Originally Posted by socketus
Yah it does ! wow, need a full view pic when you can. Guess I missed your notes about the psu cover - you make it yourself ? what's the material ? Very niCE !
Yup, made it myself a couple pages back.
Originally Posted by 47 Knucklehead
Well, I got the old combination sheet metal shear/brake/roller set up to cut and bend the power supply cover for the case. Just have to finalize the measurements one last time.
He who dies with the most toys wins, right?
Just measured and cut some semi-thick aluminum stock to size and threw a 90 degree bend on it. Then measured and drilled 4 holes for the SSD to be secured, with a couple black screws and some spacers, so the drive floats about 1mm off the top of the painted aluminum.
It was really easy to do, you could almost do it with just a hand vise. I was temped to have Dwood make one custom for me and laser cut some holes to mount the 2 LCD displays for the temperature sensors, but with the one water cooling hose where it was, and as low down in the windows as the PSU sits, I changed my mind and went simple on the cover and will mount the LCD's elsewhere. I'm thinking about making like a 3" by 4" flat aluminum plate, cut the holes for the 2 LCD displays, and then drill 2 holes to mount it on the edge of the rear part of one of the 5.25" drive bays. That way they will be prominently displayed int he window. Either that or I will break out the Dremel and cut 2 holes in one of the 5.25" drive bay covers and mount them on the outside of the case on the front. Not sure yet.