Originally Posted by PCModderMike
So many Monstas!
Pending to go bigger monstas!
Originally Posted by pcnoob1
I've been on OCN for a couple of years now and I can say that Wermad's builds are always entertaining to watch. I remember back when you had that poor Haf cased stuffed to the gill's with rad's lol
Lol, i've been through so many builds.
HAF 932 (2010)
Mountain Mods Extended Ascension
CM 690 II
DD Double Wide 29
Mountain Mods custom
Originally Posted by nasmith2000
omg this is awesome. sweet case.
Originally Posted by lifeisshort117
hahaaaaa i so take it you like the monstas?
been thinking about selling my black ice sr1's and going with all monstas - but a 480 up top instead of the 360 i have at the moment.
they look so AWESOME
if i may ask - what fan would you recommend being the perfect compliment to a monsta?
Well, they're not high density rads so they can pair up nicely with the UT60s, SR1s, and RX series.
Originally Posted by malmental
you know why I like you @ wermad..?
because your a twisted phuck with your imagination.
this might be the best build log I have seen in all my years..
Lol. Tbh, I have seen much more extreme builds but my habit of indecisiveness really has pushed me through all these changes. This is the final push until I get permission for something "different".
Anyways, I have some crappy news. I got a RIVE extreme but i couldn't budget to keep that and make it work and do the upgrades I wanted to the loop (mb block, dual ram blocks, and Monsta 480s). Plus, the GB was working perfectly fine and the colors match my build theme. Sadly, in the process of musical chairs testing both mb, something went wrong and half my gpus were throttling and the other half were stuck @ 50% load. After some trouble shooting, found the Zotac was bad and there was a clog in my system. I noticed clog since there was low flow on the cpu blocks output port. Opened up the M6 and found lots of debris stuck between the fins hindering flow. Cleaned that up and flow was back to normal. Unfortunately, I think my Zotac was spiking because of the flow restriction and some other issue. After I got my system stable, I noticed the Zotac was about 10-20°c hotter. More testing and no improvement, including re-tim'ing. Time for rma
.Edited by wermad - 1/7/13 at 4:11pm