C-BonizeD DangerDen acrylictubes!

Let go!

Put the case onto the Carbon vinyl


Cut everything out


Stick it!


Thnks to L3P i had some black assortiment of inbusses :rock:


Finished!












Tried something original with the Window panel





Better pics in Daylight.










Bought some random hardware

New:
OCZ OCZSSD2-2VTXE120G, voor die 60 euro


Used
Mobo en Cpu

Asus Rog maximus 3


Intel 875K


Carbonize the cpu block till i can afford a identical plexi one


mobo with memory build:)








Testfit in the case, getting cramped already




I have some little room left


With sidepanel


positioned the Dual pump and drilled the holes for it.




Bought at my local plumber store 2 metre of acrylic tubing.


First try:)


My working bench

Heat it up, hold it inplace, take a sprint to kitchen and cool it down, mission succesfull!






Bp C47 where in the mail, gladly !:


Same as the SSD!


Prepared the tubing for the fittings, Just like Kier does, grind a 8mm edge.







Then i used speedhack! lol, i forgt to make shots of the buildup progress













I dont have budget for the sleeving, maybe next month


Because there is no room between panel and mobotray, i need to route everything between the mobo and the mobopanel, but it worked
















Some what clearer pics taken with a handycam
not allot of tekst, just better pics

Did some random sleeving, put 24/gpu extenders, black SATA cable and much better cablemanagement





























Also did a boot


Soo, its quite done now, The system is up and running smoothly after some flaws,

First, because the solid tubing didnt expand to pick up the pressure what was left behind when u turn the system off i had some minor leaks, after a little chat Peter(l3p) came with an idea, that was to make a kind of balance line of 1/2tubing, so i made it like he suggested, and damn it worked, was a miracle! its running real smoothly now, Gladly

Piics

So basicly i connected a 50cm piece of tygon 1/2 tubing, used that ass fill and bleed port(connected to highest reservoir port) and that sorted my pressure fails.

Acrylic tubing can not expand to pressure into the loop i had with 2 mcp355 pumps, after ataching the tygon tybing i had that sorted.
Edited by k.3nny - 11/4/12 at 11:19am

Little update

started sleeving SSD part:D!

The tubing costs 10 euro for 2 meter.

I choose this route to get 2 long straight lines because i tried both options but liked this one more.

Here some pics

The 2 trouble makers

When spinning up no problems at all but when u turn them off The fluids stops, u create a vacuum pressure something ish



The Line that can take all the pressure and fill line and bleed line









I hope it wil be clearer about that

I made the line rougly inshape, them measure everything, and cut in with 5mm each time i cut it with a angle saw


Edited by k.3nny - 11/4/12 at 12:30pm

Because u need to File the Acrilyc tubing to 12mm and copper plumbers piping is 12mm from origin! so u have no weak spots ^^

And this loop is only 300ML With 2x mcp355 can u imagine