Originally Posted by s3tfree
amazing build man - love the blue color in those tubes. are you plannig something against corosion?
until nowe i dont,
if you mean inside then i must say mayby i change the hos for acryl tube. a few builders over here use them but you have to resize them so the dont leak. i wanted to make a copie off the build from singularity computers project beast II but in the build i changed som items like the pump brackets and the rads. i still have to do many things. i dont want to rush the build . ( i take all the time to check things out i have seen many build logs from the overclock net). i also read that the tygon tube stains after a while becouse of that i bought the tygon e-1000 after som mods i changed them back again for the tygon r3603 because i find the wall thiknes not good when you look at the you tube film from singularity i think update 6 you see that the bitspower leaves a gap of ± 1 mil because of the thicknes of the tube. if you use the e1000 tube from tygon you will see that the wall thicknes is thinner and i find it tricky so i changed te hose again.
I like the chrome and the bleu in combination i still hav to do some lightning. i have seen that the koollance blocks for the motherboard have no holes for leds some howe i will light them up later it wil take some time to figger out the best way to do. What i dont like on my build is the dvd drive (white) and i wil change that out for an external blueray one.
i put a link from a friend ho makes his one tubing
sorry for my bad englisch but i'm Dutch
http://forum.highflow.nl/f34/danger-den-double-wide-build-naam-moet-ik-nog-verzinnen-13609/index3.htmlEdited by TATH - 12/29/12 at 12:46pm