Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › TATH \ Caselabs TH 10 + Pedestal "Hill 7.9"
New Posts  All Forums:Forum Nav:

TATH \ Caselabs TH 10 + Pedestal "Hill 7.9" - Page 205

post #2041 of 2245
I'm glad it's working. But my best guess would be that the order of the blocks really didn't have anything to do with it. My guess is that some trapped air was released while you were swapping things out, and now everything if flowing freely. I'll bet if you swapped the block order back to how it was, that you would still get good flow.

But regardless....glad you have things humming along now.
post #2042 of 2245
Thread Starter 
Quote:
Originally Posted by cpachris View Post

I'm glad it's working. But my best guess would be that the order of the blocks really didn't have anything to do with it. My guess is that some trapped air was released while you were swapping things out, and now everything if flowing freely. I'll bet if you swapped the block order back to how it was, that you would still get good flow.

But regardless....glad you have things humming along now.

You are probably right about that. I notice that after the pomps the flow stopt and when i shut down the pomps the flow shoot back like a rocket.
After changing the route it sudenly start to flow.
Ha again you must be right. For now i keep it this way alto i like to see if i can make smaller bends. Then il be able to put in more hard tubing and less connectors. Need to practice that. I am just a beginner "FNG" on watercooling. biggrin.gif
post #2043 of 2245
Thread Starter 
I wonder if i get more power from the other power surply.
I am saying this because right now i am using a old PSU for testing and on the aquasuite i see that the max of the voltage is 11,4 volt instead of 12. I try this tommorow also with my 1200 watt how much it gives "must be exact 12 volt i guess.

So for the pomps i might be also like the fans 11,4 volt is less power. I am not a elektrision "is this the right word".rolleyes.gif
post #2044 of 2245
Where in Aquasuite is it showing 11.4V? On the Fan tab? That's normal, you won't see 12v, there's always a little loss.

Glad you got the flow thing worked out!
post #2045 of 2245
Thread Starter 
I finished the power cable for the 3 Noiseblocker 140mm fans that cooling the 2 Aquero's in the pedestel.

https://www.youtube.com/watch?v=DKup0CFcXrs&feature=youtu.be

The most of the evening i was sorting out al the wires that i have. I went to the shop to buy extra boxes to store al the little parts.

I puhed the pomp wires at the back down into the pedestel. And the other wires are under the black box.
For under the acrylic pomp bracket i am going to make a black strip so you wont see the yellow dampers.

Thibking back on the problems that i had with the trapt air "yes Chris you where right" i am having a sort of jetlag "need more sleep". So this weekend i will work on the build but not that many hours. Yes i want the build finish but i am not in a hurry.



I have 140 mm fanguards but i dont now if i shout put them on. At least not the shinny black ones. I have to paint them first to match the color of the build.

What do you think put them on or not. rolleyes.gif



Still playing with the blue leds. Not shure wich ones i put in the big or the small ones. Or no leds.
I was testing out the fans and take a look at the power consumption "What 238 watts" ppfffffffff that cant be for just 3 fans.
After following the power cable i found out that my laptop and all the lightings on my desk where also attatcht.



Just a nother piece of the puzzle in whoot i say.




Lets wait and see what tommorow brings.

O yes "Happy Easter"

O yes you like this one !!!



I prefer this Easter bunny biggrin.gif

post #2046 of 2245
I like the 2nd easter bunny also
post #2047 of 2245
Thread Starter 
Yes whe al like the easter buny.

No time to waist "have to build".
What did i do today beside sleeping out and having coffee.
I took a ggood and long look at my build and thouth "shi .. still not finished" . I trying to making a plan where excactly i am going to put the usb- hubs. I need the access them if i need it. Not figer it out yet.
There are many things i have to do so i just pick up something i like to do today.

What did i do:

- sleeving the 3mm leds for in my EK waterblock "yes i also forgot something \ forgot the top block Ï get you later".
- changed the tubing from the top radiator to my gpu block "took out 2 90 degree's connectors"
- took out one tube between the gpu now i cn plug in the audio cable.

**** i think she puts me on a dieet "I guess it is the revenge of the easter bunny" now i can have a beer whit that.



Sleeving the wires from the leds a bit.



Here you see i changed:
- tubing from rad to gpu;
- removing right tube bewteen the gpu's;
- putting in a valve instead of a quick discconect.



Right now i am doing a leaktest again because i changed a few things.



The leds of the gpu block wil take som more time because the holes (original ) ar not the same and the 3mm leds are not fitting so good. Because it is still light i wait until it is getting dark to see if i need to drill a few more holes to light up the gpu blocks better.









Untill whe meet again thumb.gif
post #2048 of 2245
dats gorgeous !!! dat blue !!! my o my !! I cant wait.

meantime, push that plate o food over, looks good enuf to wolf down biggrin.gif
Stufzinader
(18 items)
 
Calibri
(15 items)
 
PapaPayne
(16 items)
 
CPUMotherboardGraphicsRAM
Intel i7-2600K ASUS P8Z68-V PRO/GEN3 EVGA SuperClocked 015-P3-1582-AR GeForce GTX 580 G.SKILL Sniper 4x4 F3-12800CL9D-8GBSR2 
Hard DriveHard DriveHard DriveOptical Drive
Crucial M4 CT256M4SSD2 WD7501AALS Caviar Black WD5002AALX Caviar Black Lite-On iHAS124-04 
CoolingCoolingOSMonitor
Noctua NH-D14 Silverstone AP121-L x 6 Win 7 64bit HP ZR2440w 
KeyboardPowerCaseMouse
Ozone Gaming Gear Strike Mechanical Gaming Keyb... SeaSonic X Series X-850 SilverStone Temjin Series SST-TJ04B-EW Logitech G9x Black Two modes scroll USB Wired L... 
Mouse PadMouse Pad
Zowie Gear G-TF Speed e-Sport Gaming Mouse Pad Ratzpad 
CPUMotherboardGraphicsRAM
Intel i7-3770K ASUS P8Z77-V DELUXE LGA 1155 EVGA 02G-P4-2683-KR GeForce GTX 680 Superclocked G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin ... 
Hard DriveHard DriveOptical DriveCooling
SAMSUNG 830 Series MZ-7PC256B/WW 2.5" 256GB Western Digital Caviar Black WD5002AALX 500GB 7... Lite-On iHAS124-04 COOLER MASTER Hyper 212 EVO 
OSMonitorKeyboardPower
Windows 7 64 bit HP ZR2440w  CM Storm QuickFire Rapid SGK-4000-GKCL1-US SeaSonic X-850 
CaseMouseMouse Pad
AZZA Genesis 9000 CSAZ-9000B Logictech G9x Zowie G-TF Spawn 
CPUMotherboardGraphicsRAM
Intel i7-3770K ASUS P8Z77-V DELUXE LGA 1155 EVGA 02G-P4-2683-KR GeForce GTX 680 Superclocked G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin ... 
Hard DriveHard DriveOptical DriveCooling
Crucial M4 256GB SATA III WD VelociRaptor 600GB 10000 RPM 32MB Cache SATA... LITE-ON DVD Burner XSPC Raystorm Extreme Universal CPU Watercoolin... 
CoolingCoolingCoolingOS
EVGA GTX 680 Hydro Copper Waterblock Lamptron FC8 Fan Controller GELID Solutions Gamer Fan WING 12 Blue UV x 4 Windows 7 Ultimate 
KeyboardPowerCaseOther
SteelSeries Merc Stealth OCZ Fatal1ty 1000W Individually-Sleeved Modular... NZXT SWITCH 810 Gun-Metal PPCS Luxury Single Braided Cold Cathode Kit - U... 
  hide details  
Reply
Stufzinader
(18 items)
 
Calibri
(15 items)
 
PapaPayne
(16 items)
 
CPUMotherboardGraphicsRAM
Intel i7-2600K ASUS P8Z68-V PRO/GEN3 EVGA SuperClocked 015-P3-1582-AR GeForce GTX 580 G.SKILL Sniper 4x4 F3-12800CL9D-8GBSR2 
Hard DriveHard DriveHard DriveOptical Drive
Crucial M4 CT256M4SSD2 WD7501AALS Caviar Black WD5002AALX Caviar Black Lite-On iHAS124-04 
CoolingCoolingOSMonitor
Noctua NH-D14 Silverstone AP121-L x 6 Win 7 64bit HP ZR2440w 
KeyboardPowerCaseMouse
Ozone Gaming Gear Strike Mechanical Gaming Keyb... SeaSonic X Series X-850 SilverStone Temjin Series SST-TJ04B-EW Logitech G9x Black Two modes scroll USB Wired L... 
Mouse PadMouse Pad
Zowie Gear G-TF Speed e-Sport Gaming Mouse Pad Ratzpad 
CPUMotherboardGraphicsRAM
Intel i7-3770K ASUS P8Z77-V DELUXE LGA 1155 EVGA 02G-P4-2683-KR GeForce GTX 680 Superclocked G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin ... 
Hard DriveHard DriveOptical DriveCooling
SAMSUNG 830 Series MZ-7PC256B/WW 2.5" 256GB Western Digital Caviar Black WD5002AALX 500GB 7... Lite-On iHAS124-04 COOLER MASTER Hyper 212 EVO 
OSMonitorKeyboardPower
Windows 7 64 bit HP ZR2440w  CM Storm QuickFire Rapid SGK-4000-GKCL1-US SeaSonic X-850 
CaseMouseMouse Pad
AZZA Genesis 9000 CSAZ-9000B Logictech G9x Zowie G-TF Spawn 
CPUMotherboardGraphicsRAM
Intel i7-3770K ASUS P8Z77-V DELUXE LGA 1155 EVGA 02G-P4-2683-KR GeForce GTX 680 Superclocked G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin ... 
Hard DriveHard DriveOptical DriveCooling
Crucial M4 256GB SATA III WD VelociRaptor 600GB 10000 RPM 32MB Cache SATA... LITE-ON DVD Burner XSPC Raystorm Extreme Universal CPU Watercoolin... 
CoolingCoolingCoolingOS
EVGA GTX 680 Hydro Copper Waterblock Lamptron FC8 Fan Controller GELID Solutions Gamer Fan WING 12 Blue UV x 4 Windows 7 Ultimate 
KeyboardPowerCaseOther
SteelSeries Merc Stealth OCZ Fatal1ty 1000W Individually-Sleeved Modular... NZXT SWITCH 810 Gun-Metal PPCS Luxury Single Braided Cold Cathode Kit - U... 
  hide details  
Reply
post #2049 of 2245
Wow really looks great with all the blue lit up! It's starting to come together nicely.
post #2050 of 2245
Yep, looking good!
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Build Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › TATH \ Caselabs TH 10 + Pedestal "Hill 7.9"