This Classified is Closed
For Sale:
HUGE case mod bundle package
Will Ship To: US48
I have a ton of old case mod supplies that I used to use a while back. However, I have not needed to use them for quite some time, and I do believe that I probably would never need these again. As much fun as building custom cases and modding was fun, I just don't have the time for it anymore. I am looking to sell this lot as a whole.
I also have a 24x48" sheet of acrylic for sale HERE.
1 Motherboard Tray
2 x 220mm fans, 1 Antec(Molex Connection and 3 speed) which has been used but still in perfect working order, and 1 Brand new Cooler Master(3 Pin connection).
Some pieces of 1/4" acrylic
Sunbeam Rheobus-Extreme Fan Controller(Comes with power cord)
2 x 600mm CCFL extension cables(Note: these do cause the lights to be a little dim)
60 x 5mm Flat top Red LEDs(1 or 2 may be missing from 1 pack)
60 x 1/4 watt resistors to be used with the LEDs
Some small 26ga wire to be used to connect the LEDs to the power source
A 6" UV molex Y splitter
A 6-32 tap used for creating the thread for motherboard standoffs
A 7/64 Drill bit to be used in conjunction with the 6-32 tap
A 1/4" - 19 tap used by most water cooling parts(As shown in picture, can be used to create custom reservoirs)
A 11.2mm Drill bit to be used in conjunction with the 1/4" - 19 tap
Several meters of 1/8" and 1/4" high quality thick braided wire sleeving
Several lengths of heat shrink wrap
Price negotiable, and anyone who lives close to the Pensacola, Florida area I would gladly give a discount to and meet locally.
Edited by Timlander - 10/31/12 at 11:31am
I also have a 24x48" sheet of acrylic for sale HERE.
1 Motherboard Tray
2 x 220mm fans, 1 Antec(Molex Connection and 3 speed) which has been used but still in perfect working order, and 1 Brand new Cooler Master(3 Pin connection).
Some pieces of 1/4" acrylic
Sunbeam Rheobus-Extreme Fan Controller(Comes with power cord)
2 x 600mm CCFL extension cables(Note: these do cause the lights to be a little dim)
60 x 5mm Flat top Red LEDs(1 or 2 may be missing from 1 pack)
60 x 1/4 watt resistors to be used with the LEDs
Some small 26ga wire to be used to connect the LEDs to the power source
A 6" UV molex Y splitter
A 6-32 tap used for creating the thread for motherboard standoffs
A 7/64 Drill bit to be used in conjunction with the 6-32 tap
A 1/4" - 19 tap used by most water cooling parts(As shown in picture, can be used to create custom reservoirs)
A 11.2mm Drill bit to be used in conjunction with the 1/4" - 19 tap
Several meters of 1/8" and 1/4" high quality thick braided wire sleeving
Several lengths of heat shrink wrap
Price negotiable, and anyone who lives close to the Pensacola, Florida area I would gladly give a discount to and meet locally.
Edited by Timlander - 10/31/12 at 11:31am
The Blue and Green Beast Machine.
(16 items) |
|
The Blue and Green Beast Machine.
(16 items) |
