Ok I have been working really hard to overclock this beast for a while now since I got the last kit to make it quad channel memory supported and I am finding its a whole lot harder to overclock when its running quad channel vs. dual channel. B4 I was running an overclock at 4.8 with 2133mhz memory at or around 1.4vcore with a lot lower temps then im getting now. Now im getting under load 90 degrees C on some cores and around high 70s on most the others. I am running currently at 1.395 vcore with a high setting on LLC and XMP profile at 2133mhz. I am not worried about getting any higher then 4.8ghz now as it comes at the cost of seeing throttling due to I think my VRM temps. all im concerned about now is how I can get my old overclock or close to it with dual channel an acceptable temps in a quad channel setup
Thanks!
Marcus
P.S.
Is 90 acceptable on some cores when stress testing idle im running in the 40s and 50s
Thanks!
Marcus
P.S.
Is 90 acceptable on some cores when stress testing idle im running in the 40s and 50s







