Originally Posted by ice445
Before trying displayport, install the monitor driver. See if that helps.
I installed the driver, and it's correctly recognized in the device manager now. In windows it just calls it display device on DVI.
Also showing the same old 240hz at 1024x768.
I'll try CRU.
EDIT: It's on page 10(the timings), but the problem is, CRU doesn't even see my monitor.
I've never had problems with it before.
This is a fresh install of Windows too.
My displayport idea won't work. My computer is in the closet and about 20ft away. They don't make 25ft displayport 1.2 cables =/
Right now I am using a belkin dual link dvi kvm, and then a gender changer connected to a 15ft dual link dvi cable. It's a pretty shoddy setup, but it does 120hz without artifacts. It can't do 144hz, but it does it fine with it set to CVT reduced blanking. Still, I didn't have any issues on my old vg236he.
EDIT: swapped to this cable all works now
http://www.amazon.com/gp/product/B005B7EVPC/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1Edited by jigglywiggly - 4/6/13 at 11:33am