I have a little bit of a problem. I spent friday in my attic laying down cat5e to rooms. Today i've connected it all and 2 of the rooms are only running at fast ethernet speeds. I've tested all the cables individually and i think i've found the problem.
The layout goes: router --> switch --> attic cat5e --> switch --> computers. Do i need a crossover cable between the 2 switches? They're cheap tplink 5 port umanaged gigabit switches? ATM every cable is wired straight though 568B (white orange, orange, white green, blue, white blue, green, white brown, brown).
To test this i plugged the back of my computer into a 50m cat5e and bypassed the first switch and plugged it straight into the second switch near the router, and it works at gigabit.
TLDR I didn't research before laying cable. I need your help.
The layout goes: router --> switch --> attic cat5e --> switch --> computers. Do i need a crossover cable between the 2 switches? They're cheap tplink 5 port umanaged gigabit switches? ATM every cable is wired straight though 568B (white orange, orange, white green, blue, white blue, green, white brown, brown).
To test this i plugged the back of my computer into a 50m cat5e and bypassed the first switch and plugged it straight into the second switch near the router, and it works at gigabit.
TLDR I didn't research before laying cable. I need your help.







That's what you said you were going to do anyway hahaha.