New Posts  All Forums:Forum Nav:

Pls help

post #1 of 7
Thread Starter 
i have my computer and i installed a hdd from another computer and i'm trying to format it but unfortunately when i enter boot device and select cd/dvd rom it leads to a black screen with a some sort of a white blinking rectangle.. any suggestions?
post #2 of 7
Is there a CD in the CDROM drive?
post #3 of 7
Try unplugging everything but the optical drive and then plug in the HDD after you've booted from disc.
post #4 of 7
Thread Starter 
I unplugged the HDD and the Cd rom and the ram.. the cd rom in the boot device run.. thanks..
post #5 of 7
Do you have a memory key that you can make bootable and try booting from that. Could be that the drive or disk has a problem.
post #6 of 7
Quote:
Originally Posted by evo11amiel View Post

I unplugged the HDD and the Cd rom and the ram.. the cd rom in the boot device run.. thanks..
You disconnected the CDdrive?
post #7 of 7
Thread Starter 
cd drive and the hdd and the ram..and when i put i back again and run the boot i works..
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: General Processor Discussions