ok so i upped my ram voltage to 1.67 and dropped the refresh rate and the response time to 160 from 300 so far so good... also is at 1t timing... gonna try ibt again and see if it fails if it does ill look into possibly higher voltage although i dont like the idea of my 8320e taking more voltage than my 8320 did at 4.8
EDIT: first 2 runs were much faster and consistent with times and flops but failed on the third... going to try a few more setting see what happens..... ok so this is i set the voltage in the bios to 1.49 just to see if upping the vcore helped.. upon doing so loading up hwinfo64 and running ibt avx on very high.. my voltage didnt move above 1.46.... wth is going on here? before i upped the vcore from 1.48 to 1.49 it was idling around 1.46 and hitting 1.488 under load.... this is odd...apparently dropping llc doesnt help with over shoot it keeps wanting to default me to 1.46 in windows....this last time it didnt budge above that 1.46 even under load
EDIT2: With llc on very high and vcore at the same bumped 1.49 it overshoots to 1.50 and only passes one more run of very high ibt with slower and less consistent scores
also temps are a lot higher for .012 jump in vcore? looking at 9C difference anyway any thoughts?
I also noticed this in the bios the vcore fluctuates from 1.76 to 1.88 every few seconds is that normal?
bios fluctuation (Click to show)
Edited by mfknjadagr8 - 1/6/15 at 7:34pm
This one is the vcore defaulting to 1.46 in the bios and windows
these two are the fluctuations taken just seconds apart