OK, firstly is your res set up for series operation?
I seem to remember that that res can do both series and parallel, you have to change a plug over or something
use a 180° connector. Have a read of the instruction manual and double check that it is set up properly.
Secondly bay reservoirs can be difficult to bleed - just one of those things. Only connect one pump, fill the res, run the pump until the water level drops, turn the pump off and top up the res. Repeat until water is flowing round the loop.
Have a look at the res manual here
, make sure that you have combined the chambers and set up for series as described in step 3. Also install the acrylic bypass piece as described in step 4.
Looks like that is a really complicated reservoir.Edited by GingerJohn - 12/4/12 at 11:09am