Overclock.net › Forums › AMD › AMD CPUs › [OFFICIAL] FX-8320/FX-8350 Vishera Owners Club
New Posts  All Forums:Forum Nav:

[OFFICIAL] FX-8320/FX-8350 Vishera Owners Club - Page 5378

post #53771 of 67713
Quote:
Originally Posted by Mike The Owl View Post

Quote:
Originally Posted by dmcl325i View Post

@mike, i dropped down to 16gb ram (2x8) from 32gb to see if that would help. Hasnt seemed to make a damn bit of difference though. Im using kingston hyperx savage 2400 at the minute, running it at 2133mhz as theres no 2400mhz option in my bios... Maybe need to up cpu nb and ht link speeds as they are 2200 and 2400 respectively. I did briefly try to up cpu nb and ht link but wouldnt even load bios so i had to pull cmos battery.

I also cant seem to make any changes to cpu fsb frequency. I did try to lower the multiplier and up the cpu fsb as that increases nb and ht link but once i reboot the changes are gone and the multiplier i set remains.

@chopper, i am still running 4.7ghz

Try running your ram at stock whilst overclocking the CPU, when stable with the CPU you can then start overclocking the ram. I found my 5.1 overclock was stable on 1600mhz but it became unstable when I clocked the ram to 2133mhz, I dropped my clock to 4.9 and all ran well.

All I'm saying is get one thing right at a time...

He will need to OC the FSB a tad bit to get the 2400 frequency...
Wet Billy
(15 items)
 
PHENOM Phoenix
(13 items)
 
 
CPUMotherboardGraphicsRAM
AMD FX 8350 @ 5.06GHz AsUS Sabertooth R2.0 xfx 280x DD Crucial Ballistex Tactical Tracer 1866Mhz 
Hard DriveOptical DriveCoolingCooling
Samsung 830 SSD 128GB LG BD-ROM/DVD Rewriter XSPC Raystorm RS240 kit A LOT OF FANS 
OSMonitorKeyboardPower
WIN 7 ultamate AOC 23" LED LCD Microsoft wireless laser 6000 Rosewill Capstone 750w 
CaseMouseMouse Pad
Coolermaster HAF 912 Microsoft wireless laser 6000 none 
CPUMotherboardGraphicsGraphics
phenom II x6 1100T MSI 990FXA-GD65 GTX 460 GTX 460 
RAMHard DriveOptical DriveCooling
Crucial Ballistix Tactical Tracer 8GB (2 x 4GB)... Samsung SSD 830  LG Blueray Coolermaster N520 
OSMonitorKeyboardPower
Win 7 Ultimate x64 AOC 1080p LED Microsoft OCZ 850w 
Case
Coolermaster HAF 912 
  hide details  
Reply
Wet Billy
(15 items)
 
PHENOM Phoenix
(13 items)
 
 
CPUMotherboardGraphicsRAM
AMD FX 8350 @ 5.06GHz AsUS Sabertooth R2.0 xfx 280x DD Crucial Ballistex Tactical Tracer 1866Mhz 
Hard DriveOptical DriveCoolingCooling
Samsung 830 SSD 128GB LG BD-ROM/DVD Rewriter XSPC Raystorm RS240 kit A LOT OF FANS 
OSMonitorKeyboardPower
WIN 7 ultamate AOC 23" LED LCD Microsoft wireless laser 6000 Rosewill Capstone 750w 
CaseMouseMouse Pad
Coolermaster HAF 912 Microsoft wireless laser 6000 none 
CPUMotherboardGraphicsGraphics
phenom II x6 1100T MSI 990FXA-GD65 GTX 460 GTX 460 
RAMHard DriveOptical DriveCooling
Crucial Ballistix Tactical Tracer 8GB (2 x 4GB)... Samsung SSD 830  LG Blueray Coolermaster N520 
OSMonitorKeyboardPower
Win 7 Ultimate x64 AOC 1080p LED Microsoft OCZ 850w 
Case
Coolermaster HAF 912 
  hide details  
Reply
post #53772 of 67713
Ok will bear that in mind..

I think i figured out why i couldnt raise cpu nb frequency or ht link. I have only been adjusting cpu nb voltage, vcore and dram. Nb and sb voltage has been left on auto since the beginning. I just bumped nb voltage and its taken a 200mhz increase on cpu nb and ht link. Im running a few passes on very hard in IBT and (touch wood) its on the 4th pass with no problems yet.

On a side note the freeze test animation does not seem as choppy having raised nb and ht link speeds by 200mhz.
Black Death
(21 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX 8350 MSI 970 Gaming Palit GTX 1080 Super Jetstream Kingston Hyper X Savage 
Hard DriveHard DriveOptical DriveCooling
Sandisk SSD Seagate Hybrid LG Blu Ray Corsair H55 Liquid CPU Cooler 
CoolingCoolingCoolingOS
2x Scythe slim 120mm case fans 80mm generic 2x front case fans Windows 10 
MonitorKeyboardPowerCase
Toshiba 48" 4k TV Logitech wireless Corsair RM1000 Corsair Carbide Spec-03 
MouseMouse PadAudioOther
Logitech wireless A rectangular one 2.1 system with woofer Xbox controller 
  hide details  
Reply
Black Death
(21 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX 8350 MSI 970 Gaming Palit GTX 1080 Super Jetstream Kingston Hyper X Savage 
Hard DriveHard DriveOptical DriveCooling
Sandisk SSD Seagate Hybrid LG Blu Ray Corsair H55 Liquid CPU Cooler 
CoolingCoolingCoolingOS
2x Scythe slim 120mm case fans 80mm generic 2x front case fans Windows 10 
MonitorKeyboardPowerCase
Toshiba 48" 4k TV Logitech wireless Corsair RM1000 Corsair Carbide Spec-03 
MouseMouse PadAudioOther
Logitech wireless A rectangular one 2.1 system with woofer Xbox controller 
  hide details  
Reply
post #53773 of 67713
Quote:
Originally Posted by miklkit View Post

I have proven that watercooling isn't needed. The newer chips are much better than the old ones. And no way no how I would trust your advice. You are too opinionated.

What a lower wattage chip that produces less heat easier to overclock!? Say it ain't so Jim!? SAY IT AINT SO!!!! arrowheadsmiley.png

Don't take my advice, could care less, and yes you are indeed correct I'm a very opinionated person but I can be swayed onto the correct path with facts. Psssst you just proved my point about watercooling btw. thumb.gif
Kraken
(5 items)
 
500R Chernobyl
(11 items)
 
 
CPUMotherboardGraphicsRAM
i5 4670k Asus Maximus VII Ranger MSI GTX 970 Hyper X Savage  
Cooling
Custom Loop 
CPUMotherboardGraphicsRAM
FX8350 Asus Sabretooth 990FX R2.0 EVGA GTX970 FTW Hyper x HX324C11SRK2/16 
CoolingCoolingCoolingCooling
EK AMD LTX XSPC Nylon Dual 5.25 Reservoir Inc Laing D5  Coolgate Triple HD360 Alphacool NexXxoS XT45 Full Copper 240mm 
OSMonitorCase
Windows 7 Ultimate Samsung SyncMaster 2032BW Carbide Series® 500R White Mid-Tower Case 
  hide details  
Reply
Kraken
(5 items)
 
500R Chernobyl
(11 items)
 
 
CPUMotherboardGraphicsRAM
i5 4670k Asus Maximus VII Ranger MSI GTX 970 Hyper X Savage  
Cooling
Custom Loop 
CPUMotherboardGraphicsRAM
FX8350 Asus Sabretooth 990FX R2.0 EVGA GTX970 FTW Hyper x HX324C11SRK2/16 
CoolingCoolingCoolingCooling
EK AMD LTX XSPC Nylon Dual 5.25 Reservoir Inc Laing D5  Coolgate Triple HD360 Alphacool NexXxoS XT45 Full Copper 240mm 
OSMonitorCase
Windows 7 Ultimate Samsung SyncMaster 2032BW Carbide Series® 500R White Mid-Tower Case 
  hide details  
Reply
post #53774 of 67713
Quote:
Originally Posted by dmcl325i View Post

@mike, i dropped down to 16gb ram (2x8) from 32gb to see if that would help. Hasnt seemed to make a damn bit of difference though. Im using kingston hyperx savage 2400 at the minute, running it at 2133mhz as theres no 2400mhz option in my bios... Maybe need to up cpu nb and ht link speeds as they are 2200 and 2400 respectively. I did briefly try to up cpu nb and ht link but wouldnt even load bios so i had to pull cmos battery.

I also cant seem to make any changes to cpu fsb frequency. I did try to lower the multiplier and up the cpu fsb as that increases nb and ht link but once i reboot the changes are gone and the multiplier i set remains.

@chopper, i am still running 4.7ghz
you don't need to mess with ht link...you've been told this several times..you are trying to mix fsb with multipler overclocking without seeing what you can do with multiplier first...changing more than one setting for the same thing at a time you are defeating the purpose...you keep randomly trying things instead of trying what we suggest...one thing at a time...honestly at this point we really need screen shots of your bios because there's no telling what could be off at this point...randomly changing values and changing more than one value at a time you will never find out what worked and what didn't and one setting could be higher than what you need...if the changes don't stay chances are it reset then because they were bad caked either for the ram cpu nb or any combination
NEWBIE
(23 items)
 
  
CPUMotherboardGraphicsGraphics
AMD 8320e Asus Sabertooth R2.0 xfx r9 290 xfx r9 290 
RAMHard DriveHard DriveHard Drive
G.Skill rip jaws  Samsung 840 Pro WD BLUE 64MB Cache Ocz vertex 3 
CoolingCoolingCoolingCooling
Swiftech h220x  alphacool nexxos st30 280mm radiator alphacool coolplex pro LT10 100mm reservoir Swiftech h220 rad only 
OSMonitorMonitorKeyboard
Windows 7 64 Bit ENTERPRISE edition Acer 23" 1080p  asus 19" Dell Media Center  
PowerCaseMouseMouse Pad
Rosewill Photon 1200W Phanteks Enthoo Pro Logitech G5 or Steel Series MW2 edition Generic Cheapy 
AudioAudioAudio
GEMINI HSR-1000 Logitech 5.1 surround ZALMAN clip on mic 
  hide details  
Reply
NEWBIE
(23 items)
 
  
CPUMotherboardGraphicsGraphics
AMD 8320e Asus Sabertooth R2.0 xfx r9 290 xfx r9 290 
RAMHard DriveHard DriveHard Drive
G.Skill rip jaws  Samsung 840 Pro WD BLUE 64MB Cache Ocz vertex 3 
CoolingCoolingCoolingCooling
Swiftech h220x  alphacool nexxos st30 280mm radiator alphacool coolplex pro LT10 100mm reservoir Swiftech h220 rad only 
OSMonitorMonitorKeyboard
Windows 7 64 Bit ENTERPRISE edition Acer 23" 1080p  asus 19" Dell Media Center  
PowerCaseMouseMouse Pad
Rosewill Photon 1200W Phanteks Enthoo Pro Logitech G5 or Steel Series MW2 edition Generic Cheapy 
AudioAudioAudio
GEMINI HSR-1000 Logitech 5.1 surround ZALMAN clip on mic 
  hide details  
Reply
post #53775 of 67713
Quote:
Originally Posted by mfknjadagr8 View Post

Quote:
Originally Posted by dmcl325i View Post

@mike, i dropped down to 16gb ram (2x8) from 32gb to see if that would help. Hasnt seemed to make a damn bit of difference though. Im using kingston hyperx savage 2400 at the minute, running it at 2133mhz as theres no 2400mhz option in my bios... Maybe need to up cpu nb and ht link speeds as they are 2200 and 2400 respectively. I did briefly try to up cpu nb and ht link but wouldnt even load bios so i had to pull cmos battery.

I also cant seem to make any changes to cpu fsb frequency. I did try to lower the multiplier and up the cpu fsb as that increases nb and ht link but once i reboot the changes are gone and the multiplier i set remains.

@chopper, i am still running 4.7ghz
you don't need to mess with ht link...you've been told this several times..you are trying to mix fsb with multipler overclocking without seeing what you can do with multiplier first...changing more than one setting for the same thing at a time you are defeating the purpose...you keep randomly trying things instead of trying what we suggest...one thing at a time...honestly at this point we really need screen shots of your bios because there's no telling what could be off at this point...randomly changing values and changing more than one value at a time you will never find out what worked and what didn't and one setting could be higher than what you need...

This.....

Tips for Over clocking..

1 Find max Multi OC
2 Find max FSB OC
3 Find Max Ram OC

Find max FSB + Multi OC based around the voltages that you need
Find closest Ram frequency that is still stable with FSB and Multi

Tighten timings. Check to see if voltages can be lowered..

make sure you test for stability during and after all steps are done


Boom you have a very good OC
Wet Billy
(15 items)
 
PHENOM Phoenix
(13 items)
 
 
CPUMotherboardGraphicsRAM
AMD FX 8350 @ 5.06GHz AsUS Sabertooth R2.0 xfx 280x DD Crucial Ballistex Tactical Tracer 1866Mhz 
Hard DriveOptical DriveCoolingCooling
Samsung 830 SSD 128GB LG BD-ROM/DVD Rewriter XSPC Raystorm RS240 kit A LOT OF FANS 
OSMonitorKeyboardPower
WIN 7 ultamate AOC 23" LED LCD Microsoft wireless laser 6000 Rosewill Capstone 750w 
CaseMouseMouse Pad
Coolermaster HAF 912 Microsoft wireless laser 6000 none 
CPUMotherboardGraphicsGraphics
phenom II x6 1100T MSI 990FXA-GD65 GTX 460 GTX 460 
RAMHard DriveOptical DriveCooling
Crucial Ballistix Tactical Tracer 8GB (2 x 4GB)... Samsung SSD 830  LG Blueray Coolermaster N520 
OSMonitorKeyboardPower
Win 7 Ultimate x64 AOC 1080p LED Microsoft OCZ 850w 
Case
Coolermaster HAF 912 
  hide details  
Reply
Wet Billy
(15 items)
 
PHENOM Phoenix
(13 items)
 
 
CPUMotherboardGraphicsRAM
AMD FX 8350 @ 5.06GHz AsUS Sabertooth R2.0 xfx 280x DD Crucial Ballistex Tactical Tracer 1866Mhz 
Hard DriveOptical DriveCoolingCooling
Samsung 830 SSD 128GB LG BD-ROM/DVD Rewriter XSPC Raystorm RS240 kit A LOT OF FANS 
OSMonitorKeyboardPower
WIN 7 ultamate AOC 23" LED LCD Microsoft wireless laser 6000 Rosewill Capstone 750w 
CaseMouseMouse Pad
Coolermaster HAF 912 Microsoft wireless laser 6000 none 
CPUMotherboardGraphicsGraphics
phenom II x6 1100T MSI 990FXA-GD65 GTX 460 GTX 460 
RAMHard DriveOptical DriveCooling
Crucial Ballistix Tactical Tracer 8GB (2 x 4GB)... Samsung SSD 830  LG Blueray Coolermaster N520 
OSMonitorKeyboardPower
Win 7 Ultimate x64 AOC 1080p LED Microsoft OCZ 850w 
Case
Coolermaster HAF 912 
  hide details  
Reply
post #53776 of 67713
Quote:
Originally Posted by dmcl325i View Post

Ok will bear that in mind..

I think i figured out why i couldnt raise cpu nb frequency or ht link. I have only been adjusting cpu nb voltage, vcore and dram. Nb and sb voltage has been left on auto since the beginning. I just bumped nb voltage and its taken a 200mhz increase on cpu nb and ht link. Im running a few passes on very hard in IBT and (touch wood) its on the 4th pass with no problems yet.

On a side note the freeze test animation does not seem as choppy having raised nb and ht link speeds by 200mhz.

Ok so here is what you should do to make it easier for yourself.
  • Overclock the CPU on its own first using multiplier not FSB
  • Once you have discovered how much vcore your cpu needs to keep your desired speed stable write it down.
  • Now move onto overclocking RAM, HT and NB, keep a record of the voltages required and keep remembering that too much voltage is also a bad thing.
Kraken
(5 items)
 
500R Chernobyl
(11 items)
 
 
CPUMotherboardGraphicsRAM
i5 4670k Asus Maximus VII Ranger MSI GTX 970 Hyper X Savage  
Cooling
Custom Loop 
CPUMotherboardGraphicsRAM
FX8350 Asus Sabretooth 990FX R2.0 EVGA GTX970 FTW Hyper x HX324C11SRK2/16 
CoolingCoolingCoolingCooling
EK AMD LTX XSPC Nylon Dual 5.25 Reservoir Inc Laing D5  Coolgate Triple HD360 Alphacool NexXxoS XT45 Full Copper 240mm 
OSMonitorCase
Windows 7 Ultimate Samsung SyncMaster 2032BW Carbide Series® 500R White Mid-Tower Case 
  hide details  
Reply
Kraken
(5 items)
 
500R Chernobyl
(11 items)
 
 
CPUMotherboardGraphicsRAM
i5 4670k Asus Maximus VII Ranger MSI GTX 970 Hyper X Savage  
Cooling
Custom Loop 
CPUMotherboardGraphicsRAM
FX8350 Asus Sabretooth 990FX R2.0 EVGA GTX970 FTW Hyper x HX324C11SRK2/16 
CoolingCoolingCoolingCooling
EK AMD LTX XSPC Nylon Dual 5.25 Reservoir Inc Laing D5  Coolgate Triple HD360 Alphacool NexXxoS XT45 Full Copper 240mm 
OSMonitorCase
Windows 7 Ultimate Samsung SyncMaster 2032BW Carbide Series® 500R White Mid-Tower Case 
  hide details  
Reply
post #53777 of 67713
Quote:
Originally Posted by Benjiw View Post

Ok so here is what you should do to make it easier for yourself.
  • Overclock the CPU on its own first using multiplier not FSB
  • Once you have discovered how much vcore your cpu needs to keep your desired speed stable write it down.
  • Now move onto overclocking RAM, HT and NB, keep a record of the voltages required and keep remembering that too much voltage is also a bad thing.

This...this is how I learnt...and thanks to all here for putting me thru it.

Oh and at each overclock run a stress test.

And don't set your sights to high...

And feel free to try a validation run at some exotic overclock..I did...didn't teach me anything but I managed to get it to boot and validate at a clock that was not suitable for my rig...whoooooo! But don't blame me if you break something....I went thru 4 power supplies running prime etc.
Mike the Owl
(12 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX8350 SABERTOOTH 990FX R2.0 MSI Radeon R9 270X Gaming Kingston HyperX 
Hard DriveCoolingOSMonitor
OCZ Vertex Plus R2 Corsair H80i Windows 8.1 Samsung 24 inch 
KeyboardPowerCaseMouse
PARTHICA Gaming Keyboard Powercool X-Viper 750W Power Supply 80 Plus Bronze Coolermaster Haf 922 CM Storm 
  hide details  
Reply
Mike the Owl
(12 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX8350 SABERTOOTH 990FX R2.0 MSI Radeon R9 270X Gaming Kingston HyperX 
Hard DriveCoolingOSMonitor
OCZ Vertex Plus R2 Corsair H80i Windows 8.1 Samsung 24 inch 
KeyboardPowerCaseMouse
PARTHICA Gaming Keyboard Powercool X-Viper 750W Power Supply 80 Plus Bronze Coolermaster Haf 922 CM Storm 
  hide details  
Reply
post #53778 of 67713
Quote:
Originally Posted by F3ERS 2 ASH3S View Post

This.....

Tips for Over clocking..

1 Find max Multi OC
2 Find max FSB OC
3 Find Max Ram OC

Find max FSB + Multi OC based around the voltages that you need
Find closest Ram frequency that is still stable with FSB and Multi

Tighten timings. Check to see if voltages can be lowered..

make sure you test for stability during and after all steps are done


Boom you have a very good OC

Do you guys think one can test FSB stability by just upping it while keeping everything else lowish? Like stress test your cpu on a 4.0 clock with default cpu-nb and ht and try the highest fsb to keep close to those numbers?
    
CPUMotherboardGraphicsRAM
6700k viii hero Sapphire r9 290 tri-x OC g.skill 3000 16gb 
Hard DriveHard DriveOptical DriveCooling
WD Caviar Black Sata-3 64MB 840 evo DVD R/W Combo Alphacool 360 ut60 
CoolingCoolingCoolingCooling
EK-FC R9-290X - Acetal+Nickel (Rev.2.0) EK-FC R9-290X Backplate - Black EK-FC R9-290X Reinforcer - Black Fittings and adapters 
CoolingCoolingCoolingCooling
Ek supremacy EVO ek 420 radiator ek revo d5 Bitspower acrylic tubing 
OSMonitorKeyboardPower
Windows 10 pro BenQ XL2730Z Ducky One DKON1508S Corsair HX850i 
CaseMouseMouse PadAudio
Phanteks Enthoo Primo Mionix Castor Razer Goliathus Edifier C3X 
AudioOther
Asus xonar dx Xbox one gamepad 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
6700k viii hero Sapphire r9 290 tri-x OC g.skill 3000 16gb 
Hard DriveHard DriveOptical DriveCooling
WD Caviar Black Sata-3 64MB 840 evo DVD R/W Combo Alphacool 360 ut60 
CoolingCoolingCoolingCooling
EK-FC R9-290X - Acetal+Nickel (Rev.2.0) EK-FC R9-290X Backplate - Black EK-FC R9-290X Reinforcer - Black Fittings and adapters 
CoolingCoolingCoolingCooling
Ek supremacy EVO ek 420 radiator ek revo d5 Bitspower acrylic tubing 
OSMonitorKeyboardPower
Windows 10 pro BenQ XL2730Z Ducky One DKON1508S Corsair HX850i 
CaseMouseMouse PadAudio
Phanteks Enthoo Primo Mionix Castor Razer Goliathus Edifier C3X 
AudioOther
Asus xonar dx Xbox one gamepad 
  hide details  
Reply
post #53779 of 67713
Quote:
Originally Posted by Kalistoval View Post

Damn off topic, anyone know if its possible to recover data in my case a birthday video I accidentally deleted off my ssd about a week ago. With trim enabled I think its going to be impossible by now I'm using easeus atm and don't mind trying different software.

RECUVA.
post #53780 of 67713
Quote:
Originally Posted by Chopper1591 View Post

Quote:
Originally Posted by F3ERS 2 ASH3S View Post

This.....

Tips for Over clocking..

1 Find max Multi OC
2 Find max FSB OC
3 Find Max Ram OC

Find max FSB + Multi OC based around the voltages that you need
Find closest Ram frequency that is still stable with FSB and Multi

Tighten timings. Check to see if voltages can be lowered..

make sure you test for stability during and after all steps are done


Boom you have a very good OC

Do you guys think one can test FSB stability by just upping it while keeping everything else lowish? Like stress test your cpu on a 4.0 clock with default cpu-nb and ht and try the highest fsb to keep close to those numbers?

YUPPERS,

keep in mind that it OCs the NB and SB and PCI links.. the bus really is what ties it all together. only tricky thing about it is that there are a few voltages that you have to keep in check and watch for.
Wet Billy
(15 items)
 
PHENOM Phoenix
(13 items)
 
 
CPUMotherboardGraphicsRAM
AMD FX 8350 @ 5.06GHz AsUS Sabertooth R2.0 xfx 280x DD Crucial Ballistex Tactical Tracer 1866Mhz 
Hard DriveOptical DriveCoolingCooling
Samsung 830 SSD 128GB LG BD-ROM/DVD Rewriter XSPC Raystorm RS240 kit A LOT OF FANS 
OSMonitorKeyboardPower
WIN 7 ultamate AOC 23" LED LCD Microsoft wireless laser 6000 Rosewill Capstone 750w 
CaseMouseMouse Pad
Coolermaster HAF 912 Microsoft wireless laser 6000 none 
CPUMotherboardGraphicsGraphics
phenom II x6 1100T MSI 990FXA-GD65 GTX 460 GTX 460 
RAMHard DriveOptical DriveCooling
Crucial Ballistix Tactical Tracer 8GB (2 x 4GB)... Samsung SSD 830  LG Blueray Coolermaster N520 
OSMonitorKeyboardPower
Win 7 Ultimate x64 AOC 1080p LED Microsoft OCZ 850w 
Case
Coolermaster HAF 912 
  hide details  
Reply
Wet Billy
(15 items)
 
PHENOM Phoenix
(13 items)
 
 
CPUMotherboardGraphicsRAM
AMD FX 8350 @ 5.06GHz AsUS Sabertooth R2.0 xfx 280x DD Crucial Ballistex Tactical Tracer 1866Mhz 
Hard DriveOptical DriveCoolingCooling
Samsung 830 SSD 128GB LG BD-ROM/DVD Rewriter XSPC Raystorm RS240 kit A LOT OF FANS 
OSMonitorKeyboardPower
WIN 7 ultamate AOC 23" LED LCD Microsoft wireless laser 6000 Rosewill Capstone 750w 
CaseMouseMouse Pad
Coolermaster HAF 912 Microsoft wireless laser 6000 none 
CPUMotherboardGraphicsGraphics
phenom II x6 1100T MSI 990FXA-GD65 GTX 460 GTX 460 
RAMHard DriveOptical DriveCooling
Crucial Ballistix Tactical Tracer 8GB (2 x 4GB)... Samsung SSD 830  LG Blueray Coolermaster N520 
OSMonitorKeyboardPower
Win 7 Ultimate x64 AOC 1080p LED Microsoft OCZ 850w 
Case
Coolermaster HAF 912 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › [OFFICIAL] FX-8320/FX-8350 Vishera Owners Club