Here are the latests Updates
1)I have finally managed to find a good spot for the Pumps. While the Pumps are here, i can install extra wide Graphic Cards, and i dont need to worry about the fact that waterblocks of these extrawide graphic cards make the card extra wider because of the In and Out Inlets
2)I have also connected the Aquacomputer Peripherals, the Orange and Blue Cables go to the Red Pumps, and their Reservoir Fill Sensors. The Blue and Black Cabels connect the D5 Pumps mounted on the Radiators. This way i can have them connected all the time, and i wont probably need to setup Aquabus connection since the USB is on all the Time. And here is a top View of the Stuff. The 2 extra Free slots are for the Flow Meters.
3)A closeup of the Pumps. As you can see the left Pump is tied together, because i broke a teeth that holds together the Pump and Reservoir pieces. This way i wont have to buy another reservoir which is 70 euros.
4)Since i relocated the 140.1 double circuit radiator, i had to bring its 30% piece back in the CPU Loop. Here is how it gets connected back in the loop.
5)A wider view of how the water loop connection looks like. I managed to make it out of the tube pieces ihad by, i didnt need to cut extra tubing that much.
6)A view of how the back looks like now. I have used these
adapters to connect the 4 front usb 3.0 ports, and another 2 usb 3.0 front ports one of which is the bitfenix card reader which also connects through usb 3.0
This way i could scrap the Silverstone ECU01 PCI Express adapters
that offered 19 PIN internal USB 3.0 connectors. Since these were powered through SATA, i had to scrap those connections as well, since they werent needed any more. In the mean time Silverstone launched the ECU05 PCI Express adapter
that has USB 3.1 Connector wich can utilize the whole PCI-E 2.0 x2 10Gbps throughput through which its connected to the motherboard. A nice way to add high speed USB 3.1 to the PC
7)Here are the Delock Adapters (Item No. 65398) which made the whole thing possible. Since the whole contraption is pretty big, i had to find a place where thery wouldnt come in way, I had to use some 19PIN USB 3.0 extenders, to bring these adapters where you see them, and from here another cable that comes in the USB 3.0 HUB. I glued them in place with the glue band, now they wont be in the way. There are enough cables as they are.
8)You can see here the 3rd USB 3.0 Delock adapter that connects with the bitfenix card reader and adds it in the USB 3.0 HUB
9)Here is how the back looks now. The red cable that you can barely see that goes in the USB 3.0 Hub connects to the Aquaero 6 XT, and the 6 black and blue cables connect to the Aquacomputer Poweradjusts.
10)Here you can see how the back evolved through the multiple modifications the PC suffered. I have finally find a way to connect the 5 pin USB Aquacomputer peripherals to the USB HUBs through a standard USB connector. THat proved difficult to achieve since i had a viariable length to deal with, and i had to have a cable that has a standard USB connector on one side, and a 4 or 5 pin USB adapter on the other side. Such cables dont exist, so at first i used standard USB cable that i have cut to length (the blue ones). These resultated in long cables, i wasnt that statisfied of the result. THen i tried with coiled cables. The result was a mess as you can see.
Then it hit me this time. I could take USB cables and position them on the HUBs, and from here extend the connections to the Poweradjusts since i had USB 2.0 bulck cable lying around (thats the blue and black cable you see coming from on top of the Hubs.
And here is how it looked until now. This time i am satisfied. I will only have a single USB 3.0 Slot on the lower USB hub free.
Heheheh, is the PC working now, you might ask yourself. I am rocking a 750titanium Card, waiting for the Radeon 480x to show up, and hopefully Powercolor will build a Dual 480x2 Devil. Since i need a dual card to install 4 GPUs. And as tenting as the performance of the Geforce 1080 might be, i own a freesync monitor, and AMD cards are better for mining.
The PC no, it still doesnt work, since the pump leaks, because i forgot to install a gasket, once i replaced a broken pump part (which had said gasket attached). The gasket should arrive this week sometime, and the PC will be working again. THis month im going on holiday, and the video cards i will get me after i come from Vacation.
That will be second week of August. Untill then ill know whats the deal with custom 480x models, and i powercolor launched a Devil Dual Card. THey had better.
The Plan is to get two of them and cool them with a Custom Made Alphacool Waterblock. Instead of 1000 Watts what two 390x2 would have drawed, these cards would draw only half of that, maybe 600 Watts (4 GPUs)
We shall see.