Update 72 "more work on the panels"
I Finished the left top panel. Put a few clamps on the panels and drild a few holes. Have to do one more for the flow
from the pomp at front. To see if the panels still fit when the moterboard is in i slide the tray in "looks good i think".
I decide to purchase more panels for the back.
Now its time for the back. I want to work on the pumps. First i had to search for the rubber dampers for the pumps.
After i pre mount the rubber vibration on the acryl plate i fit in. After a few minutes watching the panels i thought that it be harder to acces the pedestel when the acryl panel is in. I think i take it out. I'm going to mount the duall pumps on the 2e and 3e fan hole because then i have more room for the connection from the res to the back pumps.
When i first finish the panel i thought that if i make a double panel i can work away the cables better.
I also put the corsaur psu axi 1200 in to have a look how much room do i have to work with. I also tried the phobya
double start cable for the twu psu's "it dont fit\ another obstacle to take".
I pre installed the flow device it fits oke "have to make a new acrylic mount for it Si i can connect the flowmeter to the back off the case.
Also thinking of making more drainage connections to the bottom so i can drain the system by turning a few valves.
And yes also pre installed. Planning cost time.
More tomorrow. Dinner is ready.
placed a order for the rest of the acryl i needed so i can installing all the rest.
Orderdatum: zaterdag 22 juni, 2013
1 x 12672 - plexiglas 5mm zwart - 59,0 x 23,0 cm = € 19.57
1 x 12672 - plexiglas 5mm zwart - 16,0 x 43,0 cm = € 10.42
2 x 12672 - plexiglas 5mm zwart - 42,0 x 7,0 cm = € 10.08
2 x 12672 - plexiglas 5mm zwart - 59,0 x 19,0 cm = € 32.69
1 x 12672 - plexiglas 5mm zwart - 13,0 x 36,0 cm = € 7.42
I was surfing the net and was thinking about my wishlist:
2 x titan
2 x waterblock XSPC
4 x OCZ Vector
64 gb dominator
Even with the budget about 400 euro a month its going to take me one year to finish.
I thinking of devide the build in 2. cards and monitor next year and the rest this year so i have the opportunity to play games and work with Hill 7.9. i already spent over 11.000
euro and need about 5000 to finish. Still love to build.
So more tomorrow and keep watching Edited by TATH - 6/22/13 at 2:23pm