Overclock.net › Forums › AMD › AMD CPUs › [OFFICIAL] FX-8320/FX-8350 Vishera Owners Club
New Posts  All Forums:Forum Nav:

[OFFICIAL] FX-8320/FX-8350 Vishera Owners Club - Page 5384

post #53831 of 67694
Quote:
Originally Posted by cssorkinman View Post

Quote:
Originally Posted by F3ERS 2 ASH3S View Post

Quote:
Originally Posted by dmcl325i View Post

@Chopper1591 Ok.. Bios as it stands currently.


P-state is on (I suggest turn off and turn off APM as this will mess with you trying to get stable. same with Cool n Quiet.

Drop HT link frequency to 2400
take everything off of auto and put in the base setting

Could be over volting CPU depending on how much v-drop there is

Is there any other RAM options or power options on this board other than this screen?

Cpu smart protection , hmm that's new compared to the GD65 GD80's of old, wonder if its OCP or heat?

If there is a version of MSI's Core Center that works with this board, that will be the simplest way to tweak your ht link speed. Unlike other software overclocking utilities, it actually works quite well, one suggestion though, reset bios to defaults before using it. Don't use click bios when tuning. Find a mix that works using core center, then migrate those settings to Bios once you are done tweaking.

CPU Smart Protection
CPU Smart Protection is a mechanism of CPU overheating protection. It will
automatically reduce the clock when the CPU temperature gets too high.

^judging by the way it normally goes means socket temp

Here from the manual are all the features in BIOS
Warning: Spoiler! (Click to show)
▶Current CPU/ DRAM Frequency
These items show the current frequencies of installed CPU and Memory. Read-only.
▶▶Adjust CPU FSB Frequency
Allows you to set the CPU FSB frequency (in MHz). You may overclock the CPU
by adjusting this value. Please note that overclocking behavior and stability is not
guaranteed.
▶▶Adjust CPU Ratio [Auto]
Sets the CPU ratio that is used to determine CPU clock speed. This item can only be
changed if the processor supports this function.
▶▶Adjusted CPU Frequency
Shows the adjusted CPU frequency. Read-only.
▶▶Adjust CPU-NB Ratio [Auto]
Sets the CPU-NB ratio that is used to determine CPU-NB clock speed.
▶▶Adjusted CPU-NB Frequency
Shows the adjusted CPU frequency. Read-only.
▶▶CPU Smart Protection
CPU Smart Protection is a mechanism of CPU overheating protection. It will
automatically reduce the clock when the CPU temperature gets too high.
▶▶CPU Core Control
This item allows you to select the number of active processor cores. When set to
[Auto], the CPU will operate under the default number of cores.
Chapter 3
BIOS Setup 3-14
▶▶AMD Turbo Core Technology [Auto]
Based on AMD Turbo Core Technology, part of CPU core ratio may pop down for
providing more performance headroom for active CPU core, even AMD Cool’n’Quiet
Technology is Disabled.
[Auto] Turbo Core Technology will linked to AMD Cool’n’Quiet Technology.
[Enabled] Enables this function.
[Disabled] Disables this function.
▶▶Adjust Turbo Core Ratio [Auto]
Specifies the Turbo Core frequency multiplier.
▶▶Adjusted Turbo Core Frequency
Shows the adjusted Turbo Core frequency. Read-only.
▶▶DRAM Frequency [Auto]
Sets the DRAM frequency. Please note the overclocking behavior is not guaranteed.
▶▶Adjusted DRAM Frequency
Shows the adjusted DRAM frequency. Read-only.
▶▶Intel Extreme Memory Profile (X.M.P) [Disabled]
X.M.P. (Extreme Memory Profile) is the overclocking technology by memory module.
This item will be available when you install the memory modules that support X.M.P.
technology. When the Intel Extreme Memory Profile (XMP) is Enabled, the AMD
Memory Profile (AMP) will be forced to be disabled.
[Disabled] Disables this function.
[Enabled] Choose to apply an Intel Extreme Memory Profile (XMP) to increase
system performance.
▶▶AMD Memory Profile (AMP) [Disabled]
AMP is the overclocking technology by memory module. This item will be available
when you install the memory modules that support AMP technology. When AMP is
Enabled, the XMP will be forced to be disabled.
[Disabled] Disables this function.
[Enabled] Choose to apply an AMD Memory Profile (AMP) to increase system
performance.
▶▶DRAM Timing Mode [Auto]
Selects the memory timing mode.
[Auto] DRAM timings will be determined based on SPD (Serial Presence
Detect) of installed memory modules.
[Link] Allows user to configure the DRAM timing manually for all memory
channel.
[UnLink] Allows user to configure the DRAM timing manually for respective
memory channel.
▶▶Advanced DRAM Configuration
Press to enter the sub-menu. This sub-menu will be activated after setting
[Link] or [Unlink] in “DRAM Timing Mode”. User can set the memory timing for each
memory channel. The system may become unstable or unbootable after changing
memory timing. If it occurs, please clear the CMOS data and restore the default
settings. (Refer to the Clear CMOS jumper/ button section to clear the CMOS data,
and enter the BIOS to load the default settings.
Chapter 3
3-15 BIOS Setup
▶▶HT Link Speed
This item allows you to set the Hyper-Transport Link speed. Setting to [Auto], the
system will detect the HT link speed automatically.
▶▶Adjusted HT Link Frequency
It shows the adjusted HT Link frequency. Read-only.
▶▶HT Link Control
Press to enter the sub-menu.
▶▶HT Incoming/ Outgoing Link Width
These items allow you to set the Hyper-Transport Link width. Setting to [Auto], the
system will detect the HT link width automatically.
▶▶Adjust PCI-E Frequency (MHz)
Sets the PCI Express frequency.
▶▶XXX Voltage [Auto] (optional)
Sets these voltages. If set to "Auto", BIOS will set these voltages automatically or you
can set it manually.
▶▶Spread Spectrum [Disabled]
This function reduces the EMI (Electromagnetic Interference) generated by modulating
clock generator pulses.
[Enabled] Enables the spread spectrum function to reduce the EMI
(Electromagnetic Interference) problem.
[Disabled] Enhances the overclocking ability of CPU Base clock.
Important
• If you do not have any EMI problem, leave the setting at [Disabled] for optimal
system stability and performance. But if you are plagued by EMI, select the value of
Spread Spectrum for EMI reduction.
• The greater the Spread Spectrum value is, the greater the EMI is reduced, and
the system will become less stable. For the most suitable Spread Spectrum value,
please consult your local EMI regulation.
• Remember to disable Spread Spectrum if you are overclocking because even a
slight jitter can introduce a temporary boost in clock speed which may just cause
your overclocked processor to lock up.
▶▶CPU Specifications
Press to enter the sub-menu. This sub-menu displays the information of
installed CPU. You can also access this information menu at any time by pressing
[F4]. Read only.
▶▶CPU Technology Support
Press to enter the sub-menu. The sub-menu shows what the key features
does the installed CPU support. Read only.
▶▶MEMORY-Z
Press to enter the sub-menu. This sub-menu displays all the settings and
timings of installed memory.
▶▶CPU Features
Press to enter the sub-menu.
Chapter 3
BIOS Setup 3-16
▶▶AMD Cool’n’Quiet [Auto]
Enabled or disabled AMD Cool’n’Quiet function.
[Auto] Depends on AMD Design.
[Enable] Enables AMD Cool’n’Quiet function. The Cool’n’Quiet technology
can effectively and dynamically lower CPU speed and power
consumption.
[Disabled] Disables this function.
Important
When adjusting CPU Ratio, the Cool’n’Quiet function will be disabled automatically.
For CPU which supports the Turbo Core Tech., please set AMD Turbo Core
Technology and AMD Cool’n’Quiet as Disabled to retain the default CPU core speed.
▶▶C1E Support
Enables this item to reduce the CPU power consumption while idle. Not all
processors support Enhanced Halt state (C1E).
▶▶SVM Mode [Enabled]
Enables or disables CPU Virtualization.
[Enabled] Enables CPU Virtualization and allows a platform to run multiple
operating systems in independent partitions. The system can
function as multiple systems virtually.
[Disabled] Disables this function.
▶▶IOMMU Mode
Enables/disables the IOMMU (I/O Memory Management Unit) for I/O Virtualization.

Edited by F3ERS 2 ASH3S - 10/13/15 at 5:22am
Wet Billy
(15 items)
 
PHENOM Phoenix
(13 items)
 
 
CPUMotherboardGraphicsRAM
AMD FX 8350 @ 5.06GHz AsUS Sabertooth R2.0 xfx 280x DD Crucial Ballistex Tactical Tracer 1866Mhz 
Hard DriveOptical DriveCoolingCooling
Samsung 830 SSD 128GB LG BD-ROM/DVD Rewriter XSPC Raystorm RS240 kit A LOT OF FANS 
OSMonitorKeyboardPower
WIN 7 ultamate AOC 23" LED LCD Microsoft wireless laser 6000 Rosewill Capstone 750w 
CaseMouseMouse Pad
Coolermaster HAF 912 Microsoft wireless laser 6000 none 
CPUMotherboardGraphicsGraphics
phenom II x6 1100T MSI 990FXA-GD65 GTX 460 GTX 460 
RAMHard DriveOptical DriveCooling
Crucial Ballistix Tactical Tracer 8GB (2 x 4GB)... Samsung SSD 830  LG Blueray Coolermaster N520 
OSMonitorKeyboardPower
Win 7 Ultimate x64 AOC 1080p LED Microsoft OCZ 850w 
Case
Coolermaster HAF 912 
  hide details  
Reply
Wet Billy
(15 items)
 
PHENOM Phoenix
(13 items)
 
 
CPUMotherboardGraphicsRAM
AMD FX 8350 @ 5.06GHz AsUS Sabertooth R2.0 xfx 280x DD Crucial Ballistex Tactical Tracer 1866Mhz 
Hard DriveOptical DriveCoolingCooling
Samsung 830 SSD 128GB LG BD-ROM/DVD Rewriter XSPC Raystorm RS240 kit A LOT OF FANS 
OSMonitorKeyboardPower
WIN 7 ultamate AOC 23" LED LCD Microsoft wireless laser 6000 Rosewill Capstone 750w 
CaseMouseMouse Pad
Coolermaster HAF 912 Microsoft wireless laser 6000 none 
CPUMotherboardGraphicsGraphics
phenom II x6 1100T MSI 990FXA-GD65 GTX 460 GTX 460 
RAMHard DriveOptical DriveCooling
Crucial Ballistix Tactical Tracer 8GB (2 x 4GB)... Samsung SSD 830  LG Blueray Coolermaster N520 
OSMonitorKeyboardPower
Win 7 Ultimate x64 AOC 1080p LED Microsoft OCZ 850w 
Case
Coolermaster HAF 912 
  hide details  
Reply
post #53832 of 67694
Quote:
Originally Posted by F3ERS 2 ASH3S View Post

Quote:
Originally Posted by cssorkinman View Post

Quote:
Originally Posted by F3ERS 2 ASH3S View Post

Quote:
Originally Posted by dmcl325i View Post

@Chopper1591 Ok.. Bios as it stands currently.


P-state is on (I suggest turn off and turn off APM as this will mess with you trying to get stable. same with Cool n Quiet.

Drop HT link frequency to 2400
take everything off of auto and put in the base setting

Could be over volting CPU depending on how much v-drop there is

Is there any other RAM options or power options on this board other than this screen?

Cpu smart protection , hmm that's new compared to the GD65 GD80's of old, wonder if its OCP or heat?

If there is a version of MSI's Core Center that works with this board, that will be the simplest way to tweak your ht link speed. Unlike other software overclocking utilities, it actually works quite well, one suggestion though, reset bios to defaults before using it. Don't use click bios when tuning. Find a mix that works using core center, then migrate those settings to Bios once you are done tweaking.

CPU Smart Protection
CPU Smart Protection is a mechanism of CPU overheating protection. It will
automatically reduce the clock when the CPU temperature gets too high.

Here from the manual are all the features in BIOS
Warning: Spoiler! (Click to show)
▶Current CPU/ DRAM Frequency
These items show the current frequencies of installed CPU and Memory. Read-only.
▶▶Adjust CPU FSB Frequency
Allows you to set the CPU FSB frequency (in MHz). You may overclock the CPU
by adjusting this value. Please note that overclocking behavior and stability is not
guaranteed.
▶▶Adjust CPU Ratio [Auto]
Sets the CPU ratio that is used to determine CPU clock speed. This item can only be
changed if the processor supports this function.
▶▶Adjusted CPU Frequency
Shows the adjusted CPU frequency. Read-only.
▶▶Adjust CPU-NB Ratio [Auto]
Sets the CPU-NB ratio that is used to determine CPU-NB clock speed.
▶▶Adjusted CPU-NB Frequency
Shows the adjusted CPU frequency. Read-only.
▶▶CPU Smart Protection
CPU Smart Protection is a mechanism of CPU overheating protection. It will
automatically reduce the clock when the CPU temperature gets too high.
▶▶CPU Core Control
This item allows you to select the number of active processor cores. When set to
[Auto], the CPU will operate under the default number of cores.
Chapter 3
BIOS Setup 3-14
▶▶AMD Turbo Core Technology [Auto]
Based on AMD Turbo Core Technology, part of CPU core ratio may pop down for
providing more performance headroom for active CPU core, even AMD Cool’n’Quiet
Technology is Disabled.
[Auto] Turbo Core Technology will linked to AMD Cool’n’Quiet Technology.
[Enabled] Enables this function.
[Disabled] Disables this function.
▶▶Adjust Turbo Core Ratio [Auto]
Specifies the Turbo Core frequency multiplier.
▶▶Adjusted Turbo Core Frequency
Shows the adjusted Turbo Core frequency. Read-only.
▶▶DRAM Frequency [Auto]
Sets the DRAM frequency. Please note the overclocking behavior is not guaranteed.
▶▶Adjusted DRAM Frequency
Shows the adjusted DRAM frequency. Read-only.
▶▶Intel Extreme Memory Profile (X.M.P) [Disabled]
X.M.P. (Extreme Memory Profile) is the overclocking technology by memory module.
This item will be available when you install the memory modules that support X.M.P.
technology. When the Intel Extreme Memory Profile (XMP) is Enabled, the AMD
Memory Profile (AMP) will be forced to be disabled.
[Disabled] Disables this function.
[Enabled] Choose to apply an Intel Extreme Memory Profile (XMP) to increase
system performance.
▶▶AMD Memory Profile (AMP) [Disabled]
AMP is the overclocking technology by memory module. This item will be available
when you install the memory modules that support AMP technology. When AMP is
Enabled, the XMP will be forced to be disabled.
[Disabled] Disables this function.
[Enabled] Choose to apply an AMD Memory Profile (AMP) to increase system
performance.
▶▶DRAM Timing Mode [Auto]
Selects the memory timing mode.
[Auto] DRAM timings will be determined based on SPD (Serial Presence
Detect) of installed memory modules.
[Link] Allows user to configure the DRAM timing manually for all memory
channel.
[UnLink] Allows user to configure the DRAM timing manually for respective
memory channel.
▶▶Advanced DRAM Configuration
Press to enter the sub-menu. This sub-menu will be activated after setting
[Link] or [Unlink] in “DRAM Timing Mode”. User can set the memory timing for each
memory channel. The system may become unstable or unbootable after changing
memory timing. If it occurs, please clear the CMOS data and restore the default
settings. (Refer to the Clear CMOS jumper/ button section to clear the CMOS data,
and enter the BIOS to load the default settings.
Chapter 3
3-15 BIOS Setup
▶▶HT Link Speed
This item allows you to set the Hyper-Transport Link speed. Setting to [Auto], the
system will detect the HT link speed automatically.
▶▶Adjusted HT Link Frequency
It shows the adjusted HT Link frequency. Read-only.
▶▶HT Link Control
Press to enter the sub-menu.
▶▶HT Incoming/ Outgoing Link Width
These items allow you to set the Hyper-Transport Link width. Setting to [Auto], the
system will detect the HT link width automatically.
▶▶Adjust PCI-E Frequency (MHz)
Sets the PCI Express frequency.
▶▶XXX Voltage [Auto] (optional)
Sets these voltages. If set to "Auto", BIOS will set these voltages automatically or you
can set it manually.
▶▶Spread Spectrum [Disabled]
This function reduces the EMI (Electromagnetic Interference) generated by modulating
clock generator pulses.
[Enabled] Enables the spread spectrum function to reduce the EMI
(Electromagnetic Interference) problem.
[Disabled] Enhances the overclocking ability of CPU Base clock.
Important
• If you do not have any EMI problem, leave the setting at [Disabled] for optimal
system stability and performance. But if you are plagued by EMI, select the value of
Spread Spectrum for EMI reduction.
• The greater the Spread Spectrum value is, the greater the EMI is reduced, and
the system will become less stable. For the most suitable Spread Spectrum value,
please consult your local EMI regulation.
• Remember to disable Spread Spectrum if you are overclocking because even a
slight jitter can introduce a temporary boost in clock speed which may just cause
your overclocked processor to lock up.
▶▶CPU Specifications
Press to enter the sub-menu. This sub-menu displays the information of
installed CPU. You can also access this information menu at any time by pressing
[F4]. Read only.
▶▶CPU Technology Support
Press to enter the sub-menu. The sub-menu shows what the key features
does the installed CPU support. Read only.
▶▶MEMORY-Z
Press to enter the sub-menu. This sub-menu displays all the settings and
timings of installed memory.
▶▶CPU Features
Press to enter the sub-menu.
Chapter 3
BIOS Setup 3-16
▶▶AMD Cool’n’Quiet [Auto]
Enabled or disabled AMD Cool’n’Quiet function.
[Auto] Depends on AMD Design.
[Enable] Enables AMD Cool’n’Quiet function. The Cool’n’Quiet technology
can effectively and dynamically lower CPU speed and power
consumption.
[Disabled] Disables this function.
Important
When adjusting CPU Ratio, the Cool’n’Quiet function will be disabled automatically.
For CPU which supports the Turbo Core Tech., please set AMD Turbo Core
Technology and AMD Cool’n’Quiet as Disabled to retain the default CPU core speed.
▶▶C1E Support
Enables this item to reduce the CPU power consumption while idle. Not all
processors support Enhanced Halt state (C1E).
▶▶SVM Mode [Enabled]
Enables or disables CPU Virtualization.
[Enabled] Enables CPU Virtualization and allows a platform to run multiple
operating systems in independent partitions. The system can
function as multiple systems virtually.
[Disabled] Disables this function.
▶▶IOMMU Mode
Enables/disables the IOMMU (I/O Memory Management Unit) for I/O Virtualization.
[/
Ahh, that would explain his clock speed fluctuations. My older MSI 990's would sooner melt into a puddle than throttle when power saving features etc. were disabled. As long as you are vigilant , you won't have problems, but if you make the assumption that it will protect itself....well then you are going to get a dose of " oh damn".
Ryzen Shine!
(14 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 1800X @ 4125mhz 1.432 Volts MSI X370 Titanium   Fury  G.SKILL TridentZ Series 32GB (4 x 8GB) 288-Pin... 
Hard DriveOptical DriveCoolingOS
Samsung 850 pro Hp 1260 I liquid unobtanium Koolance 480mm radiator, 39... Win 7 HP/Winspy 10 64bit 
MonitorKeyboardPowerCase
24" hp @ 1900x1200 Logitech G19 PC power and cooling 910 watt silencer Thermaltake P5 
MouseMouse Pad
Logitech MX 518 fUnc industries 
  hide details  
Reply
Ryzen Shine!
(14 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 1800X @ 4125mhz 1.432 Volts MSI X370 Titanium   Fury  G.SKILL TridentZ Series 32GB (4 x 8GB) 288-Pin... 
Hard DriveOptical DriveCoolingOS
Samsung 850 pro Hp 1260 I liquid unobtanium Koolance 480mm radiator, 39... Win 7 HP/Winspy 10 64bit 
MonitorKeyboardPowerCase
24" hp @ 1900x1200 Logitech G19 PC power and cooling 910 watt silencer Thermaltake P5 
MouseMouse Pad
Logitech MX 518 fUnc industries 
  hide details  
Reply
post #53833 of 67694
Quote:
Originally Posted by cssorkinman View Post

Quote:
Originally Posted by F3ERS 2 ASH3S View Post

Quote:
Originally Posted by cssorkinman View Post

Quote:
Originally Posted by F3ERS 2 ASH3S View Post

Quote:
Originally Posted by dmcl325i View Post

@Chopper1591 Ok.. Bios as it stands currently.


P-state is on (I suggest turn off and turn off APM as this will mess with you trying to get stable. same with Cool n Quiet.

Drop HT link frequency to 2400
take everything off of auto and put in the base setting

Could be over volting CPU depending on how much v-drop there is

Is there any other RAM options or power options on this board other than this screen?

Cpu smart protection , hmm that's new compared to the GD65 GD80's of old, wonder if its OCP or heat?

If there is a version of MSI's Core Center that works with this board, that will be the simplest way to tweak your ht link speed. Unlike other software overclocking utilities, it actually works quite well, one suggestion though, reset bios to defaults before using it. Don't use click bios when tuning. Find a mix that works using core center, then migrate those settings to Bios once you are done tweaking.

CPU Smart Protection
CPU Smart Protection is a mechanism of CPU overheating protection. It will
automatically reduce the clock when the CPU temperature gets too high.

Here from the manual are all the features in BIOS
Warning: Spoiler! (Click to show)
▶Current CPU/ DRAM Frequency
These items show the current frequencies of installed CPU and Memory. Read-only.
▶▶Adjust CPU FSB Frequency
Allows you to set the CPU FSB frequency (in MHz). You may overclock the CPU
by adjusting this value. Please note that overclocking behavior and stability is not
guaranteed.
▶▶Adjust CPU Ratio [Auto]
Sets the CPU ratio that is used to determine CPU clock speed. This item can only be
changed if the processor supports this function.
▶▶Adjusted CPU Frequency
Shows the adjusted CPU frequency. Read-only.
▶▶Adjust CPU-NB Ratio [Auto]
Sets the CPU-NB ratio that is used to determine CPU-NB clock speed.
▶▶Adjusted CPU-NB Frequency
Shows the adjusted CPU frequency. Read-only.
▶▶CPU Smart Protection
CPU Smart Protection is a mechanism of CPU overheating protection. It will
automatically reduce the clock when the CPU temperature gets too high.
▶▶CPU Core Control
This item allows you to select the number of active processor cores. When set to
[Auto], the CPU will operate under the default number of cores.
Chapter 3
BIOS Setup 3-14
▶▶AMD Turbo Core Technology [Auto]
Based on AMD Turbo Core Technology, part of CPU core ratio may pop down for
providing more performance headroom for active CPU core, even AMD Cool’n’Quiet
Technology is Disabled.
[Auto] Turbo Core Technology will linked to AMD Cool’n’Quiet Technology.
[Enabled] Enables this function.
[Disabled] Disables this function.
▶▶Adjust Turbo Core Ratio [Auto]
Specifies the Turbo Core frequency multiplier.
▶▶Adjusted Turbo Core Frequency
Shows the adjusted Turbo Core frequency. Read-only.
▶▶DRAM Frequency [Auto]
Sets the DRAM frequency. Please note the overclocking behavior is not guaranteed.
▶▶Adjusted DRAM Frequency
Shows the adjusted DRAM frequency. Read-only.
▶▶Intel Extreme Memory Profile (X.M.P) [Disabled]
X.M.P. (Extreme Memory Profile) is the overclocking technology by memory module.
This item will be available when you install the memory modules that support X.M.P.
technology. When the Intel Extreme Memory Profile (XMP) is Enabled, the AMD
Memory Profile (AMP) will be forced to be disabled.
[Disabled] Disables this function.
[Enabled] Choose to apply an Intel Extreme Memory Profile (XMP) to increase
system performance.
▶▶AMD Memory Profile (AMP) [Disabled]
AMP is the overclocking technology by memory module. This item will be available
when you install the memory modules that support AMP technology. When AMP is
Enabled, the XMP will be forced to be disabled.
[Disabled] Disables this function.
[Enabled] Choose to apply an AMD Memory Profile (AMP) to increase system
performance.
▶▶DRAM Timing Mode [Auto]
Selects the memory timing mode.
[Auto] DRAM timings will be determined based on SPD (Serial Presence
Detect) of installed memory modules.
[Link] Allows user to configure the DRAM timing manually for all memory
channel.
[UnLink] Allows user to configure the DRAM timing manually for respective
memory channel.
▶▶Advanced DRAM Configuration
Press to enter the sub-menu. This sub-menu will be activated after setting
[Link] or [Unlink] in “DRAM Timing Mode”. User can set the memory timing for each
memory channel. The system may become unstable or unbootable after changing
memory timing. If it occurs, please clear the CMOS data and restore the default
settings. (Refer to the Clear CMOS jumper/ button section to clear the CMOS data,
and enter the BIOS to load the default settings.
Chapter 3
3-15 BIOS Setup
▶▶HT Link Speed
This item allows you to set the Hyper-Transport Link speed. Setting to [Auto], the
system will detect the HT link speed automatically.
▶▶Adjusted HT Link Frequency
It shows the adjusted HT Link frequency. Read-only.
▶▶HT Link Control
Press to enter the sub-menu.
▶▶HT Incoming/ Outgoing Link Width
These items allow you to set the Hyper-Transport Link width. Setting to [Auto], the
system will detect the HT link width automatically.
▶▶Adjust PCI-E Frequency (MHz)
Sets the PCI Express frequency.
▶▶XXX Voltage [Auto] (optional)
Sets these voltages. If set to "Auto", BIOS will set these voltages automatically or you
can set it manually.
▶▶Spread Spectrum [Disabled]
This function reduces the EMI (Electromagnetic Interference) generated by modulating
clock generator pulses.
[Enabled] Enables the spread spectrum function to reduce the EMI
(Electromagnetic Interference) problem.
[Disabled] Enhances the overclocking ability of CPU Base clock.
Important
• If you do not have any EMI problem, leave the setting at [Disabled] for optimal
system stability and performance. But if you are plagued by EMI, select the value of
Spread Spectrum for EMI reduction.
• The greater the Spread Spectrum value is, the greater the EMI is reduced, and
the system will become less stable. For the most suitable Spread Spectrum value,
please consult your local EMI regulation.
• Remember to disable Spread Spectrum if you are overclocking because even a
slight jitter can introduce a temporary boost in clock speed which may just cause
your overclocked processor to lock up.
▶▶CPU Specifications
Press to enter the sub-menu. This sub-menu displays the information of
installed CPU. You can also access this information menu at any time by pressing
[F4]. Read only.
▶▶CPU Technology Support
Press to enter the sub-menu. The sub-menu shows what the key features
does the installed CPU support. Read only.
▶▶MEMORY-Z
Press to enter the sub-menu. This sub-menu displays all the settings and
timings of installed memory.
▶▶CPU Features
Press to enter the sub-menu.
Chapter 3
BIOS Setup 3-16
▶▶AMD Cool’n’Quiet [Auto]
Enabled or disabled AMD Cool’n’Quiet function.
[Auto] Depends on AMD Design.
[Enable] Enables AMD Cool’n’Quiet function. The Cool’n’Quiet technology
can effectively and dynamically lower CPU speed and power
consumption.
[Disabled] Disables this function.
Important
When adjusting CPU Ratio, the Cool’n’Quiet function will be disabled automatically.
For CPU which supports the Turbo Core Tech., please set AMD Turbo Core
Technology and AMD Cool’n’Quiet as Disabled to retain the default CPU core speed.
▶▶C1E Support
Enables this item to reduce the CPU power consumption while idle. Not all
processors support Enhanced Halt state (C1E).
▶▶SVM Mode [Enabled]
Enables or disables CPU Virtualization.
[Enabled] Enables CPU Virtualization and allows a platform to run multiple
operating systems in independent partitions. The system can
function as multiple systems virtually.
[Disabled] Disables this function.
▶▶IOMMU Mode
Enables/disables the IOMMU (I/O Memory Management Unit) for I/O Virtualization.
Ahh, that would explain his clock speed fluctuations. My older MSI 990's would sooner melt into a puddle than throttle when power saving features etc. were disabled. As long as you are vigilant , you won't have problems, but if you make the assumption that it will protect itself....well then you are going to get a dose of " oh damn".

Well now we need a screen shot of temps when under load.. a CPUz shot as well showing voltage.. or uswing HWinfo64
Wet Billy
(15 items)
 
PHENOM Phoenix
(13 items)
 
 
CPUMotherboardGraphicsRAM
AMD FX 8350 @ 5.06GHz AsUS Sabertooth R2.0 xfx 280x DD Crucial Ballistex Tactical Tracer 1866Mhz 
Hard DriveOptical DriveCoolingCooling
Samsung 830 SSD 128GB LG BD-ROM/DVD Rewriter XSPC Raystorm RS240 kit A LOT OF FANS 
OSMonitorKeyboardPower
WIN 7 ultamate AOC 23" LED LCD Microsoft wireless laser 6000 Rosewill Capstone 750w 
CaseMouseMouse Pad
Coolermaster HAF 912 Microsoft wireless laser 6000 none 
CPUMotherboardGraphicsGraphics
phenom II x6 1100T MSI 990FXA-GD65 GTX 460 GTX 460 
RAMHard DriveOptical DriveCooling
Crucial Ballistix Tactical Tracer 8GB (2 x 4GB)... Samsung SSD 830  LG Blueray Coolermaster N520 
OSMonitorKeyboardPower
Win 7 Ultimate x64 AOC 1080p LED Microsoft OCZ 850w 
Case
Coolermaster HAF 912 
  hide details  
Reply
Wet Billy
(15 items)
 
PHENOM Phoenix
(13 items)
 
 
CPUMotherboardGraphicsRAM
AMD FX 8350 @ 5.06GHz AsUS Sabertooth R2.0 xfx 280x DD Crucial Ballistex Tactical Tracer 1866Mhz 
Hard DriveOptical DriveCoolingCooling
Samsung 830 SSD 128GB LG BD-ROM/DVD Rewriter XSPC Raystorm RS240 kit A LOT OF FANS 
OSMonitorKeyboardPower
WIN 7 ultamate AOC 23" LED LCD Microsoft wireless laser 6000 Rosewill Capstone 750w 
CaseMouseMouse Pad
Coolermaster HAF 912 Microsoft wireless laser 6000 none 
CPUMotherboardGraphicsGraphics
phenom II x6 1100T MSI 990FXA-GD65 GTX 460 GTX 460 
RAMHard DriveOptical DriveCooling
Crucial Ballistix Tactical Tracer 8GB (2 x 4GB)... Samsung SSD 830  LG Blueray Coolermaster N520 
OSMonitorKeyboardPower
Win 7 Ultimate x64 AOC 1080p LED Microsoft OCZ 850w 
Case
Coolermaster HAF 912 
  hide details  
Reply
post #53834 of 67694
Temps arent too bad under load. Those high/low dips in clock speed are at idle or loading windows. Its not a constant fluctuation. Under load clock speed holds at or very close to 4700mhz.

Temps can br seen in these recent screenshot i posted up a few pages back.




Variation in tmpin1 as im messing with fans on the back of the mobo blowing on the rear of the cpu socket. The cooler of the two is the current setup.

I have msi command center which i was using then i started just tweaking in bios. Seems easier to use command center for quickness though.
Edited by dmcl325i - 10/13/15 at 6:51am
Black Death
(21 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX 8350 MSI 970 Gaming Palit GTX 1080 Super Jetstream Kingston Hyper X Savage 
Hard DriveHard DriveOptical DriveCooling
Sandisk SSD Seagate Hybrid LG Blu Ray Corsair H55 Liquid CPU Cooler 
CoolingCoolingCoolingOS
2x Scythe slim 120mm case fans 80mm generic 2x front case fans Windows 10 
MonitorKeyboardPowerCase
Toshiba 48" 4k TV Logitech wireless Corsair RM1000 Corsair Carbide Spec-03 
MouseMouse PadAudioOther
Logitech wireless A rectangular one 2.1 system with woofer Xbox controller 
  hide details  
Reply
Black Death
(21 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX 8350 MSI 970 Gaming Palit GTX 1080 Super Jetstream Kingston Hyper X Savage 
Hard DriveHard DriveOptical DriveCooling
Sandisk SSD Seagate Hybrid LG Blu Ray Corsair H55 Liquid CPU Cooler 
CoolingCoolingCoolingOS
2x Scythe slim 120mm case fans 80mm generic 2x front case fans Windows 10 
MonitorKeyboardPowerCase
Toshiba 48" 4k TV Logitech wireless Corsair RM1000 Corsair Carbide Spec-03 
MouseMouse PadAudioOther
Logitech wireless A rectangular one 2.1 system with woofer Xbox controller 
  hide details  
Reply
post #53835 of 67694
Quote:
Originally Posted by dmcl325i View Post

Temps arent too bad under load. Those high/low dips in clock speed are at idle or loading windows. Its not a constant fluctuation. Under load clock speed holds at or very close to 4700mhz.

Temps can br seen in these recent screenshot i posted up a few pages back.




Variation in tmpin1 as im messing with fans on the back of the mobo blowing on the rear of the cpu socket. The cooler of the two is the current setup.

I have msi command center which i was using then i started just tweaking in bios. Seems easier to use command center for quickness though.

I don't think you are using the right version of IBT, Gflops are too low. Are you using the one listed in the op?
Ryzen Shine!
(14 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 1800X @ 4125mhz 1.432 Volts MSI X370 Titanium   Fury  G.SKILL TridentZ Series 32GB (4 x 8GB) 288-Pin... 
Hard DriveOptical DriveCoolingOS
Samsung 850 pro Hp 1260 I liquid unobtanium Koolance 480mm radiator, 39... Win 7 HP/Winspy 10 64bit 
MonitorKeyboardPowerCase
24" hp @ 1900x1200 Logitech G19 PC power and cooling 910 watt silencer Thermaltake P5 
MouseMouse Pad
Logitech MX 518 fUnc industries 
  hide details  
Reply
Ryzen Shine!
(14 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 1800X @ 4125mhz 1.432 Volts MSI X370 Titanium   Fury  G.SKILL TridentZ Series 32GB (4 x 8GB) 288-Pin... 
Hard DriveOptical DriveCoolingOS
Samsung 850 pro Hp 1260 I liquid unobtanium Koolance 480mm radiator, 39... Win 7 HP/Winspy 10 64bit 
MonitorKeyboardPowerCase
24" hp @ 1900x1200 Logitech G19 PC power and cooling 910 watt silencer Thermaltake P5 
MouseMouse Pad
Logitech MX 518 fUnc industries 
  hide details  
Reply
post #53836 of 67694
Yes
Black Death
(21 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX 8350 MSI 970 Gaming Palit GTX 1080 Super Jetstream Kingston Hyper X Savage 
Hard DriveHard DriveOptical DriveCooling
Sandisk SSD Seagate Hybrid LG Blu Ray Corsair H55 Liquid CPU Cooler 
CoolingCoolingCoolingOS
2x Scythe slim 120mm case fans 80mm generic 2x front case fans Windows 10 
MonitorKeyboardPowerCase
Toshiba 48" 4k TV Logitech wireless Corsair RM1000 Corsair Carbide Spec-03 
MouseMouse PadAudioOther
Logitech wireless A rectangular one 2.1 system with woofer Xbox controller 
  hide details  
Reply
Black Death
(21 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX 8350 MSI 970 Gaming Palit GTX 1080 Super Jetstream Kingston Hyper X Savage 
Hard DriveHard DriveOptical DriveCooling
Sandisk SSD Seagate Hybrid LG Blu Ray Corsair H55 Liquid CPU Cooler 
CoolingCoolingCoolingOS
2x Scythe slim 120mm case fans 80mm generic 2x front case fans Windows 10 
MonitorKeyboardPowerCase
Toshiba 48" 4k TV Logitech wireless Corsair RM1000 Corsair Carbide Spec-03 
MouseMouse PadAudioOther
Logitech wireless A rectangular one 2.1 system with woofer Xbox controller 
  hide details  
Reply
post #53837 of 67694
Quote:
Originally Posted by cssorkinman View Post

Quote:
Originally Posted by dmcl325i View Post

Temps arent too bad under load. Those high/low dips in clock speed are at idle or loading windows. Its not a constant fluctuation. Under load clock speed holds at or very close to 4700mhz.

Temps can br seen in these recent screenshot i posted up a few pages back.




Variation in tmpin1 as im messing with fans on the back of the mobo blowing on the rear of the cpu socket. The cooler of the two is the current setup.

I have msi command center which i was using then i started just tweaking in bios. Seems easier to use command center for quickness though.

I don't think you are using the right version of IBT, Gflops are too low. Are you using the one listed in the op?

TMPIN1 is causing a throttle He has the correct version.. this is that feature that is throttling and most likely causing other issues

Only way to correct this is to cool down the socket/VRM area.. not sure where TMPIN1 is atm.. don't have time to look back at the manual

EDIT: corrected sensor
Edited by F3ERS 2 ASH3S - 10/13/15 at 9:36am
Wet Billy
(15 items)
 
PHENOM Phoenix
(13 items)
 
 
CPUMotherboardGraphicsRAM
AMD FX 8350 @ 5.06GHz AsUS Sabertooth R2.0 xfx 280x DD Crucial Ballistex Tactical Tracer 1866Mhz 
Hard DriveOptical DriveCoolingCooling
Samsung 830 SSD 128GB LG BD-ROM/DVD Rewriter XSPC Raystorm RS240 kit A LOT OF FANS 
OSMonitorKeyboardPower
WIN 7 ultamate AOC 23" LED LCD Microsoft wireless laser 6000 Rosewill Capstone 750w 
CaseMouseMouse Pad
Coolermaster HAF 912 Microsoft wireless laser 6000 none 
CPUMotherboardGraphicsGraphics
phenom II x6 1100T MSI 990FXA-GD65 GTX 460 GTX 460 
RAMHard DriveOptical DriveCooling
Crucial Ballistix Tactical Tracer 8GB (2 x 4GB)... Samsung SSD 830  LG Blueray Coolermaster N520 
OSMonitorKeyboardPower
Win 7 Ultimate x64 AOC 1080p LED Microsoft OCZ 850w 
Case
Coolermaster HAF 912 
  hide details  
Reply
Wet Billy
(15 items)
 
PHENOM Phoenix
(13 items)
 
 
CPUMotherboardGraphicsRAM
AMD FX 8350 @ 5.06GHz AsUS Sabertooth R2.0 xfx 280x DD Crucial Ballistex Tactical Tracer 1866Mhz 
Hard DriveOptical DriveCoolingCooling
Samsung 830 SSD 128GB LG BD-ROM/DVD Rewriter XSPC Raystorm RS240 kit A LOT OF FANS 
OSMonitorKeyboardPower
WIN 7 ultamate AOC 23" LED LCD Microsoft wireless laser 6000 Rosewill Capstone 750w 
CaseMouseMouse Pad
Coolermaster HAF 912 Microsoft wireless laser 6000 none 
CPUMotherboardGraphicsGraphics
phenom II x6 1100T MSI 990FXA-GD65 GTX 460 GTX 460 
RAMHard DriveOptical DriveCooling
Crucial Ballistix Tactical Tracer 8GB (2 x 4GB)... Samsung SSD 830  LG Blueray Coolermaster N520 
OSMonitorKeyboardPower
Win 7 Ultimate x64 AOC 1080p LED Microsoft OCZ 850w 
Case
Coolermaster HAF 912 
  hide details  
Reply
post #53838 of 67694
Quote:
Originally Posted by dmcl325i View Post

Will do shortly when im back at the pc. Fwiw i dont know if you guys think i have been solid at this since i started posting in here but 70% of the time im not at the pc so i havent been spending nearly as much time on tweaking and testing as yoy guys might be thinking..

Im still on 4.7ghz as it seems somewhat stable. Its not perfect but it doesnt throw up errors in IBT most of the time (benny reckons could be ram or something else causing an intermittant error message in IBT sometimes). So i have left it more or less as is and been looking into other things like getting back to working on an OC for my radeon r9 360 as when i left it last i was only at +2% power limit and +4% clock speed. Its been on default setting whenever i have been messing with cpu clock speeds and whatnot though as i figure leaving it on OC settings would probably only complicate things.

Oh no, don't worry, we know that you don't spend much time testing etc lmao. wink.gif
Kraken
(5 items)
 
500R Chernobyl
(11 items)
 
 
CPUMotherboardGraphicsRAM
i5 4670k Asus Maximus VII Ranger MSI GTX 970 Hyper X Savage  
Cooling
Custom Loop 
CPUMotherboardGraphicsRAM
FX8350 Asus Sabretooth 990FX R2.0 EVGA GTX970 FTW Hyper x HX324C11SRK2/16 
CoolingCoolingCoolingCooling
EK AMD LTX XSPC Nylon Dual 5.25 Reservoir Inc Laing D5  Coolgate Triple HD360 Alphacool NexXxoS XT45 Full Copper 240mm 
OSMonitorCase
Windows 7 Ultimate Samsung SyncMaster 2032BW Carbide Series® 500R White Mid-Tower Case 
  hide details  
Reply
Kraken
(5 items)
 
500R Chernobyl
(11 items)
 
 
CPUMotherboardGraphicsRAM
i5 4670k Asus Maximus VII Ranger MSI GTX 970 Hyper X Savage  
Cooling
Custom Loop 
CPUMotherboardGraphicsRAM
FX8350 Asus Sabretooth 990FX R2.0 EVGA GTX970 FTW Hyper x HX324C11SRK2/16 
CoolingCoolingCoolingCooling
EK AMD LTX XSPC Nylon Dual 5.25 Reservoir Inc Laing D5  Coolgate Triple HD360 Alphacool NexXxoS XT45 Full Copper 240mm 
OSMonitorCase
Windows 7 Ultimate Samsung SyncMaster 2032BW Carbide Series® 500R White Mid-Tower Case 
  hide details  
Reply
post #53839 of 67694
A trick I had to use on my Sabertooth was to set the ram at a lower clock than it is rated for and then it would crank up the FSB just fine. My GD80 does not have that problem and I set the ram to 1866 and go up from there. But not far as it doesn't like that at all.
Junkyard Dog
(17 items)
 
Blackie
(17 items)
 
 
CPUMotherboardGraphicsRAM
AMD Ryzen 1700 Biostar X370 GT7 Sapphire Nitro Fury G. Skill Ripjaws ddr4 3200 16 GB 4x4 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 EVO 500gb SSD Western Digital 500gb  Memorex Lightscribe dvd Thermalright Silver Arrow IB-E Extreme 
OSMonitorKeyboardPower
Win 10 64bit Pixio 27" 1440P yes Seasonic 850 watt  
CaseMouseMouse PadAudio
Silverstone Redline RL05 Evoluent vertical mouse yes Creative X-FI  
Other
Sennheiser headphones 
CPUMotherboardGraphicsRAM
AMD FX8370 @ 5 ghz ASUS Sabertooth Sapphire Fury G Skill F3-14900CL9Q-16GBXL 
Hard DriveHard DriveOptical DriveCooling
Western Digital Samsung 850 EVO Memorex Lightscribe dvd Thermalright Silver Arrow IB-E Extreme 
OSMonitorKeyboardPower
Win X 64 bit Pixio 27" 1440P  yes Seasonic SS-850KM Active PFC F3 
CaseMouseMouse PadAudio
Silverstone Redline RL02b Evoluent VM4 yes Creative Soundblaster Z  
Audio
Sennheiser 428 headphones 
  hide details  
Reply
Junkyard Dog
(17 items)
 
Blackie
(17 items)
 
 
CPUMotherboardGraphicsRAM
AMD Ryzen 1700 Biostar X370 GT7 Sapphire Nitro Fury G. Skill Ripjaws ddr4 3200 16 GB 4x4 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 EVO 500gb SSD Western Digital 500gb  Memorex Lightscribe dvd Thermalright Silver Arrow IB-E Extreme 
OSMonitorKeyboardPower
Win 10 64bit Pixio 27" 1440P yes Seasonic 850 watt  
CaseMouseMouse PadAudio
Silverstone Redline RL05 Evoluent vertical mouse yes Creative X-FI  
Other
Sennheiser headphones 
CPUMotherboardGraphicsRAM
AMD FX8370 @ 5 ghz ASUS Sabertooth Sapphire Fury G Skill F3-14900CL9Q-16GBXL 
Hard DriveHard DriveOptical DriveCooling
Western Digital Samsung 850 EVO Memorex Lightscribe dvd Thermalright Silver Arrow IB-E Extreme 
OSMonitorKeyboardPower
Win X 64 bit Pixio 27" 1440P  yes Seasonic SS-850KM Active PFC F3 
CaseMouseMouse PadAudio
Silverstone Redline RL02b Evoluent VM4 yes Creative Soundblaster Z  
Audio
Sennheiser 428 headphones 
  hide details  
Reply
post #53840 of 67694
Quote:
Originally Posted by F3ERS 2 ASH3S View Post

TMPIN1 is causing a throttle He has the correct version.. this is that feature that is throttling and most likely causing other issues

Only way to correct this is to cool down the socket/VRM area.. not sure where TMPIN1 is atm.. don't have time to look back at the manual

EDIT: corrected sensor

I don't think it's throttling. If it was throttling, in the screenshots, there would be minimum frequency 1400Mhz. I think what's happening, is that he is simply dancing at the edge of what the mosfets can give as stable power. Remember, it's 6+2 motherboard, not 8+2. The mosfet efficiency drops when temp increases. So what happens (i guess), is that when his mosfets are hotter, he fails IBT. When it happens that his ambient is a bit lower and his mosfets stay a liiiitle cooler, he passes.

At any case, if it was my rig, i 'd drop at LEAST to 4.6Ghz, because the user "Superkames", who has a review site and first reviewed the board here, was also stuck at 4.7 and the motherboard died a few hours later. Having the motherboard struggling for its life is never good, especially when your mosfet brand isn't exactly the best out there (i am being polite), but it's his computer, he can decide...
Edited by Undervolter - 10/13/15 at 11:15am
Main
(16 items)
 
Dedicated Encoder
(15 items)
 
 
CPUMotherboardGraphicsRAM
FX-8320@4Ghz Gigabyte 970 UD3P rev2.1 Gainward GTX 750Ti Corsair XMS3 1600Mhz 16GB (4x4GB) 
Hard DriveHard DriveOptical DriveOptical Drive
Crucial BX100 250GB Western Digital Green 2TB LiteOn Blu-Ray Burner IHBS 112-2 LG BH16NS55 Blu-Ray Burner 
CoolingOSMonitorKeyboard
Scythe Katana 3 Windows 7 Pro 64bit ASUS 22" VS228HR Microsoft Wired Keyboard 600 
PowerCaseMouseAudio
EVGA 430W Sharkoon VG4-V Logitech M90 Onboard 
CPUMotherboardGraphicsRAM
FX-8300 Asrock 970 Extreme3 HIS 6570 Silence Corsair XMS3 1600Mhz 8GB (2x4GB) CAS9 
Hard DriveHard DriveOptical DriveCooling
Plextor M6S 128GB Toshiba 2TB SATAIII LiteOn Blu Ray burner IHBS 112-2 Xigmatek Balder 
OSMonitorKeyboardPower
Windows 7 Pro 64bit Samsung S22B350H Microsoft Wired 600 Corsair VS350 
CaseMouseAudio
Lepa LPC 306 Logitech M90 Onboard 
  hide details  
Reply
Main
(16 items)
 
Dedicated Encoder
(15 items)
 
 
CPUMotherboardGraphicsRAM
FX-8320@4Ghz Gigabyte 970 UD3P rev2.1 Gainward GTX 750Ti Corsair XMS3 1600Mhz 16GB (4x4GB) 
Hard DriveHard DriveOptical DriveOptical Drive
Crucial BX100 250GB Western Digital Green 2TB LiteOn Blu-Ray Burner IHBS 112-2 LG BH16NS55 Blu-Ray Burner 
CoolingOSMonitorKeyboard
Scythe Katana 3 Windows 7 Pro 64bit ASUS 22" VS228HR Microsoft Wired Keyboard 600 
PowerCaseMouseAudio
EVGA 430W Sharkoon VG4-V Logitech M90 Onboard 
CPUMotherboardGraphicsRAM
FX-8300 Asrock 970 Extreme3 HIS 6570 Silence Corsair XMS3 1600Mhz 8GB (2x4GB) CAS9 
Hard DriveHard DriveOptical DriveCooling
Plextor M6S 128GB Toshiba 2TB SATAIII LiteOn Blu Ray burner IHBS 112-2 Xigmatek Balder 
OSMonitorKeyboardPower
Windows 7 Pro 64bit Samsung S22B350H Microsoft Wired 600 Corsair VS350 
CaseMouseAudio
Lepa LPC 306 Logitech M90 Onboard 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › [OFFICIAL] FX-8320/FX-8350 Vishera Owners Club