Ok so still have a tiny drip coming from the SLI bridge! Argh.. may have to use some kind of gasket sealer or something.. Anyway, I couldn't let a little leak keep me down I have been dying to overclock this thing, especially since de-lidding it earlier today.

So I decided to just go ahead and get some basic testing done with Turbo EVO within windows before really getting after it in the BIOS... so far the temps are great.. the de-lid + LP Ultra really shines.
This is stock with 3.9GHz turbo

4.6 Ghz with voltage set to 1.3 in Turbo EVO... seems to creep up a bit under load

Something to note is that I am currently only running a single Black Ice GTX120 on the CPU. Usually I run the 360 on the CPU, but I decided to use that for the GPUs this time, and upgrade the CPU with an external rad in a few weeks. (This is why the crazy hoses are poking out of the back of the case). But after seeing these results.. not sure if I need to!
These are just 10 min test runs, but the temps still seem to be looking really good. Another thing to note is it is pretty warm in my room right now... probably about ~25C ambient!
Edited by Phobos223 - 11/10/12 at 8:15pm