Quote:
So mounting it it at the bottom of a case and sleeving wouldn't look like the picture you took?Originally Posted by WiSK 
Ah right. No, that photo was a poor attempt to show how the pinout of the Strider series means you'd have to fold each row of wires when mounting the PSU above the motherboard. Double wires is when the cable has two wires going into the same crimp. To use the example of the Strider series, pin 20 goes from the PSU side and joins to pin 13 at the motherboard end. This is used by the PSU to sense and adjust voltage drop. Problem is that it's hard to sleeve than a 1-to-1.
Ah right. No, that photo was a poor attempt to show how the pinout of the Strider series means you'd have to fold each row of wires when mounting the PSU above the motherboard. Double wires is when the cable has two wires going into the same crimp. To use the example of the Strider series, pin 20 goes from the PSU side and joins to pin 13 at the motherboard end. This is used by the PSU to sense and adjust voltage drop. Problem is that it's hard to sleeve than a 1-to-1.
Matt Damon IS Jason Bourne
(12 items) |
|
Matt Damon IS Jason Bourne
(12 items) |
