Originally Posted by vercetti
ok guys i need help.... i got:
XSPC Raystorm Extreme Universal CPU Watercooling Kit w/ RX360 Rev 2 Radiator/D5 Pump/Res
i got two evga gtx 680.... i plan order two XSPC Razor GTX 680 to make it sli wattercooled....
my question is what stuff i need to buy to fitting every part.....
any suggestion from http://www.performance-pcs.com
will help thankz
I am not sure about the XSPC blocks but the EK blocks are great and you will need the following if you get 2 EK blocks. I also installed the XSPC Raystorm and it matches the EK Blocks great.
I originally had just a CPU loop and last night I installed water blocks on my gtx 680's and added them to the loop. I have the Rampage IV Extreme which has 3 slot spacing between the 2 cards. if your mobo is the same you will need -
2 blocks for your cards
Triple Slot Serial or Parallel Bridge - and make sure you order a blank to cover the unused slot. I used a triple Bridge because it fits my mobo and allows me to upgrade to a third card in the future.
The Bridge uses 2 fittings of your choice. Make sure to get 2 fittings for each component and maybe some 45 and 90 degree angled fittings - I guess if you are getting the kit it should have all the fittings you need. Just make sure to get 2 extra for the sli bridge.
I finished my loop last night and my cards went from 45 degrees idle to about 22 and they are very silent. I haven't gamed yet because i finished late last night.