Overclock.net › Forums › AMD › AMD CPUs › Fixing Broken Pins - Phenom 955
New Posts  All Forums:Forum Nav:

Fixing Broken Pins - Phenom 955 - Page 8

post #71 of 134
Thread Starter 
I'll report that to you eventually.

Just had a freeze in 1 hour with raised cpu voltage to 1.312+1.488vcore with the overvolted/clocked cpunb, ram.

I've been running cpu-nb-vid at 1.2v, not 1.250 like you said jason. 1.2vid turns out to be 1.261-1.281 in cpu-nb-voltage though.

It's possible this chip simply isn't stable at 3.7ghz. I mean I could pass 10 passes with my athlon ii x4 at like 3.7ghz but to be 24 stable i had to bring it down to a measly 3.4ghz, making it only overclock 200 mhz (i did unlock a core on it though). 10 passes on ibt with this chip is easy though.

I think I might figure out my rock solid 24 prime95 stable overclock on this chip and on what voltage, and simply raise it by 200 mhz for usage. or something.
Build In Progress
(17 items)
 
   
CPUMotherboardGraphicsRAM
Haswell i7-4770K 4.8GHz@1.452v/1.97vRIN Gigabyte Z87X-UD3H Older Gigabyte 7950 (H60 Mod) 2x4GB Gskill 2400CL11 Hynix CFRs 
Hard DriveCoolingOSMonitor
Samsung 830 128gb Corsair H110 w/4x 140mm Yate Loon High Blues W7 x64 Ultimate Yarrgh Matey Dell U2312HM Matte IPS 1080p 
MonitorMonitorKeyboardPower
Sanyo DP19640 18.5" 768p KDS Rad-7xp 1024p CM Storm Quickfire Rapids Brown Rosewill Capstone 750 
CaseMouseMouse PadAudio
Bitfenix Shinobi Modded CM Storm Spawn Steelseries Diablo 3 2 set CD Speaker + Big Sub 
Other
Bitfenix Recon Fan Controller Moded 
CPUMotherboardGraphicsRAM
Delidded i7-3770K 5GHz@1.499 Gigabyte Z77X-UD5H 1.1 Sapphire Dual-X 7950 3L Boost 4x2GB Mushkin Ridgeback 2200mhz 8/11/8/27 1.75v... 
Hard DriveCoolingCoolingCooling
Intel X25-M 80GB SSD NH-D14 SE2011 Noctua 120/140/140 Fans 3 x Yate Loon Mediums (Petras) 2 x NZXT Havik 140mm Fans 
OSMonitorMonitorKeyboard
Hax'd W7 Ultimate 64-bit Sanyo DP19640 19'' KDS Radius Rad-7xp 17'' Ducky 1087 MX Brown 10keyless 
PowerCaseMouseMouse Pad
Rosewill Capstone 550w Modular NZXT Source 210 w/Modded Window Razer Deathadder 3.5G Steelseries Blizzcon D3 
AudioAudioOtherOther
Phillips FW-C250 2 Speaker Set w/3 CD Changer JBL Sub 6 Subwoofer NZXT Sleeved LED Strip 1m Blue NZXT Sentry 2 Fan Controller 
Other
Colonial Blue Paracord Sleeving 
CPUMotherboardGraphicsRAM
Phenom ii X4 955C2, $31, 5 broken pins, works! ... Biostar A770e3 6.3 Red&Black MSI GTX 460 768mb Twin Frozr II 2 x 2GB Kingston HyperX 1333 OC to 1348CL7@1.65v 
Hard DriveCoolingCoolingCooling
Intel X25-M G2 80GB SSD NH-D14 SE2011 6 x Case Fans (4 x YL-M, NZXT case fan, CM Hype... Jerryrigged Chipset-Northbridge 80mm HSF 
CoolingOSMonitorKeyboard
Jerryrigged VRM Heatsink (sawed off stock AM2 h... Hax'd W7 Ultimate 64bit Sanyo DP19640 19"1360x768 Ducky Cherry Browns 10keyless 
PowerCaseMouseMouse Pad
Antec Earthwatts 430D NZXT Gamma Steelseries Kinzu Optical Steelseries Blizzcon Diablo 3 
  hide details  
Reply
Build In Progress
(17 items)
 
   
CPUMotherboardGraphicsRAM
Haswell i7-4770K 4.8GHz@1.452v/1.97vRIN Gigabyte Z87X-UD3H Older Gigabyte 7950 (H60 Mod) 2x4GB Gskill 2400CL11 Hynix CFRs 
Hard DriveCoolingOSMonitor
Samsung 830 128gb Corsair H110 w/4x 140mm Yate Loon High Blues W7 x64 Ultimate Yarrgh Matey Dell U2312HM Matte IPS 1080p 
MonitorMonitorKeyboardPower
Sanyo DP19640 18.5" 768p KDS Rad-7xp 1024p CM Storm Quickfire Rapids Brown Rosewill Capstone 750 
CaseMouseMouse PadAudio
Bitfenix Shinobi Modded CM Storm Spawn Steelseries Diablo 3 2 set CD Speaker + Big Sub 
Other
Bitfenix Recon Fan Controller Moded 
CPUMotherboardGraphicsRAM
Delidded i7-3770K 5GHz@1.499 Gigabyte Z77X-UD5H 1.1 Sapphire Dual-X 7950 3L Boost 4x2GB Mushkin Ridgeback 2200mhz 8/11/8/27 1.75v... 
Hard DriveCoolingCoolingCooling
Intel X25-M 80GB SSD NH-D14 SE2011 Noctua 120/140/140 Fans 3 x Yate Loon Mediums (Petras) 2 x NZXT Havik 140mm Fans 
OSMonitorMonitorKeyboard
Hax'd W7 Ultimate 64-bit Sanyo DP19640 19'' KDS Radius Rad-7xp 17'' Ducky 1087 MX Brown 10keyless 
PowerCaseMouseMouse Pad
Rosewill Capstone 550w Modular NZXT Source 210 w/Modded Window Razer Deathadder 3.5G Steelseries Blizzcon D3 
AudioAudioOtherOther
Phillips FW-C250 2 Speaker Set w/3 CD Changer JBL Sub 6 Subwoofer NZXT Sleeved LED Strip 1m Blue NZXT Sentry 2 Fan Controller 
Other
Colonial Blue Paracord Sleeving 
CPUMotherboardGraphicsRAM
Phenom ii X4 955C2, $31, 5 broken pins, works! ... Biostar A770e3 6.3 Red&Black MSI GTX 460 768mb Twin Frozr II 2 x 2GB Kingston HyperX 1333 OC to 1348CL7@1.65v 
Hard DriveCoolingCoolingCooling
Intel X25-M G2 80GB SSD NH-D14 SE2011 6 x Case Fans (4 x YL-M, NZXT case fan, CM Hype... Jerryrigged Chipset-Northbridge 80mm HSF 
CoolingOSMonitorKeyboard
Jerryrigged VRM Heatsink (sawed off stock AM2 h... Hax'd W7 Ultimate 64bit Sanyo DP19640 19"1360x768 Ducky Cherry Browns 10keyless 
PowerCaseMouseMouse Pad
Antec Earthwatts 430D NZXT Gamma Steelseries Kinzu Optical Steelseries Blizzcon Diablo 3 
  hide details  
Reply
post #72 of 134
Quote:
Originally Posted by Belial View Post

I'll report that to you eventually.
Just had a freeze in 1 hour with raised cpu voltage to 1.312+1.488vcore with the overvolted/clocked cpunb, ram.
I've been running cpu-nb-vid at 1.2v, not 1.250 like you said jason. 1.2vid turns out to be 1.261-1.281 in cpu-nb-voltage though.
It's possible this chip simply isn't stable at 3.7ghz. I mean I could pass 10 passes with my athlon ii x4 at like 3.7ghz but to be 24 stable i had to bring it down to a measly 3.4ghz, making it only overclock 200 mhz (i did unlock a core on it though). 10 passes on ibt with this chip is easy though.
I think I might figure out my rock solid 24 prime95 stable overclock on this chip and on what voltage, and simply raise it by 200 mhz for usage. or something.
If you do run it at 3.4Ghz then increase the cpu nb frequency to somewhere around 2600mhz.
Jay
(13 items)
 
  
CPUMotherboardGraphicsRAM
FX 8350 4.4Ghz at 1.36v GA 78LMT USB3 Rev 5.0 Sapphire R9 285 OC 16GB Kingston Savage Ram 
Hard DriveHard DriveCoolingOS
1TB Western Digital 500GB Seagate Barracuda Noctua NH-D15S Windows 8.1 
MonitorPowerMouseMouse Pad
Asus MG279Q Fressync OCZ ZS 650 Watt PSU Dragonwar ELE-G9 Dragonwar 
  hide details  
Reply
Jay
(13 items)
 
  
CPUMotherboardGraphicsRAM
FX 8350 4.4Ghz at 1.36v GA 78LMT USB3 Rev 5.0 Sapphire R9 285 OC 16GB Kingston Savage Ram 
Hard DriveHard DriveCoolingOS
1TB Western Digital 500GB Seagate Barracuda Noctua NH-D15S Windows 8.1 
MonitorPowerMouseMouse Pad
Asus MG279Q Fressync OCZ ZS 650 Watt PSU Dragonwar ELE-G9 Dragonwar 
  hide details  
Reply
post #73 of 134
Thread Starter 
I've been running CPu-NB frequency at 2400mhz, and 1.2vid (about 1.26+ voltage i believe it comes out to).

I think just 3.7ghz isn't 24 hour stable. To be honest, I think all those people that say their phenom ii x4 955 c2 revision is 3.6+ ghz stable are just full of ****, they aren't 24 hour prime95 stable, they are 2 hours prime stable or 10 minutes stable or IBT stable, which is a lot easier than prime95 24 hour stable. This chip is easily 10 runs IBT or 2 hours prime95 stable at 3.9ghz.

That, or something completely wild is what is holding me back. I've been testing generally around 1.456-1.568 vcore, if like 1.6vcore extreme volts or 1.4 very low volts was what i need, then i woudln't know it.

Just going to test 3.6 ghz at 1.325+.2v=1.456vcore, cpu-nb at 2400mhz/1.2vid, ram at 1.65v.
Build In Progress
(17 items)
 
   
CPUMotherboardGraphicsRAM
Haswell i7-4770K 4.8GHz@1.452v/1.97vRIN Gigabyte Z87X-UD3H Older Gigabyte 7950 (H60 Mod) 2x4GB Gskill 2400CL11 Hynix CFRs 
Hard DriveCoolingOSMonitor
Samsung 830 128gb Corsair H110 w/4x 140mm Yate Loon High Blues W7 x64 Ultimate Yarrgh Matey Dell U2312HM Matte IPS 1080p 
MonitorMonitorKeyboardPower
Sanyo DP19640 18.5" 768p KDS Rad-7xp 1024p CM Storm Quickfire Rapids Brown Rosewill Capstone 750 
CaseMouseMouse PadAudio
Bitfenix Shinobi Modded CM Storm Spawn Steelseries Diablo 3 2 set CD Speaker + Big Sub 
Other
Bitfenix Recon Fan Controller Moded 
CPUMotherboardGraphicsRAM
Delidded i7-3770K 5GHz@1.499 Gigabyte Z77X-UD5H 1.1 Sapphire Dual-X 7950 3L Boost 4x2GB Mushkin Ridgeback 2200mhz 8/11/8/27 1.75v... 
Hard DriveCoolingCoolingCooling
Intel X25-M 80GB SSD NH-D14 SE2011 Noctua 120/140/140 Fans 3 x Yate Loon Mediums (Petras) 2 x NZXT Havik 140mm Fans 
OSMonitorMonitorKeyboard
Hax'd W7 Ultimate 64-bit Sanyo DP19640 19'' KDS Radius Rad-7xp 17'' Ducky 1087 MX Brown 10keyless 
PowerCaseMouseMouse Pad
Rosewill Capstone 550w Modular NZXT Source 210 w/Modded Window Razer Deathadder 3.5G Steelseries Blizzcon D3 
AudioAudioOtherOther
Phillips FW-C250 2 Speaker Set w/3 CD Changer JBL Sub 6 Subwoofer NZXT Sleeved LED Strip 1m Blue NZXT Sentry 2 Fan Controller 
Other
Colonial Blue Paracord Sleeving 
CPUMotherboardGraphicsRAM
Phenom ii X4 955C2, $31, 5 broken pins, works! ... Biostar A770e3 6.3 Red&Black MSI GTX 460 768mb Twin Frozr II 2 x 2GB Kingston HyperX 1333 OC to 1348CL7@1.65v 
Hard DriveCoolingCoolingCooling
Intel X25-M G2 80GB SSD NH-D14 SE2011 6 x Case Fans (4 x YL-M, NZXT case fan, CM Hype... Jerryrigged Chipset-Northbridge 80mm HSF 
CoolingOSMonitorKeyboard
Jerryrigged VRM Heatsink (sawed off stock AM2 h... Hax'd W7 Ultimate 64bit Sanyo DP19640 19"1360x768 Ducky Cherry Browns 10keyless 
PowerCaseMouseMouse Pad
Antec Earthwatts 430D NZXT Gamma Steelseries Kinzu Optical Steelseries Blizzcon Diablo 3 
  hide details  
Reply
Build In Progress
(17 items)
 
   
CPUMotherboardGraphicsRAM
Haswell i7-4770K 4.8GHz@1.452v/1.97vRIN Gigabyte Z87X-UD3H Older Gigabyte 7950 (H60 Mod) 2x4GB Gskill 2400CL11 Hynix CFRs 
Hard DriveCoolingOSMonitor
Samsung 830 128gb Corsair H110 w/4x 140mm Yate Loon High Blues W7 x64 Ultimate Yarrgh Matey Dell U2312HM Matte IPS 1080p 
MonitorMonitorKeyboardPower
Sanyo DP19640 18.5" 768p KDS Rad-7xp 1024p CM Storm Quickfire Rapids Brown Rosewill Capstone 750 
CaseMouseMouse PadAudio
Bitfenix Shinobi Modded CM Storm Spawn Steelseries Diablo 3 2 set CD Speaker + Big Sub 
Other
Bitfenix Recon Fan Controller Moded 
CPUMotherboardGraphicsRAM
Delidded i7-3770K 5GHz@1.499 Gigabyte Z77X-UD5H 1.1 Sapphire Dual-X 7950 3L Boost 4x2GB Mushkin Ridgeback 2200mhz 8/11/8/27 1.75v... 
Hard DriveCoolingCoolingCooling
Intel X25-M 80GB SSD NH-D14 SE2011 Noctua 120/140/140 Fans 3 x Yate Loon Mediums (Petras) 2 x NZXT Havik 140mm Fans 
OSMonitorMonitorKeyboard
Hax'd W7 Ultimate 64-bit Sanyo DP19640 19'' KDS Radius Rad-7xp 17'' Ducky 1087 MX Brown 10keyless 
PowerCaseMouseMouse Pad
Rosewill Capstone 550w Modular NZXT Source 210 w/Modded Window Razer Deathadder 3.5G Steelseries Blizzcon D3 
AudioAudioOtherOther
Phillips FW-C250 2 Speaker Set w/3 CD Changer JBL Sub 6 Subwoofer NZXT Sleeved LED Strip 1m Blue NZXT Sentry 2 Fan Controller 
Other
Colonial Blue Paracord Sleeving 
CPUMotherboardGraphicsRAM
Phenom ii X4 955C2, $31, 5 broken pins, works! ... Biostar A770e3 6.3 Red&Black MSI GTX 460 768mb Twin Frozr II 2 x 2GB Kingston HyperX 1333 OC to 1348CL7@1.65v 
Hard DriveCoolingCoolingCooling
Intel X25-M G2 80GB SSD NH-D14 SE2011 6 x Case Fans (4 x YL-M, NZXT case fan, CM Hype... Jerryrigged Chipset-Northbridge 80mm HSF 
CoolingOSMonitorKeyboard
Jerryrigged VRM Heatsink (sawed off stock AM2 h... Hax'd W7 Ultimate 64bit Sanyo DP19640 19"1360x768 Ducky Cherry Browns 10keyless 
PowerCaseMouseMouse Pad
Antec Earthwatts 430D NZXT Gamma Steelseries Kinzu Optical Steelseries Blizzcon Diablo 3 
  hide details  
Reply
post #74 of 134
Quote:
Originally Posted by Belial View Post

I've been running CPu-NB frequency at 2400mhz, and 1.2vid (about 1.26+ voltage i believe it comes out to).
I think just 3.7ghz isn't 24 hour stable. To be honest, I think all those people that say their phenom ii x4 955 c2 revision is 3.6+ ghz stable are just full of ****, they aren't 24 hour prime95 stable, they are 2 hours prime stable or 10 minutes stable or IBT stable, which is a lot easier than prime95 24 hour stable. This chip is easily 10 runs IBT or 2 hours prime95 stable at 3.9ghz.
That, or something completely wild is what is holding me back. I've been testing generally around 1.456-1.568 vcore, if like 1.6vcore extreme volts or 1.4 very low volts was what i need, then i woudln't know it.
Just going to test 3.6 ghz at 1.325+.2v=1.456vcore, cpu-nb at 2400mhz/1.2vid, ram at 1.65v.
You do not need 24hrs p95. Do you fold?
Jay
(13 items)
 
  
CPUMotherboardGraphicsRAM
FX 8350 4.4Ghz at 1.36v GA 78LMT USB3 Rev 5.0 Sapphire R9 285 OC 16GB Kingston Savage Ram 
Hard DriveHard DriveCoolingOS
1TB Western Digital 500GB Seagate Barracuda Noctua NH-D15S Windows 8.1 
MonitorPowerMouseMouse Pad
Asus MG279Q Fressync OCZ ZS 650 Watt PSU Dragonwar ELE-G9 Dragonwar 
  hide details  
Reply
Jay
(13 items)
 
  
CPUMotherboardGraphicsRAM
FX 8350 4.4Ghz at 1.36v GA 78LMT USB3 Rev 5.0 Sapphire R9 285 OC 16GB Kingston Savage Ram 
Hard DriveHard DriveCoolingOS
1TB Western Digital 500GB Seagate Barracuda Noctua NH-D15S Windows 8.1 
MonitorPowerMouseMouse Pad
Asus MG279Q Fressync OCZ ZS 650 Watt PSU Dragonwar ELE-G9 Dragonwar 
  hide details  
Reply
post #75 of 134
Thread Starter 
4 hours Freeze at:

1.2875+.2v=1.456 vcore
3.6ghz
2400NB@1.2vid
Ram@1.616vdimm (1.65 in bios) stock settings (cl9)

Compare to my most successful run, 8 hours prime95:
1.2875+.2v=1.456vcore
3.7ghz
2400NB@1.2vid
Ram@1.616vdimm but CL7 (ive tested its overclock to 1348mhz@cl7 prime95 24 hour, but this was 2 years ago).

I am truly confused on why Im having such a hard time here, unless my CPU is just like max prime95 stable only at 3.4ghz or something really low like that (then again, my athlon ii could get like 3.8+ghz but only 3.4 at prime95 24 hour stable). The real pain is that there doesnt seem to be a correlation to anything, increased or decreased clocks, voltages, nb voltage or speed, does nothing to make the system pass more or less. Its just fail fail fail, sometimes longer or shorter, but fail.

Unless it was just super important that I ran at CL7 instead of CL9, but i dont think that having your ram not overclocked would cause instability...
Quote:
You do not need 24hrs p95. Do you fold?

No, I don't need 24 hours prime95, and no, i dont fold, but I'd like to at least know what prime95 24 hours stable is for my chip. Like I said, I can easily pass 10+ runs of IBT or 2+ hours of prime95 on as high as 3.9ghz, maybe 4ghz if I really pushed it.

I mean, we all know the problems of not having a completely rock solid system - errors get written down, after a few months (?) **** just starts to crash and not work and collectively the errors have built up and cause problems, perhaps enough so that you need to reinstall.

I have no critical data, this is just a general usage/video encoding (and i dont care to save the stuff, I stream me playing starcraft 2 to justintv)/gaming computer. But I want a smooth running computer.

Or, at least, I will run an unstable overclock with mad gigas on this computer, but I want to at least know what prime95 24 hours stable is on this chip so I know my baseline, how much to push it, maybe what voltages and whatnot would be best.

It's just irritating. I want to know what my prime95 24 hours stable is!

I'm just going to run again at 3.5ghz. I'll keep it at the same voltage i guess. if that fails maybe it'll show that it's volts being too high or something i dont know im confused.

I wish I could know what other people got on their c2 phenoms with prime95 24 hour stable. The problem is everyone says 'stable' but they just mean like 10 minutes of prime95, not the golden accepted standard, 24 hours, or at least 12 hours, or hell just a single pass of every fft length at 15 minutes (like 13 hours? forgot how long that is, something like 10+ hours). I read a lot of people say dumb things like "well i cant make prime95 work so i tested ibt" and its like duh, because your **** isnt rock stable numbnuts. And I've had plenty of prime95 runs fail on hours 12-24, many many times hen i was tuning my athlon ii x3.
Build In Progress
(17 items)
 
   
CPUMotherboardGraphicsRAM
Haswell i7-4770K 4.8GHz@1.452v/1.97vRIN Gigabyte Z87X-UD3H Older Gigabyte 7950 (H60 Mod) 2x4GB Gskill 2400CL11 Hynix CFRs 
Hard DriveCoolingOSMonitor
Samsung 830 128gb Corsair H110 w/4x 140mm Yate Loon High Blues W7 x64 Ultimate Yarrgh Matey Dell U2312HM Matte IPS 1080p 
MonitorMonitorKeyboardPower
Sanyo DP19640 18.5" 768p KDS Rad-7xp 1024p CM Storm Quickfire Rapids Brown Rosewill Capstone 750 
CaseMouseMouse PadAudio
Bitfenix Shinobi Modded CM Storm Spawn Steelseries Diablo 3 2 set CD Speaker + Big Sub 
Other
Bitfenix Recon Fan Controller Moded 
CPUMotherboardGraphicsRAM
Delidded i7-3770K 5GHz@1.499 Gigabyte Z77X-UD5H 1.1 Sapphire Dual-X 7950 3L Boost 4x2GB Mushkin Ridgeback 2200mhz 8/11/8/27 1.75v... 
Hard DriveCoolingCoolingCooling
Intel X25-M 80GB SSD NH-D14 SE2011 Noctua 120/140/140 Fans 3 x Yate Loon Mediums (Petras) 2 x NZXT Havik 140mm Fans 
OSMonitorMonitorKeyboard
Hax'd W7 Ultimate 64-bit Sanyo DP19640 19'' KDS Radius Rad-7xp 17'' Ducky 1087 MX Brown 10keyless 
PowerCaseMouseMouse Pad
Rosewill Capstone 550w Modular NZXT Source 210 w/Modded Window Razer Deathadder 3.5G Steelseries Blizzcon D3 
AudioAudioOtherOther
Phillips FW-C250 2 Speaker Set w/3 CD Changer JBL Sub 6 Subwoofer NZXT Sleeved LED Strip 1m Blue NZXT Sentry 2 Fan Controller 
Other
Colonial Blue Paracord Sleeving 
CPUMotherboardGraphicsRAM
Phenom ii X4 955C2, $31, 5 broken pins, works! ... Biostar A770e3 6.3 Red&Black MSI GTX 460 768mb Twin Frozr II 2 x 2GB Kingston HyperX 1333 OC to 1348CL7@1.65v 
Hard DriveCoolingCoolingCooling
Intel X25-M G2 80GB SSD NH-D14 SE2011 6 x Case Fans (4 x YL-M, NZXT case fan, CM Hype... Jerryrigged Chipset-Northbridge 80mm HSF 
CoolingOSMonitorKeyboard
Jerryrigged VRM Heatsink (sawed off stock AM2 h... Hax'd W7 Ultimate 64bit Sanyo DP19640 19"1360x768 Ducky Cherry Browns 10keyless 
PowerCaseMouseMouse Pad
Antec Earthwatts 430D NZXT Gamma Steelseries Kinzu Optical Steelseries Blizzcon Diablo 3 
  hide details  
Reply
Build In Progress
(17 items)
 
   
CPUMotherboardGraphicsRAM
Haswell i7-4770K 4.8GHz@1.452v/1.97vRIN Gigabyte Z87X-UD3H Older Gigabyte 7950 (H60 Mod) 2x4GB Gskill 2400CL11 Hynix CFRs 
Hard DriveCoolingOSMonitor
Samsung 830 128gb Corsair H110 w/4x 140mm Yate Loon High Blues W7 x64 Ultimate Yarrgh Matey Dell U2312HM Matte IPS 1080p 
MonitorMonitorKeyboardPower
Sanyo DP19640 18.5" 768p KDS Rad-7xp 1024p CM Storm Quickfire Rapids Brown Rosewill Capstone 750 
CaseMouseMouse PadAudio
Bitfenix Shinobi Modded CM Storm Spawn Steelseries Diablo 3 2 set CD Speaker + Big Sub 
Other
Bitfenix Recon Fan Controller Moded 
CPUMotherboardGraphicsRAM
Delidded i7-3770K 5GHz@1.499 Gigabyte Z77X-UD5H 1.1 Sapphire Dual-X 7950 3L Boost 4x2GB Mushkin Ridgeback 2200mhz 8/11/8/27 1.75v... 
Hard DriveCoolingCoolingCooling
Intel X25-M 80GB SSD NH-D14 SE2011 Noctua 120/140/140 Fans 3 x Yate Loon Mediums (Petras) 2 x NZXT Havik 140mm Fans 
OSMonitorMonitorKeyboard
Hax'd W7 Ultimate 64-bit Sanyo DP19640 19'' KDS Radius Rad-7xp 17'' Ducky 1087 MX Brown 10keyless 
PowerCaseMouseMouse Pad
Rosewill Capstone 550w Modular NZXT Source 210 w/Modded Window Razer Deathadder 3.5G Steelseries Blizzcon D3 
AudioAudioOtherOther
Phillips FW-C250 2 Speaker Set w/3 CD Changer JBL Sub 6 Subwoofer NZXT Sleeved LED Strip 1m Blue NZXT Sentry 2 Fan Controller 
Other
Colonial Blue Paracord Sleeving 
CPUMotherboardGraphicsRAM
Phenom ii X4 955C2, $31, 5 broken pins, works! ... Biostar A770e3 6.3 Red&Black MSI GTX 460 768mb Twin Frozr II 2 x 2GB Kingston HyperX 1333 OC to 1348CL7@1.65v 
Hard DriveCoolingCoolingCooling
Intel X25-M G2 80GB SSD NH-D14 SE2011 6 x Case Fans (4 x YL-M, NZXT case fan, CM Hype... Jerryrigged Chipset-Northbridge 80mm HSF 
CoolingOSMonitorKeyboard
Jerryrigged VRM Heatsink (sawed off stock AM2 h... Hax'd W7 Ultimate 64bit Sanyo DP19640 19"1360x768 Ducky Cherry Browns 10keyless 
PowerCaseMouseMouse Pad
Antec Earthwatts 430D NZXT Gamma Steelseries Kinzu Optical Steelseries Blizzcon Diablo 3 
  hide details  
Reply
post #76 of 134
Quote:
Originally Posted by Belial View Post

4 hours Freeze at:
1.2875+.2v=1.456 vcore
3.6ghz
2400NB@1.2vid
Ram@1.616vdimm (1.65 in bios) stock settings (cl9)
Compare to my most successful run, 8 hours prime95:
1.2875+.2v=1.456vcore
3.7ghz
2400NB@1.2vid
Ram@1.616vdimm but CL7 (ive tested its overclock to 1348mhz@cl7 prime95 24 hour, but this was 2 years ago).
I am truly confused on why Im having such a hard time here, unless my CPU is just like max prime95 stable only at 3.4ghz or something really low like that (then again, my athlon ii could get like 3.8+ghz but only 3.4 at prime95 24 hour stable). The real pain is that there doesnt seem to be a correlation to anything, increased or decreased clocks, voltages, nb voltage or speed, does nothing to make the system pass more or less. Its just fail fail fail, sometimes longer or shorter, but fail.
Unless it was just super important that I ran at CL7 instead of CL9, but i dont think that having your ram not overclocked would cause instability...
No, I don't need 24 hours prime95, and no, i dont fold, but I'd like to at least know what prime95 24 hours stable is for my chip. Like I said, I can easily pass 10+ runs of IBT or 2+ hours of prime95 on as high as 3.9ghz, maybe 4ghz if I really pushed it.
I mean, we all know the problems of not having a completely rock solid system - errors get written down, after a few months (?) **** just starts to crash and not work and collectively the errors have built up and cause problems, perhaps enough so that you need to reinstall.
I have no critical data, this is just a general usage/video encoding (and i dont care to save the stuff, I stream me playing starcraft 2 to justintv)/gaming computer. But I want a smooth running computer.
Or, at least, I will run an unstable overclock with mad gigas on this computer, but I want to at least know what prime95 24 hours stable is on this chip so I know my baseline, how much to push it, maybe what voltages and whatnot would be best.
It's just irritating. I want to know what my prime95 24 hours stable is!
I'm just going to run again at 3.5ghz. I'll keep it at the same voltage i guess. if that fails maybe it'll show that it's volts being too high or something i dont know im confused.
I wish I could know what other people got on their c2 phenoms with prime95 24 hour stable. The problem is everyone says 'stable' but they just mean like 10 minutes of prime95, not the golden accepted standard, 24 hours, or at least 12 hours, or hell just a single pass of every fft length at 15 minutes (like 13 hours? forgot how long that is, something like 10+ hours). I read a lot of people say dumb things like "well i cant make prime95 work so i tested ibt" and its like duh, because your **** isnt rock stable numbnuts. And I've had plenty of prime95 runs fail on hours 12-24, many many times hen i was tuning my athlon ii x3.

Till now i haven't come across anybody with any chip who has had a 24hr run of p95.
Jay
(13 items)
 
  
CPUMotherboardGraphicsRAM
FX 8350 4.4Ghz at 1.36v GA 78LMT USB3 Rev 5.0 Sapphire R9 285 OC 16GB Kingston Savage Ram 
Hard DriveHard DriveCoolingOS
1TB Western Digital 500GB Seagate Barracuda Noctua NH-D15S Windows 8.1 
MonitorPowerMouseMouse Pad
Asus MG279Q Fressync OCZ ZS 650 Watt PSU Dragonwar ELE-G9 Dragonwar 
  hide details  
Reply
Jay
(13 items)
 
  
CPUMotherboardGraphicsRAM
FX 8350 4.4Ghz at 1.36v GA 78LMT USB3 Rev 5.0 Sapphire R9 285 OC 16GB Kingston Savage Ram 
Hard DriveHard DriveCoolingOS
1TB Western Digital 500GB Seagate Barracuda Noctua NH-D15S Windows 8.1 
MonitorPowerMouseMouse Pad
Asus MG279Q Fressync OCZ ZS 650 Watt PSU Dragonwar ELE-G9 Dragonwar 
  hide details  
Reply
post #77 of 134
Thread Starter 
My athlon ii x3 3.2ghz @ x4 3.41 ghz was 24 hours stable.

Okay, so if I dont need to do 24 hours stable, I still need some 'benchmark' of some kind.

I'll try 10 runs of IBT as my test, i suppose. Problem with IBT is that it runs so short.... most of the i run ibt, i set priority to 1 and just use the internet at the same time. I guess I should just run ibt 10 runs 'high' on priority 10 while not using the computer ;/

I can get 3.8ghz easy on it. I'll see if i can get 4ghz with it.

so dissapointing tt. I was dissapointed my athlon ii 450 coudl only hit 3.4 ghz though. i think with that at least i was getting like 13+ hours.

I'll just run one more test at 1.456vcore at 3.5ghz. see if that passes.
Build In Progress
(17 items)
 
   
CPUMotherboardGraphicsRAM
Haswell i7-4770K 4.8GHz@1.452v/1.97vRIN Gigabyte Z87X-UD3H Older Gigabyte 7950 (H60 Mod) 2x4GB Gskill 2400CL11 Hynix CFRs 
Hard DriveCoolingOSMonitor
Samsung 830 128gb Corsair H110 w/4x 140mm Yate Loon High Blues W7 x64 Ultimate Yarrgh Matey Dell U2312HM Matte IPS 1080p 
MonitorMonitorKeyboardPower
Sanyo DP19640 18.5" 768p KDS Rad-7xp 1024p CM Storm Quickfire Rapids Brown Rosewill Capstone 750 
CaseMouseMouse PadAudio
Bitfenix Shinobi Modded CM Storm Spawn Steelseries Diablo 3 2 set CD Speaker + Big Sub 
Other
Bitfenix Recon Fan Controller Moded 
CPUMotherboardGraphicsRAM
Delidded i7-3770K 5GHz@1.499 Gigabyte Z77X-UD5H 1.1 Sapphire Dual-X 7950 3L Boost 4x2GB Mushkin Ridgeback 2200mhz 8/11/8/27 1.75v... 
Hard DriveCoolingCoolingCooling
Intel X25-M 80GB SSD NH-D14 SE2011 Noctua 120/140/140 Fans 3 x Yate Loon Mediums (Petras) 2 x NZXT Havik 140mm Fans 
OSMonitorMonitorKeyboard
Hax'd W7 Ultimate 64-bit Sanyo DP19640 19'' KDS Radius Rad-7xp 17'' Ducky 1087 MX Brown 10keyless 
PowerCaseMouseMouse Pad
Rosewill Capstone 550w Modular NZXT Source 210 w/Modded Window Razer Deathadder 3.5G Steelseries Blizzcon D3 
AudioAudioOtherOther
Phillips FW-C250 2 Speaker Set w/3 CD Changer JBL Sub 6 Subwoofer NZXT Sleeved LED Strip 1m Blue NZXT Sentry 2 Fan Controller 
Other
Colonial Blue Paracord Sleeving 
CPUMotherboardGraphicsRAM
Phenom ii X4 955C2, $31, 5 broken pins, works! ... Biostar A770e3 6.3 Red&Black MSI GTX 460 768mb Twin Frozr II 2 x 2GB Kingston HyperX 1333 OC to 1348CL7@1.65v 
Hard DriveCoolingCoolingCooling
Intel X25-M G2 80GB SSD NH-D14 SE2011 6 x Case Fans (4 x YL-M, NZXT case fan, CM Hype... Jerryrigged Chipset-Northbridge 80mm HSF 
CoolingOSMonitorKeyboard
Jerryrigged VRM Heatsink (sawed off stock AM2 h... Hax'd W7 Ultimate 64bit Sanyo DP19640 19"1360x768 Ducky Cherry Browns 10keyless 
PowerCaseMouseMouse Pad
Antec Earthwatts 430D NZXT Gamma Steelseries Kinzu Optical Steelseries Blizzcon Diablo 3 
  hide details  
Reply
Build In Progress
(17 items)
 
   
CPUMotherboardGraphicsRAM
Haswell i7-4770K 4.8GHz@1.452v/1.97vRIN Gigabyte Z87X-UD3H Older Gigabyte 7950 (H60 Mod) 2x4GB Gskill 2400CL11 Hynix CFRs 
Hard DriveCoolingOSMonitor
Samsung 830 128gb Corsair H110 w/4x 140mm Yate Loon High Blues W7 x64 Ultimate Yarrgh Matey Dell U2312HM Matte IPS 1080p 
MonitorMonitorKeyboardPower
Sanyo DP19640 18.5" 768p KDS Rad-7xp 1024p CM Storm Quickfire Rapids Brown Rosewill Capstone 750 
CaseMouseMouse PadAudio
Bitfenix Shinobi Modded CM Storm Spawn Steelseries Diablo 3 2 set CD Speaker + Big Sub 
Other
Bitfenix Recon Fan Controller Moded 
CPUMotherboardGraphicsRAM
Delidded i7-3770K 5GHz@1.499 Gigabyte Z77X-UD5H 1.1 Sapphire Dual-X 7950 3L Boost 4x2GB Mushkin Ridgeback 2200mhz 8/11/8/27 1.75v... 
Hard DriveCoolingCoolingCooling
Intel X25-M 80GB SSD NH-D14 SE2011 Noctua 120/140/140 Fans 3 x Yate Loon Mediums (Petras) 2 x NZXT Havik 140mm Fans 
OSMonitorMonitorKeyboard
Hax'd W7 Ultimate 64-bit Sanyo DP19640 19'' KDS Radius Rad-7xp 17'' Ducky 1087 MX Brown 10keyless 
PowerCaseMouseMouse Pad
Rosewill Capstone 550w Modular NZXT Source 210 w/Modded Window Razer Deathadder 3.5G Steelseries Blizzcon D3 
AudioAudioOtherOther
Phillips FW-C250 2 Speaker Set w/3 CD Changer JBL Sub 6 Subwoofer NZXT Sleeved LED Strip 1m Blue NZXT Sentry 2 Fan Controller 
Other
Colonial Blue Paracord Sleeving 
CPUMotherboardGraphicsRAM
Phenom ii X4 955C2, $31, 5 broken pins, works! ... Biostar A770e3 6.3 Red&Black MSI GTX 460 768mb Twin Frozr II 2 x 2GB Kingston HyperX 1333 OC to 1348CL7@1.65v 
Hard DriveCoolingCoolingCooling
Intel X25-M G2 80GB SSD NH-D14 SE2011 6 x Case Fans (4 x YL-M, NZXT case fan, CM Hype... Jerryrigged Chipset-Northbridge 80mm HSF 
CoolingOSMonitorKeyboard
Jerryrigged VRM Heatsink (sawed off stock AM2 h... Hax'd W7 Ultimate 64bit Sanyo DP19640 19"1360x768 Ducky Cherry Browns 10keyless 
PowerCaseMouseMouse Pad
Antec Earthwatts 430D NZXT Gamma Steelseries Kinzu Optical Steelseries Blizzcon Diablo 3 
  hide details  
Reply
post #78 of 134
9hrs p95 is more than enough. Since you don't fold you are never going to use your cpu at max usage of 100% for more than 9hrs doing anything. It's practically impossible to even game that long at a stretch. Most games and applications will not even come close to using 100% usage of your quad so no worries.
Jay
(13 items)
 
  
CPUMotherboardGraphicsRAM
FX 8350 4.4Ghz at 1.36v GA 78LMT USB3 Rev 5.0 Sapphire R9 285 OC 16GB Kingston Savage Ram 
Hard DriveHard DriveCoolingOS
1TB Western Digital 500GB Seagate Barracuda Noctua NH-D15S Windows 8.1 
MonitorPowerMouseMouse Pad
Asus MG279Q Fressync OCZ ZS 650 Watt PSU Dragonwar ELE-G9 Dragonwar 
  hide details  
Reply
Jay
(13 items)
 
  
CPUMotherboardGraphicsRAM
FX 8350 4.4Ghz at 1.36v GA 78LMT USB3 Rev 5.0 Sapphire R9 285 OC 16GB Kingston Savage Ram 
Hard DriveHard DriveCoolingOS
1TB Western Digital 500GB Seagate Barracuda Noctua NH-D15S Windows 8.1 
MonitorPowerMouseMouse Pad
Asus MG279Q Fressync OCZ ZS 650 Watt PSU Dragonwar ELE-G9 Dragonwar 
  hide details  
Reply
post #79 of 134
Thread Starter 
Yea but it's inconsistent. I literally mirrored the settings that i got 9 hours in, and only got an hour out of it, the only difference was that my ram timings were stock instead of decreased by 2 (the voltage was slightly raised above stock, in both cases).

Like okay, if im not going to be prime95 stable, at least what is more stable. I can't figure out if more or less voltage helps stability. It seems like somewhere around 1.488 voltage is the sweet spot...

i truly have no idea what is going on. even 3.5ghz failed after a 1 hour. 3.5ghz failed in 20 minutes with the same voltages, and slightly raised voltages on NB, RAM. ***.

its got to be some weirdass settings that's screwing with everything. maybe a hardware issue or something. i dont know.

and you know prime95 long testing is necessary - a game might not push it like prime95 does, but a perfect storm of crap will make it crash if it isn't fully stable. I do video encoding, ie streaming, which will have all 4 cores on 90%+ utilization, for hours on end as well, so it is kind of important to be somewhat stable.

edit: maybe its something stupidly ridiculous, like bios color, floppy disabled, maybe even something like cnq being off. just doing a cmos reset, and the only thing im gonna change is the necessary motherboard cpu over voltage (it wont boot without +1 for just turning on the option to be able to overcloc, and +.2 for 3.6ghz+, regardless of vcore, ie 1.55vid + 0 over voltage = 1.55vcore wont boot but 1.25vid+.2v over voltage = 1.4vcore will) and the multiplier, see if some mystery setting is involved.

cpu-nb-vid is going to be 1.1v, i think thats what stock is for the 955, from what i gather (nowhere explicitly says, but i picked it up after seeing people say stuff like 'i raised it .1v to 1.2v). everything, stock, but cpu overvoltage, vid lowered (so vcore is 1.456 after the +.v2 over voltage), and mutiplier to 3.6ghz.
Edited by Belial - 11/14/12 at 1:47am
Build In Progress
(17 items)
 
   
CPUMotherboardGraphicsRAM
Haswell i7-4770K 4.8GHz@1.452v/1.97vRIN Gigabyte Z87X-UD3H Older Gigabyte 7950 (H60 Mod) 2x4GB Gskill 2400CL11 Hynix CFRs 
Hard DriveCoolingOSMonitor
Samsung 830 128gb Corsair H110 w/4x 140mm Yate Loon High Blues W7 x64 Ultimate Yarrgh Matey Dell U2312HM Matte IPS 1080p 
MonitorMonitorKeyboardPower
Sanyo DP19640 18.5" 768p KDS Rad-7xp 1024p CM Storm Quickfire Rapids Brown Rosewill Capstone 750 
CaseMouseMouse PadAudio
Bitfenix Shinobi Modded CM Storm Spawn Steelseries Diablo 3 2 set CD Speaker + Big Sub 
Other
Bitfenix Recon Fan Controller Moded 
CPUMotherboardGraphicsRAM
Delidded i7-3770K 5GHz@1.499 Gigabyte Z77X-UD5H 1.1 Sapphire Dual-X 7950 3L Boost 4x2GB Mushkin Ridgeback 2200mhz 8/11/8/27 1.75v... 
Hard DriveCoolingCoolingCooling
Intel X25-M 80GB SSD NH-D14 SE2011 Noctua 120/140/140 Fans 3 x Yate Loon Mediums (Petras) 2 x NZXT Havik 140mm Fans 
OSMonitorMonitorKeyboard
Hax'd W7 Ultimate 64-bit Sanyo DP19640 19'' KDS Radius Rad-7xp 17'' Ducky 1087 MX Brown 10keyless 
PowerCaseMouseMouse Pad
Rosewill Capstone 550w Modular NZXT Source 210 w/Modded Window Razer Deathadder 3.5G Steelseries Blizzcon D3 
AudioAudioOtherOther
Phillips FW-C250 2 Speaker Set w/3 CD Changer JBL Sub 6 Subwoofer NZXT Sleeved LED Strip 1m Blue NZXT Sentry 2 Fan Controller 
Other
Colonial Blue Paracord Sleeving 
CPUMotherboardGraphicsRAM
Phenom ii X4 955C2, $31, 5 broken pins, works! ... Biostar A770e3 6.3 Red&Black MSI GTX 460 768mb Twin Frozr II 2 x 2GB Kingston HyperX 1333 OC to 1348CL7@1.65v 
Hard DriveCoolingCoolingCooling
Intel X25-M G2 80GB SSD NH-D14 SE2011 6 x Case Fans (4 x YL-M, NZXT case fan, CM Hype... Jerryrigged Chipset-Northbridge 80mm HSF 
CoolingOSMonitorKeyboard
Jerryrigged VRM Heatsink (sawed off stock AM2 h... Hax'd W7 Ultimate 64bit Sanyo DP19640 19"1360x768 Ducky Cherry Browns 10keyless 
PowerCaseMouseMouse Pad
Antec Earthwatts 430D NZXT Gamma Steelseries Kinzu Optical Steelseries Blizzcon Diablo 3 
  hide details  
Reply
Build In Progress
(17 items)
 
   
CPUMotherboardGraphicsRAM
Haswell i7-4770K 4.8GHz@1.452v/1.97vRIN Gigabyte Z87X-UD3H Older Gigabyte 7950 (H60 Mod) 2x4GB Gskill 2400CL11 Hynix CFRs 
Hard DriveCoolingOSMonitor
Samsung 830 128gb Corsair H110 w/4x 140mm Yate Loon High Blues W7 x64 Ultimate Yarrgh Matey Dell U2312HM Matte IPS 1080p 
MonitorMonitorKeyboardPower
Sanyo DP19640 18.5" 768p KDS Rad-7xp 1024p CM Storm Quickfire Rapids Brown Rosewill Capstone 750 
CaseMouseMouse PadAudio
Bitfenix Shinobi Modded CM Storm Spawn Steelseries Diablo 3 2 set CD Speaker + Big Sub 
Other
Bitfenix Recon Fan Controller Moded 
CPUMotherboardGraphicsRAM
Delidded i7-3770K 5GHz@1.499 Gigabyte Z77X-UD5H 1.1 Sapphire Dual-X 7950 3L Boost 4x2GB Mushkin Ridgeback 2200mhz 8/11/8/27 1.75v... 
Hard DriveCoolingCoolingCooling
Intel X25-M 80GB SSD NH-D14 SE2011 Noctua 120/140/140 Fans 3 x Yate Loon Mediums (Petras) 2 x NZXT Havik 140mm Fans 
OSMonitorMonitorKeyboard
Hax'd W7 Ultimate 64-bit Sanyo DP19640 19'' KDS Radius Rad-7xp 17'' Ducky 1087 MX Brown 10keyless 
PowerCaseMouseMouse Pad
Rosewill Capstone 550w Modular NZXT Source 210 w/Modded Window Razer Deathadder 3.5G Steelseries Blizzcon D3 
AudioAudioOtherOther
Phillips FW-C250 2 Speaker Set w/3 CD Changer JBL Sub 6 Subwoofer NZXT Sleeved LED Strip 1m Blue NZXT Sentry 2 Fan Controller 
Other
Colonial Blue Paracord Sleeving 
CPUMotherboardGraphicsRAM
Phenom ii X4 955C2, $31, 5 broken pins, works! ... Biostar A770e3 6.3 Red&Black MSI GTX 460 768mb Twin Frozr II 2 x 2GB Kingston HyperX 1333 OC to 1348CL7@1.65v 
Hard DriveCoolingCoolingCooling
Intel X25-M G2 80GB SSD NH-D14 SE2011 6 x Case Fans (4 x YL-M, NZXT case fan, CM Hype... Jerryrigged Chipset-Northbridge 80mm HSF 
CoolingOSMonitorKeyboard
Jerryrigged VRM Heatsink (sawed off stock AM2 h... Hax'd W7 Ultimate 64bit Sanyo DP19640 19"1360x768 Ducky Cherry Browns 10keyless 
PowerCaseMouseMouse Pad
Antec Earthwatts 430D NZXT Gamma Steelseries Kinzu Optical Steelseries Blizzcon Diablo 3 
  hide details  
Reply
post #80 of 134
Can't you change the cpu nb voltage without changing the cpu nb vid? Since your board has the feature where you have to put in the vcore over volt and not change the vcore entirely in the bios itself have you seen whether or not the vcore is fluctuating within windows and if your getting bad vdroop? Apart from all there could be something up with your mobo. It does support 125TDP chips but the vrms could be heating up as they are unsinked. The vrms maybe getting too hot. Correct me if I'm wrong but isn't that board a 3+1 phase mobo?
Jay
(13 items)
 
  
CPUMotherboardGraphicsRAM
FX 8350 4.4Ghz at 1.36v GA 78LMT USB3 Rev 5.0 Sapphire R9 285 OC 16GB Kingston Savage Ram 
Hard DriveHard DriveCoolingOS
1TB Western Digital 500GB Seagate Barracuda Noctua NH-D15S Windows 8.1 
MonitorPowerMouseMouse Pad
Asus MG279Q Fressync OCZ ZS 650 Watt PSU Dragonwar ELE-G9 Dragonwar 
  hide details  
Reply
Jay
(13 items)
 
  
CPUMotherboardGraphicsRAM
FX 8350 4.4Ghz at 1.36v GA 78LMT USB3 Rev 5.0 Sapphire R9 285 OC 16GB Kingston Savage Ram 
Hard DriveHard DriveCoolingOS
1TB Western Digital 500GB Seagate Barracuda Noctua NH-D15S Windows 8.1 
MonitorPowerMouseMouse Pad
Asus MG279Q Fressync OCZ ZS 650 Watt PSU Dragonwar ELE-G9 Dragonwar 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › Fixing Broken Pins - Phenom 955