Overclock.net › Forums › Intel › Intel Motherboards › unless anyone has an idea, i think I'm screwed...
New Posts  All Forums:Forum Nav:

unless anyone has an idea, i think I'm screwed...

post #1 of 2
Thread Starter 
Posting from my phone, so i won't be very spectacular with my writing... So, getting this new build off the ground, I used some existing parts. I have all new watercooling gear.
Lighting control board on the Phantom 820 went up in smoke, and I think it may have taken everything with. My mobo will post, but after about 1minute, it will go to blackscreen. Every time. I can get into bios. Still happens. Tried booting into windows, still happens.

Debug code is A6, which is nothing odd. But the black screen remains while the systems loop is still going. Pump works, so the PSU is fine. GPU wouldn't give out as it worked fine 2 days ago.

Ive unplugged everything from the PSU and mobo, , save for mobo, GPU, pump, still happens.

Can't be overheating as temps in bios are all between 28-30C.

Existing:
Asrock extreme 6 x79
Intel 3820
RAM
850watt PSU
7870 GPU
Aquaero


Any thoughts? Or is my mobo fried?
post #2 of 2
this is a real long shot but try putting the motherboard driver disk in your dvd drive before booting into bios, i had a similar issue on my z77 extreme 6 board and i kept getting A6 debug code until i put the disk in the drive then tried to boot. Totally weird.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › unless anyone has an idea, i think I'm screwed...