Here a few more promised pics:
cleaned up the inside a bit more. just the internal usb 3.0 to 2.0 adapter cabel on left side has to go away. but this happens, when I get my PCIe card with another internal USB 3.0 header
the 2 ODD went outside. sata data and power cables gone through bottom cutouts inside the cupboard. inf not needed, door is closed
here the usb 3 to usb 2 adapter. the ccfl 30cm is build in from left to right if I#m working under the mainboard tray. the ccfl sits on a few Lego bricks. fixed with power tape
my external docking station. fan mounted to cool down the HDD. power from fan throuch my internal 2nd fan controler.
after removing the 2 fan controlers and build in to the right front, sidepanel looks crappy. but today I got my CM Order - so I replaced it.
cut out on mesh area will be done next week, when I get my plexi for side and top panel. then the top Panel gets a bigger window, as a few did here before. u-profiles also ordered today. will then also next week here
I just have to check where I then put my 3 LED bars which are now in the top, because the plexi hast to be a gig larger then the cutout
furthermmore I've ordered today a very unique LED Flash unit which will go external onto the top. more I wouldn't tell yet - just as much that will be powered on the pc with usb and flashes to the sound of music (not per microphone) . let's get surprised...
today ordered new 140mm front fans from noiseblocker, because both new akasa apache 140mm fans have a noisy beariny clicking. (noise of fans is very quiet) will return them then.