Overclock.net › Forums › Intel › Intel CPUs › Ivy Bridge Delid Success rates
New Posts  All Forums:Forum Nav:

Ivy Bridge Delid Success rates - Page 3

Poll Results: Ivy Bridge Delid first time success

 
  • 76% (134)
    First time success
  • 5% (9)
    First time fail - Nicked Die
  • 9% (17)
    First time fail - Nicked PCB
  • 1% (2)
    First time fail - Nicked Die and PCB
  • 2% (5)
    Failed other
  • 5% (9)
    Multiple Fails
176 Total Votes  
post #21 of 218
Quote:
Originally Posted by VonDutch View Post

that "default picture" is called Avatar,

lolz
this is one of the thinnest razor blades i can think off,

if you really need/want them for delid, i could sent you some from over here,
i think i can get them smile.gif
practice on some old pentiums is a real good thing to do, i you can..
just to get the feeling how to cut, and...how not too ..lol

Yeah, so far I've practiced with that exact blade on some old P4's that were just sitting here and have been for 2+ years. (If they've been there that long I figure why not?) and a working Celeron System is my testbed to see if the two Celerons I've had are successful, first Celeron I did had horribly dried paste that I couldn't remove, but it POSTED fine and entered the BIOS fine. I'm going to do the other one the day I do my 3570k to get my confidence up...

Thanks for the offer on the blade btw, but that would NEVER get through customs and I don't really need it as I've got one that works fine. Thankyou though +rep for being kind and offering.

I see you're also rocking the same board as me... What revision is it and what BIOS are you on? I can't seem to pull much speed from my Samsung memory with this board but I guess it's never been tested in anything else..

EDIT: I really hope that the IHS comes off easily.. I'm kind of scared of getting halfway and wanting to stop. I guess it'd still run fine as long as I don't dent it or anything with it half off. (Still half sealed) or if I dent the CPU... The worst case would be if I nicked the PCB of actual cores itself and either got a working 1, 2 or 3 core of a damaged IMC that can only run single channel.. That means I'd have a *spare* 8GB set of this RAM and less performance. If that's the case I might even sell it, if I destroy it I'd probably be able to convince my grandmother/auntie to replace it and say that I dropped it or something rolleyes.gif
As dodgy as that is... It'd work lol

EDIT2: I'll have to ask what type of blade that is...? Incase my blade is too thick.
Edited by Matt-Matt - 11/15/12 at 12:52am
 
Seven Seven Five
(12 items)
 
 
CPUMotherboardGraphicsRAM
Convertible i5 3570k (De-Lidded) Gigabyte Z77x-D3H XFX R9 290 With Koolance Block (1179/1450) 16GB G-Skill Ares 1866 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Evo Seagate Barracuda 2TB Western Digital Green 2TB Samsung Spinpoint 1TB 
Hard DriveOptical DriveCoolingCooling
Western Digital Green 640GB 2x OEM DVD Drives Heatkiller Rev 3.0 XSPC RX360 
CoolingCoolingCoolingOS
Laing D5 + XSPC Res Primochill Bloodshed Red Tubing Koolance Fullcover R9 290x Block Windows 10 Pro x64 
MonitorMonitorMonitorKeyboard
Asus VEH228H Asus VE228H Aavara TS742 Dual Monitor Stand Ducky Shine II Cherry Blue RED Backlit Mechanic... 
PowerCaseMouseMouse Pad
Silverstone Strider 850W HAF 932 Logitech G400 Gigabyte Ghost 
AudioOther
Microlab Solo6c Logitech C100 Webcam 
  hide details  
Reply
 
Seven Seven Five
(12 items)
 
 
CPUMotherboardGraphicsRAM
Convertible i5 3570k (De-Lidded) Gigabyte Z77x-D3H XFX R9 290 With Koolance Block (1179/1450) 16GB G-Skill Ares 1866 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Evo Seagate Barracuda 2TB Western Digital Green 2TB Samsung Spinpoint 1TB 
Hard DriveOptical DriveCoolingCooling
Western Digital Green 640GB 2x OEM DVD Drives Heatkiller Rev 3.0 XSPC RX360 
CoolingCoolingCoolingOS
Laing D5 + XSPC Res Primochill Bloodshed Red Tubing Koolance Fullcover R9 290x Block Windows 10 Pro x64 
MonitorMonitorMonitorKeyboard
Asus VEH228H Asus VE228H Aavara TS742 Dual Monitor Stand Ducky Shine II Cherry Blue RED Backlit Mechanic... 
PowerCaseMouseMouse Pad
Silverstone Strider 850W HAF 932 Logitech G400 Gigabyte Ghost 
AudioOther
Microlab Solo6c Logitech C100 Webcam 
  hide details  
Reply
post #22 of 218
Gigabyte Z77x-D3H , rev.1
using F15 bios now, works ok so far..had problems when i just bought it tho, the F5 bios,
not sure anymore what others i used, think it was F8 and F11..

get a pic in your head, where the die is etc..look for some pictures online..
and i said this before,
"its not the blade you use, but how you use it",
the box cutter i used is very thick compared to the razor blade pic i showed you,
which i dont really like, because it bents easy..

the pentiums we practice on, had the adhesive a little outside the ihs,
making it harder to get in between ihs pcb too, and yea, the tim is very old so..
http://www.youtube.com/watch?v=sNQ_hxtKXBs&feature=g-upl
my kiddo doing a corner of the pentium last weekend,
look at the end if the vid, if you cut through less then that in a corner, you should be fine,
not hitting die or anything smile.gif

yea, it prolly woulnt get past custom..o well..
its a razor blade, used with a holder like this,

old fashion, my stepfather used to have one..lol
Edited by VonDutch - 11/15/12 at 1:16am
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #23 of 218
Quote:
Originally Posted by VonDutch View Post

Gigabyte Z77x-D3H , rev.1
using F15 bios now, works ok so far..had problems when i just bought it tho, the F5 bios,
not sure anymore what others i used, think it was F8 and F11..
get a pic in your head, where the die is etc..look for some pictures online..
and i said this before,
"its not the blade you use, but how you use it",
the box cutter i used is very thick compared to the razor blade pic i showed you,
which i dont really like, because it bents easy..
the pentiums we practice on, had the adhesive a little outside the ihs,
making it harder to get in between ihs pcb too, and yea, the tim is very old so..
http://www.youtube.com/watch?v=sNQ_hxtKXBs&feature=g-upl
my kiddo doing a corner of the pentium last weekend,
look at the end if the vid, if you cut through less then that in a corner, you should be fine,
not hitting die or anything smile.gif
yea, it prolly woulnt get past custom..o well..
its a razor blade, used with a holder like this,

old fashion, my stepfather used to have one..lol

Yeah that's exactly what I did!
Wow that is so old! redface.gif
Yeah, do you have a high res picture of the CPU without the IHS on it? That'd be a heaps good reference.. .lol smile.gif
I know the ivies are a fair bit bigger then the Celeron that I did,
I'm using bios F17a I think... It's really good for the RAM! biggrin.gif
 
Seven Seven Five
(12 items)
 
 
CPUMotherboardGraphicsRAM
Convertible i5 3570k (De-Lidded) Gigabyte Z77x-D3H XFX R9 290 With Koolance Block (1179/1450) 16GB G-Skill Ares 1866 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Evo Seagate Barracuda 2TB Western Digital Green 2TB Samsung Spinpoint 1TB 
Hard DriveOptical DriveCoolingCooling
Western Digital Green 640GB 2x OEM DVD Drives Heatkiller Rev 3.0 XSPC RX360 
CoolingCoolingCoolingOS
Laing D5 + XSPC Res Primochill Bloodshed Red Tubing Koolance Fullcover R9 290x Block Windows 10 Pro x64 
MonitorMonitorMonitorKeyboard
Asus VEH228H Asus VE228H Aavara TS742 Dual Monitor Stand Ducky Shine II Cherry Blue RED Backlit Mechanic... 
PowerCaseMouseMouse Pad
Silverstone Strider 850W HAF 932 Logitech G400 Gigabyte Ghost 
AudioOther
Microlab Solo6c Logitech C100 Webcam 
  hide details  
Reply
 
Seven Seven Five
(12 items)
 
 
CPUMotherboardGraphicsRAM
Convertible i5 3570k (De-Lidded) Gigabyte Z77x-D3H XFX R9 290 With Koolance Block (1179/1450) 16GB G-Skill Ares 1866 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Evo Seagate Barracuda 2TB Western Digital Green 2TB Samsung Spinpoint 1TB 
Hard DriveOptical DriveCoolingCooling
Western Digital Green 640GB 2x OEM DVD Drives Heatkiller Rev 3.0 XSPC RX360 
CoolingCoolingCoolingOS
Laing D5 + XSPC Res Primochill Bloodshed Red Tubing Koolance Fullcover R9 290x Block Windows 10 Pro x64 
MonitorMonitorMonitorKeyboard
Asus VEH228H Asus VE228H Aavara TS742 Dual Monitor Stand Ducky Shine II Cherry Blue RED Backlit Mechanic... 
PowerCaseMouseMouse Pad
Silverstone Strider 850W HAF 932 Logitech G400 Gigabyte Ghost 
AudioOther
Microlab Solo6c Logitech C100 Webcam 
  hide details  
Reply
post #24 of 218
pentium 4

after we took of the soldered ihs also ..lol

didnt use that blade you see to delid, we put a few between ihs/pcb
when we tried to get the soldered ihs off smile.gif
the solder we could just scrape of, most of it, with that blade later on..
but that was just for fun, just to see if we could do it,
wouldnt tell/advice anyone to try get a soldered ihs off ..lol

3570K


about this far in, for a corner, and you should be good


i only go to the Gb site for my bios,
F16 on the gigabyte site is their latest
ill wait till the F17 shows up over there,
then at least i know its been tested and approved..lol
Edited by VonDutch - 11/15/12 at 3:04am
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #25 of 218
Quote:
Originally Posted by VonDutch View Post

pentium 4

after we took of the soldered ihs also ..lol
didnt use that blade you see to delid, we put a few between ihs/pcb
when we tried to get the soldered ihs off smile.gif
the solder we could just scrape of, most of it, with that blade later on..
but that was just for fun, just to see if we could do it,
wouldnt tell/advice anyone to try get a soldered ihs off ..lol
3570K

about this far in, for a corner, and you should be good

i only go to the Gb site for my bios,
F16 on the gigabyte site is their latest
ill wait till the F17 shows up over there,
then at least i know its been tested and approved..lol

My F17a beta is fine.. It's really stable compared to F5 and F6 for me. Pressing F1 and going to the "Mouse Mode" as I call it.. Well going into the memory menu there would just crash the BIOS which was really bad.
Ah it's a BIC blade? Those guys make pens too tongue.gif
I'll definetly be keeping that 3570k photo for reference though, I knew it wasn't a square shaped CPU (under the IHS) like the Celeron/P4's. My new problem is cleaning the CPU die itself. Would metho be OK? Thankyou for the picture +rep
I'll probably even print the picture off or put it on my phone.. Just so I know how far I can go on each side. smile.gif
 
Seven Seven Five
(12 items)
 
 
CPUMotherboardGraphicsRAM
Convertible i5 3570k (De-Lidded) Gigabyte Z77x-D3H XFX R9 290 With Koolance Block (1179/1450) 16GB G-Skill Ares 1866 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Evo Seagate Barracuda 2TB Western Digital Green 2TB Samsung Spinpoint 1TB 
Hard DriveOptical DriveCoolingCooling
Western Digital Green 640GB 2x OEM DVD Drives Heatkiller Rev 3.0 XSPC RX360 
CoolingCoolingCoolingOS
Laing D5 + XSPC Res Primochill Bloodshed Red Tubing Koolance Fullcover R9 290x Block Windows 10 Pro x64 
MonitorMonitorMonitorKeyboard
Asus VEH228H Asus VE228H Aavara TS742 Dual Monitor Stand Ducky Shine II Cherry Blue RED Backlit Mechanic... 
PowerCaseMouseMouse Pad
Silverstone Strider 850W HAF 932 Logitech G400 Gigabyte Ghost 
AudioOther
Microlab Solo6c Logitech C100 Webcam 
  hide details  
Reply
 
Seven Seven Five
(12 items)
 
 
CPUMotherboardGraphicsRAM
Convertible i5 3570k (De-Lidded) Gigabyte Z77x-D3H XFX R9 290 With Koolance Block (1179/1450) 16GB G-Skill Ares 1866 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Evo Seagate Barracuda 2TB Western Digital Green 2TB Samsung Spinpoint 1TB 
Hard DriveOptical DriveCoolingCooling
Western Digital Green 640GB 2x OEM DVD Drives Heatkiller Rev 3.0 XSPC RX360 
CoolingCoolingCoolingOS
Laing D5 + XSPC Res Primochill Bloodshed Red Tubing Koolance Fullcover R9 290x Block Windows 10 Pro x64 
MonitorMonitorMonitorKeyboard
Asus VEH228H Asus VE228H Aavara TS742 Dual Monitor Stand Ducky Shine II Cherry Blue RED Backlit Mechanic... 
PowerCaseMouseMouse Pad
Silverstone Strider 850W HAF 932 Logitech G400 Gigabyte Ghost 
AudioOther
Microlab Solo6c Logitech C100 Webcam 
  hide details  
Reply
post #26 of 218
I want to hear from the guy who nicked the PCB.. I thought anyone who did something wrong might have wanted to post to warn other or something.
Downgraded 2.0
(11 items)
 
  
CPUMotherboardGraphicsRAM
intel i3 4130 msi b85-g41 EVGA GTX680 Samsung 30nm god sticks 
Hard DriveHard DriveOptical DriveOS
Western Digital Caviar Black 1TB Crucial M4 LiteOn iHES108 Windows 10 Pro x64 
KeyboardPowerCase
rosewill rk9000re Corsair HX650W CHIEFTEC Bravo BL-01B 
  hide details  
Reply
Downgraded 2.0
(11 items)
 
  
CPUMotherboardGraphicsRAM
intel i3 4130 msi b85-g41 EVGA GTX680 Samsung 30nm god sticks 
Hard DriveHard DriveOptical DriveOS
Western Digital Caviar Black 1TB Crucial M4 LiteOn iHES108 Windows 10 Pro x64 
KeyboardPowerCase
rosewill rk9000re Corsair HX650W CHIEFTEC Bravo BL-01B 
  hide details  
Reply
post #27 of 218
Quote:
Originally Posted by feniks View Post

it helps to soak the glue in alcohol, the stronger one the better, I used 70% isopropyl and wished for something more concentrated. after soaking it for a bit, it comes off mostly easy wink.gif

i can buy spiritus over here,

"94% denatured ethanol sold in a bottle for household use",
http://www.overclock.net/t/1309867/short-and-direct-delid-guide-ivy-bridge/190#post_18593346


posted this elsewhere, or what they call, rubbing alcohol..
im using it to clean die, pcb, ihs etc..
did work on the last bits of adhesive too, like feniks said, let it soak for a while,
if you use just a bit on a paper towl , or something like it,
you can see it evaporate almost instantly..

looking for a way to solve the adhesive, without using blades etc,
someone suggested Nail Polish Remover, not sure what it will do to the pcb tho,
little project next time if my kids are here, my ex has Nail Polish Remover,
my kids will borrow it from her .. hehe...

edit:
thnks for the rep's thumb.gif
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #28 of 218
Quote:
Originally Posted by VonDutch View Post

i can buy spiritus over here,

"94% denatured ethanol sold in a bottle for household use",
http://www.overclock.net/t/1309867/short-and-direct-delid-guide-ivy-bridge/190#post_18593346
posted this elsewhere, or what they call, rubbing alcohol..
im using it to clean die, pcb, ihs etc..
did work on the last bits of adhesive too, like feniks said, let it soak for a while,
if you use just a bit on a paper towl , or something like it,
you can see it evaporate almost instantly..
looking for a way to solve the adhesive, without using blades etc,
someone suggested Nail Polish Remover, not sure what it will do to the pcb tho,
little project next time if my kids are here, my ex has Nail Polish Remover,
my kids will borrow it from her .. hehe...

edit:
thnks for the rep's thumb.gif

haha, that's so sneaky! tongue.gif
I've actually got some here... I have no way to test longentivity of the CPU though, I think I'll just scratch it off with my nails or try acetone as there's heaps of that in the shed. Also what do you guys mean about "soaking" it in it? The entire CPU? redface.gif

I think the guy who "Nicked" the PCB is too scared to post photos (I've seen one) because it's a real shame and kind of an embarassment.. I dunno,
 
Seven Seven Five
(12 items)
 
 
CPUMotherboardGraphicsRAM
Convertible i5 3570k (De-Lidded) Gigabyte Z77x-D3H XFX R9 290 With Koolance Block (1179/1450) 16GB G-Skill Ares 1866 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Evo Seagate Barracuda 2TB Western Digital Green 2TB Samsung Spinpoint 1TB 
Hard DriveOptical DriveCoolingCooling
Western Digital Green 640GB 2x OEM DVD Drives Heatkiller Rev 3.0 XSPC RX360 
CoolingCoolingCoolingOS
Laing D5 + XSPC Res Primochill Bloodshed Red Tubing Koolance Fullcover R9 290x Block Windows 10 Pro x64 
MonitorMonitorMonitorKeyboard
Asus VEH228H Asus VE228H Aavara TS742 Dual Monitor Stand Ducky Shine II Cherry Blue RED Backlit Mechanic... 
PowerCaseMouseMouse Pad
Silverstone Strider 850W HAF 932 Logitech G400 Gigabyte Ghost 
AudioOther
Microlab Solo6c Logitech C100 Webcam 
  hide details  
Reply
 
Seven Seven Five
(12 items)
 
 
CPUMotherboardGraphicsRAM
Convertible i5 3570k (De-Lidded) Gigabyte Z77x-D3H XFX R9 290 With Koolance Block (1179/1450) 16GB G-Skill Ares 1866 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Evo Seagate Barracuda 2TB Western Digital Green 2TB Samsung Spinpoint 1TB 
Hard DriveOptical DriveCoolingCooling
Western Digital Green 640GB 2x OEM DVD Drives Heatkiller Rev 3.0 XSPC RX360 
CoolingCoolingCoolingOS
Laing D5 + XSPC Res Primochill Bloodshed Red Tubing Koolance Fullcover R9 290x Block Windows 10 Pro x64 
MonitorMonitorMonitorKeyboard
Asus VEH228H Asus VE228H Aavara TS742 Dual Monitor Stand Ducky Shine II Cherry Blue RED Backlit Mechanic... 
PowerCaseMouseMouse Pad
Silverstone Strider 850W HAF 932 Logitech G400 Gigabyte Ghost 
AudioOther
Microlab Solo6c Logitech C100 Webcam 
  hide details  
Reply
post #29 of 218
Quote:
Originally Posted by Matt-Matt View Post

haha, that's so sneaky! tongue.gif
I've actually got some here... I have no way to test longentivity of the CPU though, I think I'll just scratch it off with my nails or try acetone as there's heaps of that in the shed. Also what do you guys mean about "soaking" it in it? The entire CPU? redface.gif
I think the guy who "Nicked" the PCB is too scared to post photos (I've seen one) because it's a real shame and kind of an embarassment.. I dunno,

nails is good, and a credit card to scrape it off works too,
i think soaking means, using a q-tip or paper towl to put some/a little on the adhesive,
leave it on there for a while, then clean it..

let me try first with the aceton and nail polish remover,
not sure if it harms the pcb also..
but spiritus works for sure for the other cleaning, always used it,
never had any problem..
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #30 of 218
Quote:
Originally Posted by VonDutch View Post

nails is good, and a credit card to scrape it off works too,
i think soaking means, using a q-tip or paper towl to put some/a little on the adhesive,
leave it on there for a while, then clean it..
let me try first with the aceton and nail polish remover,
not sure if it harms the pcb also..
but spiritus works for sure for the other cleaning, always used it,
never had any problem..

Okay awesome, like I've said about 10x methylated spirits is good for using on the core/under the IHS? smile.gif
 
Seven Seven Five
(12 items)
 
 
CPUMotherboardGraphicsRAM
Convertible i5 3570k (De-Lidded) Gigabyte Z77x-D3H XFX R9 290 With Koolance Block (1179/1450) 16GB G-Skill Ares 1866 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Evo Seagate Barracuda 2TB Western Digital Green 2TB Samsung Spinpoint 1TB 
Hard DriveOptical DriveCoolingCooling
Western Digital Green 640GB 2x OEM DVD Drives Heatkiller Rev 3.0 XSPC RX360 
CoolingCoolingCoolingOS
Laing D5 + XSPC Res Primochill Bloodshed Red Tubing Koolance Fullcover R9 290x Block Windows 10 Pro x64 
MonitorMonitorMonitorKeyboard
Asus VEH228H Asus VE228H Aavara TS742 Dual Monitor Stand Ducky Shine II Cherry Blue RED Backlit Mechanic... 
PowerCaseMouseMouse Pad
Silverstone Strider 850W HAF 932 Logitech G400 Gigabyte Ghost 
AudioOther
Microlab Solo6c Logitech C100 Webcam 
  hide details  
Reply
 
Seven Seven Five
(12 items)
 
 
CPUMotherboardGraphicsRAM
Convertible i5 3570k (De-Lidded) Gigabyte Z77x-D3H XFX R9 290 With Koolance Block (1179/1450) 16GB G-Skill Ares 1866 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Evo Seagate Barracuda 2TB Western Digital Green 2TB Samsung Spinpoint 1TB 
Hard DriveOptical DriveCoolingCooling
Western Digital Green 640GB 2x OEM DVD Drives Heatkiller Rev 3.0 XSPC RX360 
CoolingCoolingCoolingOS
Laing D5 + XSPC Res Primochill Bloodshed Red Tubing Koolance Fullcover R9 290x Block Windows 10 Pro x64 
MonitorMonitorMonitorKeyboard
Asus VEH228H Asus VE228H Aavara TS742 Dual Monitor Stand Ducky Shine II Cherry Blue RED Backlit Mechanic... 
PowerCaseMouseMouse Pad
Silverstone Strider 850W HAF 932 Logitech G400 Gigabyte Ghost 
AudioOther
Microlab Solo6c Logitech C100 Webcam 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Ivy Bridge Delid Success rates