Overclock.net › Forums › AMD › AMD CPUs › Phenom II x4 B55 @ 4.2Ghz with Antec Kühler H20 620
New Posts  All Forums:Forum Nav:

Phenom II x4 B55 @ 4.2Ghz with Antec Kühler H20 620 - Page 2

post #11 of 24
If your vcore is set to 1.5v in BIOS, you probably have LLC on. I can see it's quite aggressive here. Turn it off and re-test at 1.5vcore. Your temps are right on the max safe for your CPU (62C).

Also, your temps are quiet low for that cooler and voltage. If I go past 1.55v on my CPU, the temps shoot past 62C. What fans are you using for your push/pull configuration?
Bill Cosby
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X4 955 BE @ 4.0GHz/1.5v ASUS M4A88T-V EVO EVGA GTX 460 SE 1GB 940/1880/2050 8GB Corsair DDR3 1333MHz 
Hard DriveOSMonitorPower
WD 160GB 7200 RPM Windows 7 x64 ACER AL2016W OCZ StealthXtreme 700W 
CaseMouse
Rosewill Destroyer Logitech 
  hide details  
Reply
Bill Cosby
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X4 955 BE @ 4.0GHz/1.5v ASUS M4A88T-V EVO EVGA GTX 460 SE 1GB 940/1880/2050 8GB Corsair DDR3 1333MHz 
Hard DriveOSMonitorPower
WD 160GB 7200 RPM Windows 7 x64 ACER AL2016W OCZ StealthXtreme 700W 
CaseMouse
Rosewill Destroyer Logitech 
  hide details  
Reply
post #12 of 24
Thread Starter 
Quote:
Originally Posted by Primus View Post

If your vcore is set to 1.5v in BIOS, you probably have LLC on. I can see it's quite aggressive here. Turn it off and re-test at 1.5vcore. Your temps are right on the max safe for your CPU (62C).

I will have a look in to that and the I said to myself if it hits 65oc I will clock down but so far I'm almost happy with this. Also I'm thinking of turning my rear fan around so it pulls in cool are so have front and back pull in then one fan + the H20 620 in push pull taking out the warm air out the top.
Edited by arranmc182 - 11/24/12 at 8:17am
    
CPUMotherboardGraphicsRAM
Phenom II X6 1090T GIGABYTE GA-970A-UD3P Inno3D GeForce GTX 970 iChiLL x4 Air Boss Ultra 4 x 4 GB DDR3 
Hard DriveHard DriveOptical DriveCooling
SanDisk SSD (SDSSDP-128G-G25) Western Digital Caviar Blue Samsung Super WriteMaster S-ATA 22X DVD-RW Antec Kühler H1200 PRO 
OSMonitorKeyboardPower
Windows 10 Pro 64-Bit Samsung SyncMaster B2230H Razer Blackwidow 2014 EVGA 600W 80+ White 
CaseMouseMouse PadAudio
Corsair Carbide 300r GAMEware Puntero XFX Warpad On barod  
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Phenom II X6 1090T GIGABYTE GA-970A-UD3P Inno3D GeForce GTX 970 iChiLL x4 Air Boss Ultra 4 x 4 GB DDR3 
Hard DriveHard DriveOptical DriveCooling
SanDisk SSD (SDSSDP-128G-G25) Western Digital Caviar Blue Samsung Super WriteMaster S-ATA 22X DVD-RW Antec Kühler H1200 PRO 
OSMonitorKeyboardPower
Windows 10 Pro 64-Bit Samsung SyncMaster B2230H Razer Blackwidow 2014 EVGA 600W 80+ White 
CaseMouseMouse PadAudio
Corsair Carbide 300r GAMEware Puntero XFX Warpad On barod  
  hide details  
Reply
post #13 of 24
Thread Starter 
Thinking of chaning my fan config to this just try and get a bit more cool air in side the case here is a simple diagram I made in pain the the front fan is a 140mm all other 120mm. So do you think this will help at all with temps.

    
CPUMotherboardGraphicsRAM
Phenom II X6 1090T GIGABYTE GA-970A-UD3P Inno3D GeForce GTX 970 iChiLL x4 Air Boss Ultra 4 x 4 GB DDR3 
Hard DriveHard DriveOptical DriveCooling
SanDisk SSD (SDSSDP-128G-G25) Western Digital Caviar Blue Samsung Super WriteMaster S-ATA 22X DVD-RW Antec Kühler H1200 PRO 
OSMonitorKeyboardPower
Windows 10 Pro 64-Bit Samsung SyncMaster B2230H Razer Blackwidow 2014 EVGA 600W 80+ White 
CaseMouseMouse PadAudio
Corsair Carbide 300r GAMEware Puntero XFX Warpad On barod  
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Phenom II X6 1090T GIGABYTE GA-970A-UD3P Inno3D GeForce GTX 970 iChiLL x4 Air Boss Ultra 4 x 4 GB DDR3 
Hard DriveHard DriveOptical DriveCooling
SanDisk SSD (SDSSDP-128G-G25) Western Digital Caviar Blue Samsung Super WriteMaster S-ATA 22X DVD-RW Antec Kühler H1200 PRO 
OSMonitorKeyboardPower
Windows 10 Pro 64-Bit Samsung SyncMaster B2230H Razer Blackwidow 2014 EVGA 600W 80+ White 
CaseMouseMouse PadAudio
Corsair Carbide 300r GAMEware Puntero XFX Warpad On barod  
  hide details  
Reply
post #14 of 24
Try this: have your 620 mounted as an exhaust in push/pull at the rear, and the top fans as intakes. That way your VRMs are going to be cooled, and your closed loop system will receive cool air.
Bill Cosby
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X4 955 BE @ 4.0GHz/1.5v ASUS M4A88T-V EVO EVGA GTX 460 SE 1GB 940/1880/2050 8GB Corsair DDR3 1333MHz 
Hard DriveOSMonitorPower
WD 160GB 7200 RPM Windows 7 x64 ACER AL2016W OCZ StealthXtreme 700W 
CaseMouse
Rosewill Destroyer Logitech 
  hide details  
Reply
Bill Cosby
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X4 955 BE @ 4.0GHz/1.5v ASUS M4A88T-V EVO EVGA GTX 460 SE 1GB 940/1880/2050 8GB Corsair DDR3 1333MHz 
Hard DriveOSMonitorPower
WD 160GB 7200 RPM Windows 7 x64 ACER AL2016W OCZ StealthXtreme 700W 
CaseMouse
Rosewill Destroyer Logitech 
  hide details  
Reply
post #15 of 24
Thread Starter 
Quote:
Originally Posted by Primus View Post

Try this: have your 620 mounted as an exhaust in push/pull at the rear, and the top fans as intakes. That way your VRMs are going to be cooled, and your closed loop system will receive cool air.

Wish i could put my 620 at back but can can only have it at the from cus of the case mad.gif .
    
CPUMotherboardGraphicsRAM
Phenom II X6 1090T GIGABYTE GA-970A-UD3P Inno3D GeForce GTX 970 iChiLL x4 Air Boss Ultra 4 x 4 GB DDR3 
Hard DriveHard DriveOptical DriveCooling
SanDisk SSD (SDSSDP-128G-G25) Western Digital Caviar Blue Samsung Super WriteMaster S-ATA 22X DVD-RW Antec Kühler H1200 PRO 
OSMonitorKeyboardPower
Windows 10 Pro 64-Bit Samsung SyncMaster B2230H Razer Blackwidow 2014 EVGA 600W 80+ White 
CaseMouseMouse PadAudio
Corsair Carbide 300r GAMEware Puntero XFX Warpad On barod  
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Phenom II X6 1090T GIGABYTE GA-970A-UD3P Inno3D GeForce GTX 970 iChiLL x4 Air Boss Ultra 4 x 4 GB DDR3 
Hard DriveHard DriveOptical DriveCooling
SanDisk SSD (SDSSDP-128G-G25) Western Digital Caviar Blue Samsung Super WriteMaster S-ATA 22X DVD-RW Antec Kühler H1200 PRO 
OSMonitorKeyboardPower
Windows 10 Pro 64-Bit Samsung SyncMaster B2230H Razer Blackwidow 2014 EVGA 600W 80+ White 
CaseMouseMouse PadAudio
Corsair Carbide 300r GAMEware Puntero XFX Warpad On barod  
  hide details  
Reply
post #16 of 24
Ah, I see. That's not such a bad setup, though. Try this: keep your 620 mounted where it is but have it draw cool air from the outside (intake), do the same thing with your other top fan, and have the rear fan as an exhaust. That way your 620 will receive cool air, your VRMs will receive cool air, and all warm air will be exhausted out the back.
Bill Cosby
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X4 955 BE @ 4.0GHz/1.5v ASUS M4A88T-V EVO EVGA GTX 460 SE 1GB 940/1880/2050 8GB Corsair DDR3 1333MHz 
Hard DriveOSMonitorPower
WD 160GB 7200 RPM Windows 7 x64 ACER AL2016W OCZ StealthXtreme 700W 
CaseMouse
Rosewill Destroyer Logitech 
  hide details  
Reply
Bill Cosby
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X4 955 BE @ 4.0GHz/1.5v ASUS M4A88T-V EVO EVGA GTX 460 SE 1GB 940/1880/2050 8GB Corsair DDR3 1333MHz 
Hard DriveOSMonitorPower
WD 160GB 7200 RPM Windows 7 x64 ACER AL2016W OCZ StealthXtreme 700W 
CaseMouse
Rosewill Destroyer Logitech 
  hide details  
Reply
post #17 of 24
Thread Starter 
Quote:
Originally Posted by Primus View Post

Ah, I see. That's not such a bad setup, though. Try this: keep your 620 mounted where it is but have it draw cool air from the outside (intake), do the same thing with your other top fan, and have the rear fan as an exhaust. That way your 620 will receive cool air, your VRMs will receive cool air, and all warm air will be exhausted out the back.

I didnt think about swapping the top fans might just try swapping the rear fan first see if that helps at all.
    
CPUMotherboardGraphicsRAM
Phenom II X6 1090T GIGABYTE GA-970A-UD3P Inno3D GeForce GTX 970 iChiLL x4 Air Boss Ultra 4 x 4 GB DDR3 
Hard DriveHard DriveOptical DriveCooling
SanDisk SSD (SDSSDP-128G-G25) Western Digital Caviar Blue Samsung Super WriteMaster S-ATA 22X DVD-RW Antec Kühler H1200 PRO 
OSMonitorKeyboardPower
Windows 10 Pro 64-Bit Samsung SyncMaster B2230H Razer Blackwidow 2014 EVGA 600W 80+ White 
CaseMouseMouse PadAudio
Corsair Carbide 300r GAMEware Puntero XFX Warpad On barod  
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Phenom II X6 1090T GIGABYTE GA-970A-UD3P Inno3D GeForce GTX 970 iChiLL x4 Air Boss Ultra 4 x 4 GB DDR3 
Hard DriveHard DriveOptical DriveCooling
SanDisk SSD (SDSSDP-128G-G25) Western Digital Caviar Blue Samsung Super WriteMaster S-ATA 22X DVD-RW Antec Kühler H1200 PRO 
OSMonitorKeyboardPower
Windows 10 Pro 64-Bit Samsung SyncMaster B2230H Razer Blackwidow 2014 EVGA 600W 80+ White 
CaseMouseMouse PadAudio
Corsair Carbide 300r GAMEware Puntero XFX Warpad On barod  
  hide details  
Reply
post #18 of 24
Thread Starter 
Well I'm done with this I swapped the back fan so its now an in take it did run cooler but if I lower the core volts below 1.62v its unstable & can not do more than 3mins on OCCT so going to clock down to 4.1Ghz & try that with 1.52v on the core as I don't like to run at 1.6+ v as my motherboard is not top spec. So I would say an Unlocked Phenom II x2 555BE can run at 4.2Ghz if you are willing to run with crazy volts but to me its not worth it.
Edited by arranmc182 - 11/27/12 at 1:35pm
    
CPUMotherboardGraphicsRAM
Phenom II X6 1090T GIGABYTE GA-970A-UD3P Inno3D GeForce GTX 970 iChiLL x4 Air Boss Ultra 4 x 4 GB DDR3 
Hard DriveHard DriveOptical DriveCooling
SanDisk SSD (SDSSDP-128G-G25) Western Digital Caviar Blue Samsung Super WriteMaster S-ATA 22X DVD-RW Antec Kühler H1200 PRO 
OSMonitorKeyboardPower
Windows 10 Pro 64-Bit Samsung SyncMaster B2230H Razer Blackwidow 2014 EVGA 600W 80+ White 
CaseMouseMouse PadAudio
Corsair Carbide 300r GAMEware Puntero XFX Warpad On barod  
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Phenom II X6 1090T GIGABYTE GA-970A-UD3P Inno3D GeForce GTX 970 iChiLL x4 Air Boss Ultra 4 x 4 GB DDR3 
Hard DriveHard DriveOptical DriveCooling
SanDisk SSD (SDSSDP-128G-G25) Western Digital Caviar Blue Samsung Super WriteMaster S-ATA 22X DVD-RW Antec Kühler H1200 PRO 
OSMonitorKeyboardPower
Windows 10 Pro 64-Bit Samsung SyncMaster B2230H Razer Blackwidow 2014 EVGA 600W 80+ White 
CaseMouseMouse PadAudio
Corsair Carbide 300r GAMEware Puntero XFX Warpad On barod  
  hide details  
Reply
post #19 of 24
Quote:
Originally Posted by arranmc182 View Post

Well I'm done with this I swapped the back fan so its now a in take it did run cooler but if I lower the core volts below 1.62v its unstable a can not do more than 3mins on OCCT so going to clock down to 4.1Ghz & try that with 1.52v on the core as I don't like to run at 1.6+ v as my motherboard is not top spec. So I would say a a Unlocked Phenom II x2 555BE can run at 4.2Ghz if you are willing to run with crazy volts but to me its not worth it.

ive gotten a cpu-z validation with my b55 on air at 4.4Ghz
ran occt for about an hour before an error
4.2 was stable 24/7 with 1.6 vcore ht 2000 nb 2600
and this was on a 4+1 board that the vrms were heatsinked, and the board worked great. i replaced it with a 990fxa-ud5 so i could go crossfire.
*censored*
(15 items)
 
vision
(4 items)
 
 
CPUMotherboardGraphicsRAM
Phenom II X4 910e GA-880GM-UD2H PowerColor AX6750 OCZ DDR2 PC2-8500  
  hide details  
Reply
*censored*
(15 items)
 
vision
(4 items)
 
 
CPUMotherboardGraphicsRAM
Phenom II X4 910e GA-880GM-UD2H PowerColor AX6750 OCZ DDR2 PC2-8500  
  hide details  
Reply
post #20 of 24
Thread Starter 
Quote:
Originally Posted by ~kRon1k~ View Post

ive gotten a cpu-z validation with my b55 on air at 4.4Ghz
ran occt for about an hour before an error
4.2 was stable 24/7 with 1.6 vcore ht 2000 nb 2600
and this was on a 4+1 board that the vrms were heatsinked, and the board worked great. i replaced it with a 990fxa-ud5 so i could go crossfire.

Im not too sure on the 1.6+ volts on the CPU as it almost hots 65oc on temps and I don't like that, now testing 4.1Ghz with 1.52ish volts as want to keep under 1.6volts.
    
CPUMotherboardGraphicsRAM
Phenom II X6 1090T GIGABYTE GA-970A-UD3P Inno3D GeForce GTX 970 iChiLL x4 Air Boss Ultra 4 x 4 GB DDR3 
Hard DriveHard DriveOptical DriveCooling
SanDisk SSD (SDSSDP-128G-G25) Western Digital Caviar Blue Samsung Super WriteMaster S-ATA 22X DVD-RW Antec Kühler H1200 PRO 
OSMonitorKeyboardPower
Windows 10 Pro 64-Bit Samsung SyncMaster B2230H Razer Blackwidow 2014 EVGA 600W 80+ White 
CaseMouseMouse PadAudio
Corsair Carbide 300r GAMEware Puntero XFX Warpad On barod  
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Phenom II X6 1090T GIGABYTE GA-970A-UD3P Inno3D GeForce GTX 970 iChiLL x4 Air Boss Ultra 4 x 4 GB DDR3 
Hard DriveHard DriveOptical DriveCooling
SanDisk SSD (SDSSDP-128G-G25) Western Digital Caviar Blue Samsung Super WriteMaster S-ATA 22X DVD-RW Antec Kühler H1200 PRO 
OSMonitorKeyboardPower
Windows 10 Pro 64-Bit Samsung SyncMaster B2230H Razer Blackwidow 2014 EVGA 600W 80+ White 
CaseMouseMouse PadAudio
Corsair Carbide 300r GAMEware Puntero XFX Warpad On barod  
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › Phenom II x4 B55 @ 4.2Ghz with Antec Kühler H20 620