Overclock.net › Forums › Intel › Intel Motherboards › EVGA 680i T1 not correctly detecting CPU Multi
New Posts  All Forums:Forum Nav:

EVGA 680i T1 not correctly detecting CPU Multi

post #1 of 2
Thread Starter 
I am trying to bring some life back to my old EVGA 680i T1 board, and acquired a C2D E7400 CPU to put in it. I installed it and it booted fine, but was not detecting the speed properly (ran 2.66ghz). I went and updated the BIOS to the current version per EVGA website, but still 2.66.

I went into the bios to see if a setting somewhere was off (manual CPU multiplier setting or something) highest multiplier I could use was 10x, instead of the 10.5 the chip is designed with (267mhz * 10.5 = 2800mhz)


While I can OC it to 3.2 at this multi and current cooling solution...that extra .5 would help a lot. Any way I can get this thing to detect properly? I know this board was not designed with this generation of C2D but it seems to work fine with it otherwise...
Dead Computer
(13 items)
 
  
CPUMotherboardGraphicsRAM
Melted Athlon 5000x2 BE Warped Asus M3A Waterlogged 8800GTS (G80) 4gb of Burnt Crucial Blstx 
Hard DriveOptical DriveOSMonitor
Poofed 2x250 Seagates, Raid0 Shattered Liteon SATA 20x DVDRW VISTA Cracked HP w2207 
KeyboardPowerCaseMouse
Generic, missing spacebar Popped Ultra 600Watt 'VS' Series Dented Ultra Microfly MX6 Microsoft 5-Button Optical 
Mouse Pad
Rubbery Foam pad thing 
  hide details  
Reply
Dead Computer
(13 items)
 
  
CPUMotherboardGraphicsRAM
Melted Athlon 5000x2 BE Warped Asus M3A Waterlogged 8800GTS (G80) 4gb of Burnt Crucial Blstx 
Hard DriveOptical DriveOSMonitor
Poofed 2x250 Seagates, Raid0 Shattered Liteon SATA 20x DVDRW VISTA Cracked HP w2207 
KeyboardPowerCaseMouse
Generic, missing spacebar Popped Ultra 600Watt 'VS' Series Dented Ultra Microfly MX6 Microsoft 5-Button Optical 
Mouse Pad
Rubbery Foam pad thing 
  hide details  
Reply
post #2 of 2

Unfortunately, this board is not capable of doing that.  I think this half multiplier ability was first introduced in the nForce 700 series.

It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › EVGA 680i T1 not correctly detecting CPU Multi