Ok the front panel. I guess everyone's been waiting on this one. 
Mounted the fan, sat the panel in its frame. Moved up and marked top of fan.
Lay down panel, centralized the fan and lined up to top mark, then trace. As anticipated 7mm in from edges. What I didn't expect was it taking the bottom edge by 7mm. No biggie, just means I have to take a little out of the black panel.
Let the cutting begin! Still a bit rough, but it's the best this Boily can do. :lol:
Here's the panel in the frame and the piece I had to remove from the bottom of the black panel.
Mounted the fan, sat the panel in its frame. Moved up and marked top of fan.
Lay down panel, centralized the fan and lined up to top mark, then trace. As anticipated 7mm in from edges. What I didn't expect was it taking the bottom edge by 7mm. No biggie, just means I have to take a little out of the black panel.
Let the cutting begin! Still a bit rough, but it's the best this Boily can do. :lol:
Here's the panel in the frame and the piece I had to remove from the bottom of the black panel.
:thumbup:
