[Build Log] X-Predator Build

Hi guys..im Nicolas from Italy and i want show you my system and my liquid cooling project..
i have a billion photo of all my assembling but i put here only the most important.. i hope you like my project..

So..last week i sold my pc ... and now i wait the hardware for my next build..
I decide to make a build log of my last gaming machine...

First Hardware and components...

- CASE: AEROCOOL X-PREDATOR BLACK EDITION

- CPU: Intel i7 950 3,7Ghz 4 Core Lga 1366 8mb 130w

- MOBO: ASUS SABERTOOTH X58

- GPU: Nvidia GX 560 Ti Amp Edition By Zotac 1Gb

- RAM: Corsair Vengeance 12Gb Kit 3 x 4Gb - 1600MHz - CL9

- System SSD OCZ AGILITY 120 gb Sata 3

- HD1: WESTERN DIGITAL VELOCIRAPTOR 600gb 10.000rpm

- HD2: SAMSUNG 1TB 7.200 Rpm 16Mb

- PSU: NOX APEX 700W MODULAR

- Pioneer Dual Layer burner


- Fan Controller 1: LAMPTRON FC-2

- Fan Controller 2 + Temp: AEROCOOL Touch-1000


- FAN:

3 X : AKASA VIPER 120mm Super Silent
600/1900 RPM - 6,9/28,9 dba - 12V - 4 Pin

1 X : COOLER MASTER EXCALIBUR 120mm
600/2000 RPM - 13/30 dba - 12V - 4 Pin


- MODDING LIGHTS :

2 x 30cm REVOLTEC UV
2 x 30cm REVOLTEC UV White
4 x 10cm REVOLTEV UV White


- - - LIQUID COOLING - - -

- PUMP : EK Waterblocks EK-DCP 4.0 800 L/H

- RADIATOR : MAGICOOL 240 Slim 2 x 120mm

- RESERVOIR : PHOBYA Balancer 150

- Waterblock CPU : EK Waterblocks EK- Supreme LT - Plexy + Rame

- Waterblock Chipset : EK Waterblocks EK-NB/SB S - Plexy + Rame

- Waterblock GPU : WATERCOOL HEATKILLER GPU-X3 GTX 560 "Hole Edition"

- TUBE : MasterKleer UV Yellow 16/13mm

- LIQUID : EKWaterblocks EKoolant UV Lime Green

- FITTINGS : EKWaterblocks+AquaTuning+Koolance



Some Box...











Now some assemble work...

Ok post pictures of some assembling hardware..

MOBO and Cpu Waterblock from EK..






Now the X58 Chipset Waterblock from EK..





The Final result in the X-Predator Case..

Hi guys moment for another update..

First i show you the Aerocool X-Predator case "nude version"





Next i mount the fan in the radiator..



Next the radiator inside the case..





Next step is find the pump right position



Next install the Psu and some cable managment..




Ok..in the next update will see some liquid tubing work..

Tell me what you think guys..
Thanx nicolas

Thanx guys..

For the Chipset cooling,the temperatore of chipset is very high,55°/60° whit normal dissipation..Whit the EK SB Waterblock the temp. is under 45°,much better..
I have one Gtx 560 Ti and the loop of tubing is perfect,i think is possibile run a loop whit 2 Gpu,whit a little bit complicate loop..
when i upload other pictures i show you better what im talking about..

"Tomorrow next episode..."

N problem man.. i like see other build whit same case..

Hi guys time for another update..i show you how i make my watercooling tubing loop..

First i do some cable managment,and i connect the Temperature Sensor in Cpu-GPU-CHIPSET

Some pictures from this hard and long work..










..ok now i put my graphics card inside, Nvidia Gtx 560 Ti Amp edition By ZOTAC,Liquid cooled whit WATERCOOL Full waterblock for Gtx 560








I start to connect the Cpu WB to Gpu WB..




..and the GPU WB to the Chipset WB



..in the next photo series i connect all the tubing in the loop..

The GPU WB to CHIPSET WB - The CHIPSET WB direct to Radiator - Out the Radiator going in the Reservoir - OUT the reservoir Back to the PUMP - OUT PUMP inside the CPU WB..and the loop is made..












When the loop is done is moment to take my new OCZ SSD AGLITY 3 120gb and mount inside the Build..

I made some brackets for the SSD to mount it close to the Motherboard,i think is the perfect position..





this is the final result in the build..







Ok in the next update i finish the internal of the buil,and show you other photo and details of complete build,inside and outside..

Appearance comments and questions if you have..

Right now in Italy is night and tomorrow i go to work..i need sleeping..so Goodnight guys..

Hi guys in this post i show you the internale finish and details of my build.. i hope you like it.. !!!

FIrst i show you the External finish details...
The only mod i made is the weel for better mouvment..










This is the internal details..














...in the next post i show you the internal buld whit light in the dark..