Overclock.net › Forums › AMD › AMD CPUs › [OFFICIAL] FX-8320/FX-8350 Vishera Owners Club
New Posts  All Forums:Forum Nav:

[OFFICIAL] FX-8320/FX-8350 Vishera Owners Club - Page 6154

post #61531 of 67694
I am not sure if this is true of all ASRock boards, but my 970 Fatality has a +0.05v offset that is enabled at default.

This value seems to affect not only the main Vcore, but also the CPU-NB. I am not sure if it also applies to any other voltages like the main NB or the HT link. It might.

It would not suprise me at all if a portion of the issues with newer enthusists and ASRock boards are related to people putting more voltage on things than they intended to becasue they didnt disable or acount for this bumb.
post #61532 of 67694
Quote:
Originally Posted by turbobooster View Post

Quote:
Originally Posted by mus1mus View Post

Lucky you then. thumb.gif

Don't neglect airflow on the VRMs and don't push it further when voltages required would be high.

for 4.7ghz i use 1.3625v in bios, under load it will give me 1.4v i have the corsair 730t case with 2 fans in the front , (intake), 1 in the rear (outtake), 2 fans on the cooler pushing hot air out, and 1 fan in the bottom pushing cold air in.

i did a 3d vantage run at 4.864ghz and just set the voltage at 1.3875v in bios, load it was 1.432v

tried 5.0ghz at 1.4v and made a cpu-z validation, http://valid.x86.fr/5np1gc

What have you used for stability testing?
Bench
(9 items)
 
Intel Bench
(8 items)
 
DVD Player
(5 items)
 
CPUMotherboardGraphicsRAM
FX 9370,FX 8350, FX 6350, PII X4 965 ASUS Crosshair V Formula z, ASUS Sabertooth 990... 2x ASUS GTX580 DCUII, ASUS HD 6970 G.Skill Flare 1800, Pi Black 2000 
Hard DriveCoolingOSPower
Kingston Hyperx 3K Phobya Supernova 1260 Koolance 380a Win7 Pro 64 Leadex SuperFlower 1K 
Case
Banchetto 101 
CPUMotherboardGraphicsRAM
i7 6700k Asus Maximus VIII Hero Evga GTX 980Ti K|NGP|N G.Skill TridentZ 3600 
Hard DriveCoolingOSPower
Samsung 850 Pro Dragon Extreme F1 Windows 7 / Vista /XP Superflower Leadex 
CPUMotherboardGraphicsRAM
Ryzen 5 1600x MSI x370 Titanium ASUS GTX980 DCII G.Skill Trident Z RGB  
Case
Phanteks Enthoo Luxe 
  hide details  
Reply
Bench
(9 items)
 
Intel Bench
(8 items)
 
DVD Player
(5 items)
 
CPUMotherboardGraphicsRAM
FX 9370,FX 8350, FX 6350, PII X4 965 ASUS Crosshair V Formula z, ASUS Sabertooth 990... 2x ASUS GTX580 DCUII, ASUS HD 6970 G.Skill Flare 1800, Pi Black 2000 
Hard DriveCoolingOSPower
Kingston Hyperx 3K Phobya Supernova 1260 Koolance 380a Win7 Pro 64 Leadex SuperFlower 1K 
Case
Banchetto 101 
CPUMotherboardGraphicsRAM
i7 6700k Asus Maximus VIII Hero Evga GTX 980Ti K|NGP|N G.Skill TridentZ 3600 
Hard DriveCoolingOSPower
Samsung 850 Pro Dragon Extreme F1 Windows 7 / Vista /XP Superflower Leadex 
CPUMotherboardGraphicsRAM
Ryzen 5 1600x MSI x370 Titanium ASUS GTX980 DCII G.Skill Trident Z RGB  
Case
Phanteks Enthoo Luxe 
  hide details  
Reply
post #61533 of 67694
Quote:
Originally Posted by turbobooster View Post

for 4.7ghz i use 1.3625v in bios, under load it will give me 1.4v i have the corsair 730t case with 2 fans in the front , (intake), 1 in the rear (outtake), 2 fans on the cooler pushing hot air out, and 1 fan in the bottom pushing cold air in.

i did a 3d vantage run at 4.864ghz and just set the voltage at 1.3875v in bios, load it was 1.432v

tried 5.0ghz at 1.4v and made a cpu-z validation, http://valid.x86.fr/5np1gc

While I agree Vantage is hard to pass on the CPU Test, it's just about the same as Cinebench. And Cinebench is nowhere near as hard to pass as AIDA 64. And even AIDA64 will be mediocred by IBT AVX. thumb.gif

But on your board, I would try to stay away from IBT AVX. It will burn your board. Stay with your testing that prove stability on your daily tasks. I won't question you. But it's just me. wink.gif
post #61534 of 67694
Quote:
Originally Posted by Johan45 View Post

What have you used for stability testing?


well johan i never do the stability test like you all do, i never run 4, 8 hours itb ore linx because it is hot in holland now i did both programs on very high for about 20 minutes, then i did cinebench, realbench hwbot couple of benchmarks like vantage, fire strike, and then a game, ore use cinema 4d and i never had a problem with it


sorry for the white tape on the picture, its gone now hahaha


o26v.jpg
Edited by turbobooster - 7/27/16 at 8:16am
post #61535 of 67694
Stability is up to you. I run my HTPC at 4.6, FX9370 because it's hot here too. I'm old school typically P95 for a couple hours is good enough for me
Bench
(9 items)
 
Intel Bench
(8 items)
 
DVD Player
(5 items)
 
CPUMotherboardGraphicsRAM
FX 9370,FX 8350, FX 6350, PII X4 965 ASUS Crosshair V Formula z, ASUS Sabertooth 990... 2x ASUS GTX580 DCUII, ASUS HD 6970 G.Skill Flare 1800, Pi Black 2000 
Hard DriveCoolingOSPower
Kingston Hyperx 3K Phobya Supernova 1260 Koolance 380a Win7 Pro 64 Leadex SuperFlower 1K 
Case
Banchetto 101 
CPUMotherboardGraphicsRAM
i7 6700k Asus Maximus VIII Hero Evga GTX 980Ti K|NGP|N G.Skill TridentZ 3600 
Hard DriveCoolingOSPower
Samsung 850 Pro Dragon Extreme F1 Windows 7 / Vista /XP Superflower Leadex 
CPUMotherboardGraphicsRAM
Ryzen 5 1600x MSI x370 Titanium ASUS GTX980 DCII G.Skill Trident Z RGB  
Case
Phanteks Enthoo Luxe 
  hide details  
Reply
Bench
(9 items)
 
Intel Bench
(8 items)
 
DVD Player
(5 items)
 
CPUMotherboardGraphicsRAM
FX 9370,FX 8350, FX 6350, PII X4 965 ASUS Crosshair V Formula z, ASUS Sabertooth 990... 2x ASUS GTX580 DCUII, ASUS HD 6970 G.Skill Flare 1800, Pi Black 2000 
Hard DriveCoolingOSPower
Kingston Hyperx 3K Phobya Supernova 1260 Koolance 380a Win7 Pro 64 Leadex SuperFlower 1K 
Case
Banchetto 101 
CPUMotherboardGraphicsRAM
i7 6700k Asus Maximus VIII Hero Evga GTX 980Ti K|NGP|N G.Skill TridentZ 3600 
Hard DriveCoolingOSPower
Samsung 850 Pro Dragon Extreme F1 Windows 7 / Vista /XP Superflower Leadex 
CPUMotherboardGraphicsRAM
Ryzen 5 1600x MSI x370 Titanium ASUS GTX980 DCII G.Skill Trident Z RGB  
Case
Phanteks Enthoo Luxe 
  hide details  
Reply
post #61536 of 67694
Quote:
Originally Posted by Johan45 View Post

Stability is up to you. I run my HTPC at 4.6, FX9370 because it's hot here too. I'm old school typically P95 for a couple hours is good enough for me


i can this run for along time with no problems at all


post #61537 of 67694
Run it longer than 12 hours if all you is AIDA 64.
post #61538 of 67694
Quote:
Originally Posted by mus1mus View Post

Run it longer than 12 hours if all you is AIDA 64.

like sad above, i,m not only using aida64
post #61539 of 67694
I saw that. And honestly, the most demanding app in there is AIDA 64.
post #61540 of 67694
Quote:
Originally Posted by mus1mus View Post

I saw that. And honestly, the most demanding app in there is AIDA 64.


the most demanding app is aida??? and what about Linx64 then
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › [OFFICIAL] FX-8320/FX-8350 Vishera Owners Club