as well if needed at 5.1GHz but it is not stable til 1.68v see why this makes a huge difference?
You need to get your eyes checked out as it looks like you are blind in one eye and can't see out of the other. In that Kahuna Dumpster are screenies from multiple runs both while running and finished.
The Sabertooth LLC is set to medium (I think) and the vcore is set to 1.6 in bios. The goal was to get it running at 1.512 or 1.524 under full load. Don't care about idle volts.