Overclock.net › Forums › Cooling › Water Cooling › Need good chipset waterblock and possibly custom WC Rig
New Posts  All Forums:Forum Nav:

Need good chipset waterblock and possibly custom WC Rig - Page 4

post #31 of 53
Quote:
Originally Posted by beret9987 View Post
Definitely! I'm found these Delta 120mm 130CFM on ebay through a thread so I might buy though sinces its cheaper.

Your not really going to need that high a cfm fan with the GTS or GTX rad's.....Delta's have a higher pitch sound to them then Sunnons or Panaflo's, I don't like them, a lot of people like them though........What-ever melts your butter I guess....
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 4545Mhz*9 w/1.29V DFI DK P45 XFX 8800 GS D9GKX & D9GMH 
Hard DriveOptical DriveOSPower
2x Seagate 160 Perp. RD-1 2x Asus Vista Premium Corsair HX 620 
Case
Open Bench 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 4545Mhz*9 w/1.29V DFI DK P45 XFX 8800 GS D9GKX & D9GMH 
Hard DriveOptical DriveOSPower
2x Seagate 160 Perp. RD-1 2x Asus Vista Premium Corsair HX 620 
Case
Open Bench 
  hide details  
Reply
post #32 of 53
Quote:
Originally Posted by beret9987 View Post
Should I buy like a fillport off of Danger den or something like that? Also, should I buy a T for refilling?

You can use the brass fil-port for a drain line, plumb it into your lowest line...It's nice when it comes time to drain..With a res that's where you fill and bleed at...You are going to use a res aren't you?
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 4545Mhz*9 w/1.29V DFI DK P45 XFX 8800 GS D9GKX & D9GMH 
Hard DriveOptical DriveOSPower
2x Seagate 160 Perp. RD-1 2x Asus Vista Premium Corsair HX 620 
Case
Open Bench 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 4545Mhz*9 w/1.29V DFI DK P45 XFX 8800 GS D9GKX & D9GMH 
Hard DriveOptical DriveOSPower
2x Seagate 160 Perp. RD-1 2x Asus Vista Premium Corsair HX 620 
Case
Open Bench 
  hide details  
Reply
post #33 of 53
Thread Starter 
Lol. Never heard that saying before. I'm about to buy everything off of the Danger Den Store. I have the pump,res,rad, and 15 feet of tubing in my cart. Anything else I need to buy off of them? And what about the fillport? Do i need one or should I just get a t-line and then seal it off?
*EDIT* Yea I'm using a res. That DD 5 and 1/4 inch one.
The Naked Scooter
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 4Ghz@1.24V Asus P6T Deluxe eVGA GTX 285 12GB Patriot DDR3-1600 8-8-8-24@1.65V 
Hard DriveOptical DriveOSMonitor
2x640GB WD in RAID 0+1TB Seagate 7200.11 HP LightScribe DVD Burner Windows 7 Ultimate x64 22" Samsung 720p HDTV 
KeyboardPowerCaseMouse
Logitech G15 1000W Antec TruePower Quattro CoolerMaster ATCS 840 Logitech G9x 
  hide details  
Reply
The Naked Scooter
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 4Ghz@1.24V Asus P6T Deluxe eVGA GTX 285 12GB Patriot DDR3-1600 8-8-8-24@1.65V 
Hard DriveOptical DriveOSMonitor
2x640GB WD in RAID 0+1TB Seagate 7200.11 HP LightScribe DVD Burner Windows 7 Ultimate x64 22" Samsung 720p HDTV 
KeyboardPowerCaseMouse
Logitech G15 1000W Antec TruePower Quattro CoolerMaster ATCS 840 Logitech G9x 
  hide details  
Reply
post #34 of 53
Quote:
Originally Posted by beret9987 View Post
Lol. Never heard that saying before. I'm about to buy everything off of the Danger Den Store. I have the pump,res,rad, and 15 feet of tubing in my cart. Anything else I need to buy off of them? And what about the fillport? Do i need one or should I just get a t-line and then seal it off?
*EDIT* Yea I'm using a res. That DD 5 and 1/4 inch one.

Yeah you can just use a T-Line for a drain works just as well and is cheaper....Clamps are you going with plastic or metal...They have the plastic ones there if that's the kind you want to use......About all I can think of off hand...Are you ordering Fluid Xp and stuff from SVC? They have it at DD to....
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 4545Mhz*9 w/1.29V DFI DK P45 XFX 8800 GS D9GKX & D9GMH 
Hard DriveOptical DriveOSPower
2x Seagate 160 Perp. RD-1 2x Asus Vista Premium Corsair HX 620 
Case
Open Bench 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 4545Mhz*9 w/1.29V DFI DK P45 XFX 8800 GS D9GKX & D9GMH 
Hard DriveOptical DriveOSPower
2x Seagate 160 Perp. RD-1 2x Asus Vista Premium Corsair HX 620 
Case
Open Bench 
  hide details  
Reply
post #35 of 53
Thread Starter 
Okay buying T-line! I can probably find something to seal it with at my hardware store. I'm gonna go coolant shopping on line later tonight. I plan on using the metal hose clamps with the ones with the screws on them. It's like a #7 right? Ordering GPU block tonight and I'll buy the stinger tomorrow hopfully. How long does it take to get one made? Oh and buying rad box from SVC probably with 120mm fans off of ebay.
The Naked Scooter
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 4Ghz@1.24V Asus P6T Deluxe eVGA GTX 285 12GB Patriot DDR3-1600 8-8-8-24@1.65V 
Hard DriveOptical DriveOSMonitor
2x640GB WD in RAID 0+1TB Seagate 7200.11 HP LightScribe DVD Burner Windows 7 Ultimate x64 22" Samsung 720p HDTV 
KeyboardPowerCaseMouse
Logitech G15 1000W Antec TruePower Quattro CoolerMaster ATCS 840 Logitech G9x 
  hide details  
Reply
The Naked Scooter
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 4Ghz@1.24V Asus P6T Deluxe eVGA GTX 285 12GB Patriot DDR3-1600 8-8-8-24@1.65V 
Hard DriveOptical DriveOSMonitor
2x640GB WD in RAID 0+1TB Seagate 7200.11 HP LightScribe DVD Burner Windows 7 Ultimate x64 22" Samsung 720p HDTV 
KeyboardPowerCaseMouse
Logitech G15 1000W Antec TruePower Quattro CoolerMaster ATCS 840 Logitech G9x 
  hide details  
Reply
post #36 of 53
Quote:
Originally Posted by beret9987 View Post
Okay buying T-line! I can probably find something to seal it with at my hardware store. I'm gonna go coolant shopping on line later tonight. I plan on using the metal hose clamps with the ones with the screws on them. It's like a #7 right? Ordering GPU block tonight and I'll buy the stinger tomorrow hopfully. How long does it take to get one made? Oh and buying rad box from SVC probably with 120mm fans off of ebay.
DD has a little brass plug you can buy to stick in your hose and seal it, or just make it over long and fold it up and zip-tie it etc.......I don't know if they are #7, just make sure it will fit at least a 5/8 tube....
I got the V-6 Stinger and it took a couple of weeks, well worth it...are you getting the Standard or the V-6? ......
I can tell your getting the WC fever, kind of fun ain't it..........The best advise I can give you...Take your time setting it up.....Don't rush it...Clean and leak test it......If you do that you should have no problems ....
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 4545Mhz*9 w/1.29V DFI DK P45 XFX 8800 GS D9GKX & D9GMH 
Hard DriveOptical DriveOSPower
2x Seagate 160 Perp. RD-1 2x Asus Vista Premium Corsair HX 620 
Case
Open Bench 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 4545Mhz*9 w/1.29V DFI DK P45 XFX 8800 GS D9GKX & D9GMH 
Hard DriveOptical DriveOSPower
2x Seagate 160 Perp. RD-1 2x Asus Vista Premium Corsair HX 620 
Case
Open Bench 
  hide details  
Reply
post #37 of 53
Thread Starter 
Lol. What can I say! I've been thinking about it all day... Added the little brass plug and T-Line. Total after the shopping at the DD store, leaves me with 150 dollars to buy my fans,coolant,radbox,stinger standard(he said it performed the same but the V-6 just looked WAY COOLER which it does) and my GPU block and all that distilled water. I think I can fit all of it in but I can't assemble this until my christmas break anyways but I just want the parts! I'm in a consumerism type of mood today i guess.

*EDIT* Have any suggestions for priming the pump and cleaning out the radiator?
The Naked Scooter
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 4Ghz@1.24V Asus P6T Deluxe eVGA GTX 285 12GB Patriot DDR3-1600 8-8-8-24@1.65V 
Hard DriveOptical DriveOSMonitor
2x640GB WD in RAID 0+1TB Seagate 7200.11 HP LightScribe DVD Burner Windows 7 Ultimate x64 22" Samsung 720p HDTV 
KeyboardPowerCaseMouse
Logitech G15 1000W Antec TruePower Quattro CoolerMaster ATCS 840 Logitech G9x 
  hide details  
Reply
The Naked Scooter
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 4Ghz@1.24V Asus P6T Deluxe eVGA GTX 285 12GB Patriot DDR3-1600 8-8-8-24@1.65V 
Hard DriveOptical DriveOSMonitor
2x640GB WD in RAID 0+1TB Seagate 7200.11 HP LightScribe DVD Burner Windows 7 Ultimate x64 22" Samsung 720p HDTV 
KeyboardPowerCaseMouse
Logitech G15 1000W Antec TruePower Quattro CoolerMaster ATCS 840 Logitech G9x 
  hide details  
Reply
post #38 of 53
My loop cools the CPU, NB, SB, and 7900GT's in SLI. I use one dual 120mm rad and one single 120mm rad with the one pump. My X2 4800 vcore is at 1.47 and the GPU's are volt modded at 1.5. My room temp is 72F or 22.2C. These are my idle temps. Load temps on the CPU top out at 46C. The GPU's stay around 58 and 62 C while benchmarking.

Everything was purchased from Danger Den.



post #39 of 53
Thread Starter 
Quote:
Originally Posted by Biomech View Post
My loop cools the CPU, NB, SB, and 7900GT's in SLI. I use one dual 120mm rad and one single 120mm rad with the one pump. My X2 4800 vcore is at 1.47 and the GPU's are volt modded at 1.5. My room temp is 72F or 22.2C. These are my idle temps. Load temps on the CPU top out at 46C. The GPU's stay around 58 and 62 C while benchmarking.

Everything was purchased from Danger Den.
Nice. I'll probably get temps like that since I'm not running as much on my loop.
The Naked Scooter
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 4Ghz@1.24V Asus P6T Deluxe eVGA GTX 285 12GB Patriot DDR3-1600 8-8-8-24@1.65V 
Hard DriveOptical DriveOSMonitor
2x640GB WD in RAID 0+1TB Seagate 7200.11 HP LightScribe DVD Burner Windows 7 Ultimate x64 22" Samsung 720p HDTV 
KeyboardPowerCaseMouse
Logitech G15 1000W Antec TruePower Quattro CoolerMaster ATCS 840 Logitech G9x 
  hide details  
Reply
The Naked Scooter
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 4Ghz@1.24V Asus P6T Deluxe eVGA GTX 285 12GB Patriot DDR3-1600 8-8-8-24@1.65V 
Hard DriveOptical DriveOSMonitor
2x640GB WD in RAID 0+1TB Seagate 7200.11 HP LightScribe DVD Burner Windows 7 Ultimate x64 22" Samsung 720p HDTV 
KeyboardPowerCaseMouse
Logitech G15 1000W Antec TruePower Quattro CoolerMaster ATCS 840 Logitech G9x 
  hide details  
Reply
post #40 of 53
Quote:
Originally Posted by beret9987 View Post
Lol. What can I say! I've been thinking about it all day... Added the little brass plug and T-Line. Total after the shopping at the DD store, leaves me with 150 dollars to buy my fans,coolant,radbox,stinger standard(he said it performed the same but the V-6 just looked WAY COOLER which it does) and my GPU block and all that distilled water. I think I can fit all of it in but I can't assemble this until my christmas break anyways but I just want the parts! I'm in a consumerism type of mood today i guess.

*EDIT* Have any suggestions for priming the pump and cleaning out the radiator?

I always leave my pump loose till I fill my loop...Then I kind of shake it and move it around some to get the air out and water in, then go ahead and bolt it down.......Then just start flipping your power button on and off a few times till it picks up water...You will be able to hear the difference in sound when it picks up...
Look back in the post where I told you how to clean, I have the rad in it to......
When you get all your parts this stuff will start making more sense to you...You'll be able to see how it all goes togather...
Have some fun with it Buddy........It's a lot of fun.....
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 4545Mhz*9 w/1.29V DFI DK P45 XFX 8800 GS D9GKX & D9GMH 
Hard DriveOptical DriveOSPower
2x Seagate 160 Perp. RD-1 2x Asus Vista Premium Corsair HX 620 
Case
Open Bench 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 4545Mhz*9 w/1.29V DFI DK P45 XFX 8800 GS D9GKX & D9GMH 
Hard DriveOptical DriveOSPower
2x Seagate 160 Perp. RD-1 2x Asus Vista Premium Corsair HX 620 
Case
Open Bench 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Need good chipset waterblock and possibly custom WC Rig