Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › TATH \ Caselabs TH 10 + Pedestal "Hill 7.9"
New Posts  All Forums:Forum Nav:

TATH \ Caselabs TH 10 + Pedestal "Hill 7.9" - Page 65

post #641 of 2241
Thread Starter 
Update "Anti cyclone, cleaning res, connecting right res"

Friday i purchase new glue because the other bottle is not suitable for the job.
I thought lets give it a try.
It works grate but lookout your fingers also stick in seconds to the object.



Have to do som more work on the cover. I want to at a few support pieces and glue them on.



There is no real need of clamping the support piece but i thought when i put pressure on it it sticks better. rolleyes.gif




I took out the baydrive covers to get more acces to the right side. I am thinking of putting a clear frontpannel in because i dont like the view of the baycovers from the inside and the aluminium pins. What do you think "Do or Dont"!




I had to take of the "Borium glass" to acces the bottom to put in the anti clone plate. Because one reservoir was not in the case yet that one was easy to do the other took a few more minutes. Sinds the last leak test there was a little dirt on the inside of the glas i cleant the glass also.



Made the final connection of the second res.



I connect two loos wires with a 9volt battery on the back to see if the leds still work.



Did just verry little things on the case because i had to work overtime.

But never the less "verry verry little progres" took some measurements for more acrylic.

See ya next time.

thumb.gifthumb.gif
post #642 of 2241
Thread Starter 
One more shot in detail.
Zoom in and see how the dust from filing the acrylic lights up on the back.
Need a good clean befor finishing this build. rolleyes.gif

post #643 of 2241
Smoked acrylic front panel with leds running along the sides would look great. cheers.gif
CaseLabs T10
(23 items)
 
CaseLabs TH10
(26 items)
 
 
CPUMotherboardGraphicsRAM
AMD Phenom II X6 1090T ASUS Crosshair III Formula x2 SAPPHIRE Radeon HD 5870s 8GB Corsair Dominator GT  
Hard DriveHard DriveOptical DriveCooling
120GB Intel 510 SSD - 256GB Crucial M4 SSD x2 1TB Western Digital Caviar Greens Pioneer BDR-205 BD/DVD  EK-Supreme LTX 
CoolingCoolingCoolingCooling
x2 EK-FC5870  x2 XSPC RX360 Radiators EK-RAM Dominator x20 Yate Loon 120mm Case Fans 
CoolingCoolingCoolingOS
EK-FC Bridge DUAL Parallel 3-Slot  x2 XSPC Acrylic Dual 5.25" Bay Reservoirs NZXT Sentry LX 5.25" Dual Bay Fan Controller Windows 7 Ultimate x64 
MonitorKeyboardPowerCase
x2 25.5" ASUS VW266Hs Logitech G15 Corsair AX1200W - White CaseLabs T10 - White 
MouseAudio
Cooler Master Sentinel ASUS Xonar Xense 
CPUMotherboardGraphicsRAM
Core i7 980x Extreme @ 4.5Ghz ASUS Rampage III Black Edition ASUS GTX 480 TRI-SLI 12GB Corsair Dominator GT @1600MHz 8-8-8-24 1T 
Hard DriveHard DriveHard DriveHard Drive
OCZ Vertex 2 120GB SSD x2 OCZ Vertex 3 120GB SSD  1TB Western Digital Caviar green 500GB Western Digital Scorpio Blue 
Hard DriveOptical DriveCoolingCooling
3TB Seagate Baracuda LG Super Multi Blue BD/DVD Burner EK-Supreme HF - Rev 2 x3 EK-FC480  
CoolingCoolingCoolingCooling
x3 EK-FC480 GTX Backplates EK-FC Bridge TRIPLE Parallel EK-RAM Dominator x3 XSPC RX 480 Radiators 
CoolingCoolingOSMonitor
x1 XSPC RS 360 Radiators x2 EK Multi Option Advanced 400 Reservoirs Windows 7 Ultimate x64 (2) Dell E2210H 22" Widescreens 
KeyboardPowerCaseMouse
Logitec G15 x2 Corsair AX1200W CaseLabs Magnum TH10 - Matte Black CoolerMaster Sentinel 
Audio
Creative Labs Titanium HD 
  hide details  
Reply
CaseLabs T10
(23 items)
 
CaseLabs TH10
(26 items)
 
 
CPUMotherboardGraphicsRAM
AMD Phenom II X6 1090T ASUS Crosshair III Formula x2 SAPPHIRE Radeon HD 5870s 8GB Corsair Dominator GT  
Hard DriveHard DriveOptical DriveCooling
120GB Intel 510 SSD - 256GB Crucial M4 SSD x2 1TB Western Digital Caviar Greens Pioneer BDR-205 BD/DVD  EK-Supreme LTX 
CoolingCoolingCoolingCooling
x2 EK-FC5870  x2 XSPC RX360 Radiators EK-RAM Dominator x20 Yate Loon 120mm Case Fans 
CoolingCoolingCoolingOS
EK-FC Bridge DUAL Parallel 3-Slot  x2 XSPC Acrylic Dual 5.25" Bay Reservoirs NZXT Sentry LX 5.25" Dual Bay Fan Controller Windows 7 Ultimate x64 
MonitorKeyboardPowerCase
x2 25.5" ASUS VW266Hs Logitech G15 Corsair AX1200W - White CaseLabs T10 - White 
MouseAudio
Cooler Master Sentinel ASUS Xonar Xense 
CPUMotherboardGraphicsRAM
Core i7 980x Extreme @ 4.5Ghz ASUS Rampage III Black Edition ASUS GTX 480 TRI-SLI 12GB Corsair Dominator GT @1600MHz 8-8-8-24 1T 
Hard DriveHard DriveHard DriveHard Drive
OCZ Vertex 2 120GB SSD x2 OCZ Vertex 3 120GB SSD  1TB Western Digital Caviar green 500GB Western Digital Scorpio Blue 
Hard DriveOptical DriveCoolingCooling
3TB Seagate Baracuda LG Super Multi Blue BD/DVD Burner EK-Supreme HF - Rev 2 x3 EK-FC480  
CoolingCoolingCoolingCooling
x3 EK-FC480 GTX Backplates EK-FC Bridge TRIPLE Parallel EK-RAM Dominator x3 XSPC RX 480 Radiators 
CoolingCoolingOSMonitor
x1 XSPC RS 360 Radiators x2 EK Multi Option Advanced 400 Reservoirs Windows 7 Ultimate x64 (2) Dell E2210H 22" Widescreens 
KeyboardPowerCaseMouse
Logitec G15 x2 Corsair AX1200W CaseLabs Magnum TH10 - Matte Black CoolerMaster Sentinel 
Audio
Creative Labs Titanium HD 
  hide details  
Reply
post #644 of 2241
Thread Starter 
Quote:
Originally Posted by TPE-331 View Post

Smoked acrylic front panel with leds running along the sides would look great. cheers.gif

Oke then there is more work for me.
post #645 of 2241
Quote:
Originally Posted by TATH View Post

Oke then there is more work for me.

Hi Henry, I did something similar with the front panel of the bottom pedestal of my case. Notice the smoked acrylic window. I still need to mount the leds. smile.gif

CaseLabs T10
(23 items)
 
CaseLabs TH10
(26 items)
 
 
CPUMotherboardGraphicsRAM
AMD Phenom II X6 1090T ASUS Crosshair III Formula x2 SAPPHIRE Radeon HD 5870s 8GB Corsair Dominator GT  
Hard DriveHard DriveOptical DriveCooling
120GB Intel 510 SSD - 256GB Crucial M4 SSD x2 1TB Western Digital Caviar Greens Pioneer BDR-205 BD/DVD  EK-Supreme LTX 
CoolingCoolingCoolingCooling
x2 EK-FC5870  x2 XSPC RX360 Radiators EK-RAM Dominator x20 Yate Loon 120mm Case Fans 
CoolingCoolingCoolingOS
EK-FC Bridge DUAL Parallel 3-Slot  x2 XSPC Acrylic Dual 5.25" Bay Reservoirs NZXT Sentry LX 5.25" Dual Bay Fan Controller Windows 7 Ultimate x64 
MonitorKeyboardPowerCase
x2 25.5" ASUS VW266Hs Logitech G15 Corsair AX1200W - White CaseLabs T10 - White 
MouseAudio
Cooler Master Sentinel ASUS Xonar Xense 
CPUMotherboardGraphicsRAM
Core i7 980x Extreme @ 4.5Ghz ASUS Rampage III Black Edition ASUS GTX 480 TRI-SLI 12GB Corsair Dominator GT @1600MHz 8-8-8-24 1T 
Hard DriveHard DriveHard DriveHard Drive
OCZ Vertex 2 120GB SSD x2 OCZ Vertex 3 120GB SSD  1TB Western Digital Caviar green 500GB Western Digital Scorpio Blue 
Hard DriveOptical DriveCoolingCooling
3TB Seagate Baracuda LG Super Multi Blue BD/DVD Burner EK-Supreme HF - Rev 2 x3 EK-FC480  
CoolingCoolingCoolingCooling
x3 EK-FC480 GTX Backplates EK-FC Bridge TRIPLE Parallel EK-RAM Dominator x3 XSPC RX 480 Radiators 
CoolingCoolingOSMonitor
x1 XSPC RS 360 Radiators x2 EK Multi Option Advanced 400 Reservoirs Windows 7 Ultimate x64 (2) Dell E2210H 22" Widescreens 
KeyboardPowerCaseMouse
Logitec G15 x2 Corsair AX1200W CaseLabs Magnum TH10 - Matte Black CoolerMaster Sentinel 
Audio
Creative Labs Titanium HD 
  hide details  
Reply
CaseLabs T10
(23 items)
 
CaseLabs TH10
(26 items)
 
 
CPUMotherboardGraphicsRAM
AMD Phenom II X6 1090T ASUS Crosshair III Formula x2 SAPPHIRE Radeon HD 5870s 8GB Corsair Dominator GT  
Hard DriveHard DriveOptical DriveCooling
120GB Intel 510 SSD - 256GB Crucial M4 SSD x2 1TB Western Digital Caviar Greens Pioneer BDR-205 BD/DVD  EK-Supreme LTX 
CoolingCoolingCoolingCooling
x2 EK-FC5870  x2 XSPC RX360 Radiators EK-RAM Dominator x20 Yate Loon 120mm Case Fans 
CoolingCoolingCoolingOS
EK-FC Bridge DUAL Parallel 3-Slot  x2 XSPC Acrylic Dual 5.25" Bay Reservoirs NZXT Sentry LX 5.25" Dual Bay Fan Controller Windows 7 Ultimate x64 
MonitorKeyboardPowerCase
x2 25.5" ASUS VW266Hs Logitech G15 Corsair AX1200W - White CaseLabs T10 - White 
MouseAudio
Cooler Master Sentinel ASUS Xonar Xense 
CPUMotherboardGraphicsRAM
Core i7 980x Extreme @ 4.5Ghz ASUS Rampage III Black Edition ASUS GTX 480 TRI-SLI 12GB Corsair Dominator GT @1600MHz 8-8-8-24 1T 
Hard DriveHard DriveHard DriveHard Drive
OCZ Vertex 2 120GB SSD x2 OCZ Vertex 3 120GB SSD  1TB Western Digital Caviar green 500GB Western Digital Scorpio Blue 
Hard DriveOptical DriveCoolingCooling
3TB Seagate Baracuda LG Super Multi Blue BD/DVD Burner EK-Supreme HF - Rev 2 x3 EK-FC480  
CoolingCoolingCoolingCooling
x3 EK-FC480 GTX Backplates EK-FC Bridge TRIPLE Parallel EK-RAM Dominator x3 XSPC RX 480 Radiators 
CoolingCoolingOSMonitor
x1 XSPC RS 360 Radiators x2 EK Multi Option Advanced 400 Reservoirs Windows 7 Ultimate x64 (2) Dell E2210H 22" Widescreens 
KeyboardPowerCaseMouse
Logitec G15 x2 Corsair AX1200W CaseLabs Magnum TH10 - Matte Black CoolerMaster Sentinel 
Audio
Creative Labs Titanium HD 
  hide details  
Reply
post #646 of 2241
Thread Starter 
Quote:
Originally Posted by TPE-331 View Post

Hi Henry, I did something similar with the front panel of the bottom pedestal of my case. Notice the smoked acrylic window. I still need to mount the leds. smile.gif
Warning: Spoiler! (Click to show)


Thought you finished already with your build.
I got a big piece acrylic lying at the back so i wil look if it looks good on my case. "i wil make a picture of it".
Edited by TATH - 7/29/13 at 12:57pm
post #647 of 2241
Thread Starter 
Today i dismount the pumpmount.
I took the measurements for the new acrylic pumpmount.
I still have the original pumpmount so i put it under the pumpmount to see how it looks.



Another thing is the position of the psu. In both positions of the case the wiring dont get in line with the 24 pin of my motherboard *see bleu tape".
Normal a psu fits on the bottom but not in this case. I think i have a solution for the problem "i make a backplate "yes out off 5 mm acrylic and take over the measurement of the screw holes from the psu then i move the psu until it reach the right hight. From there i take again the measurements and make a new support plate who wil cover the to original holes of the psu.


To low. rolleyes.gif



To high mad.gif i wich caselabs makes a adjustable mount for the psu "HALLO any caselabs boys here "!!



I need the space at the right side of the pompunit to get down in to the pedestel \ and to com out.




Today i purchase new acrylic for the space beside the tilted motherboard.
On the top off the plate witch hold the moterboard i wil mount two hinges. and at the bottom i mount two adjustable standard who wil rest on the light panel.

Yes more planning.
I hope i get more time this week to make the acrylic pumpmount.

O yes almost forget to mention i have to wait for my friend to com back from vacation so he can make me 2 3mm thick aluminum plates (one reserve) wich hold the motherboard.

Thats al for today. thumb.gif
Edited by TATH - 7/29/13 at 1:28pm
post #648 of 2241
Looking great us usual Henry! You make me want to learn how to work with acrylic!
FireBox
(17 items)
 
 
CPUMotherboardGraphicsRAM
i7 3820 Asus Rampage IV Gene Zotac GTX 980 x 2 16 GB Corsair Dominator Platinum CL9 
Hard DriveHard DriveHard DriveCooling
256GB ADATA S900 x 2 RAID0 3TB x 2 RAID1 1TB x 2 single storage Custom water loop 
CoolingCoolingOSMonitor
XSPC EX360 rads x 1 / AlphaCool Monsta 360 x 2 ... Dual D5 variable pumps Windows 7 64 bit SP1 Samsung 27" LED 
KeyboardPowerCaseMouse
Logitech G110 Corsair AX750 Case Labs Magnum M8 Logitech G500 
  hide details  
Reply
FireBox
(17 items)
 
 
CPUMotherboardGraphicsRAM
i7 3820 Asus Rampage IV Gene Zotac GTX 980 x 2 16 GB Corsair Dominator Platinum CL9 
Hard DriveHard DriveHard DriveCooling
256GB ADATA S900 x 2 RAID0 3TB x 2 RAID1 1TB x 2 single storage Custom water loop 
CoolingCoolingOSMonitor
XSPC EX360 rads x 1 / AlphaCool Monsta 360 x 2 ... Dual D5 variable pumps Windows 7 64 bit SP1 Samsung 27" LED 
KeyboardPowerCaseMouse
Logitech G110 Corsair AX750 Case Labs Magnum M8 Logitech G500 
  hide details  
Reply
post #649 of 2241
Thread Starter 
Quote:
Originally Posted by Bart View Post

Looking great us usual Henry! You make me want to learn how to work with acrylic!
Hi Bart you can do it too. And there are many films on youtube about working with acrylic. biggrin.gif
post #650 of 2241
Quote:
Originally Posted by Bart View Post

Looking great us usual Henry! You make me want to learn how to work with acrylic!

Bart wanting to learn how to work with acrylic and I am just hoping i have learned how to make and sleeve my own cables....
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Build Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › TATH \ Caselabs TH 10 + Pedestal "Hill 7.9"