Originally Posted by mandrix
OK. Just wanted you to be aware that with two Aquaero Pro, you can not run one as a slave. But you can run both independently, they will both show up in the software as separate devices.
Actually I see few advantages to running a slave unit anyway.
hi mandrix thats new for me . then i have all the functions. i was thinking to use one aquaero for the upper part of the case with:
1 flow sensor unit
1 intern temp sensor
4 PA ultra (2 for the fans and 2 for the pumps)
1 Aqualis res
and the same for the pedestel.
Now i think of it mayby i can connect an extra PA for my leds (i have to find out how many watt the are). the are 12 volt.
Just finished putting the second coolblock on the 2e Aquearo 5 Pro. i put it in the case (top) so i now what holes i have to make for the loop and wiring to the back. All the wiring is going to the back (right side) front.
Many things to find out but i take sufficient time to check things out.
before i start with the loop i want to do the fans and the controlling of them first. i intent to use my wifes pc for try out tru the Aquasuite software.