Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › TATH \ Caselabs TH 10 + Pedestal "Hill 7.9"
New Posts  All Forums:Forum Nav:

TATH \ Caselabs TH 10 + Pedestal "Hill 7.9" - Page 40

post #391 of 2245
Thread Starter 
Quote:
Originally Posted by seross69 View Post

That does look so good.. thumb.gif And you did all the etching by hand that is amazing!! thumb.gifthumb.gifthumb.gif

Hi Serros69 (brother), counting down the days. And already planning you next move.
Love your new card. I wunder if you read the test before you got them. I read that the GTX 690 are slide faster on gaming. I mostly buy things after i read the tests.
If you build case like whe do now i think it doesnt mather if the price for a component is higher.
I'm satisfied with the panel. In my mind it seems it took ages to finish bud i'm glad i did. Sometimes you loos time with trying things out. Thats oke as long it dont cost to mutch.

I stil want to now a thing about you build. Are you building in one system case 4 systems or are you building 4 separate systems.

More updates later this week


.
post #392 of 2245
Quote:
Originally Posted by TATH View Post

Hi Mandrix,

Just finihed 50% of the light panel. The top panel (opaal looks good) bud i dont now yet if i keep it. I like the bleu light. And i dont now if i get it out easy if the pumps and res are already in.
I think i wil finish this week with the panel for sure. yesterday i just the connectors for the leds bud i also solder a piece so i thinking of soldering al the leds and sleeve the corners.

I'm also have to find out i need to make more then onen cable for the:

- one cable for the power surply of the 2 Aquero's
- one cable for the 4 PA2's( 16 fans) and 2 pumps

I made a new powerharnes befor for the PA2's (1,5 mm)

I intend to use a 1200 watt i1200 corsair for the motherbord and graphics and the 700 watt for the lightning, 32 fans, 4 pumps, and 4 ssd an 2 3,5" disks.
this is a part i dont sorted out yet.

I also need to get in contact with Seanamus for his switches he uses. it seem to me that he uses the switches to switch of his Aquero. (i already orderd the switches but the are on backorder just like the extra 90 degree bitspower connectors).

i notice you go very fast at the moment. great pictures skill you have. I got a Pentax 5K but need time to sort things out.

I have a question for you:

On the ledcontroller is a connection (power surply) 12 volt . I used a 30 wat 12 volt external psu ( i wil use this psu for the leds i want to plant in my office) . Do you think i can use a 12 volt from my spare
psu to feed the controller.

aditional info:
the remote control hase a:
- on and off switch
- can dim

So i thought i dont need a FC8 to feed and control the leds because:)smile.gif the remote controller does this.

More later this week.thumb.gif

Greatings from a sunny Holland

well I bet it is not as sunny as Indonesia?? biggrin.gif
post #393 of 2245
Thread Starter 
Quote:
Originally Posted by toxic11b View Post

Digital Micrometer. Use them mainly to measure brake thickness on rotors / brakes for vehicles.... Can be used for other things also =D

I'm sorry if someone already posted that. I'm reading from start to finish to catch up .. Very good job

ha thank enjoy reading the buildl:thumb:og.
post #394 of 2245
Thread Starter 
Quote:
Originally Posted by seross69 View Post

well I bet it is not as sunny as Indonesia?? biggrin.gif

I can inmagin it, i now what its like when you com out the airplane in a foreign country and get the warm blanket on your fase.
post #395 of 2245
A warm wet blanket.. because of the high humidity
post #396 of 2245
Thread Starter 
Update 58 "opaal acryl"

I dont now what to think about it. Need more stuf in the case and put the windows in.
More research is needed befor i decide if the opaal panel stays.

Al colors from the rainbow can be made with the controller.
Need subtle light not a sun banch. More later !!,

Stil 50% of the leds in.









More later
post #397 of 2245
Looking good.... And like you said really hard to tell on the amount of light until you get more gear in!!
post #398 of 2245
Thread Starter 
Quote:
Originally Posted by seross69 View Post

Looking good.... And like you said really hard to tell on the amount of light until you get more gear in!!

Need to stick to my first plan "first the pedestel and then up. So i removed the lightning panel en took the case and pedestel to the back to work on the sleaving and the power harnes for the Aquero's.

drilt a few holes to pas tru the wires from the pa2's. wanted to check the pa2's befor puting them in. from 2 pa2's i dont get power sh......... . i put them on a usb cable and power cable so i can check them.
No respons. firmware oke 1006. At the back on the fauld ones is a sticker 1003. I send one back a few weeks ago. Stil 2 short now. I updated the firmware befor but did not check if the give power to the fans.
mad.gifmad.gif.

Have to order 2 more tomorrow .
post #399 of 2245
Well you are up late or early not sure which?? 7am where I am and would be like 2 am where you are right??
post #400 of 2245
Thread Starter 
Quote:
Originally Posted by seross69 View Post

Well you are up late or early not sure which?? 7am where I am and would be like 2 am where you are right??

its now 01:00 at night
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Build Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › TATH \ Caselabs TH 10 + Pedestal "Hill 7.9"