post #1 of 1
Thread Starter 
I recently purchase slim edition and the cable seems to look different from everyone else's cable.. I would appreciate some help from the people that have previously modded their cables or at least have some experience with this haha



Do I still snip the black wire? It doesn't appear to loop back as described in the tutorials that I found.. confused.gif

My intent is to use this as an audio output only cable.. I don't care if it ever outputs video again haha

Edit: I think I've figured it out. Instead of cutting a wire I simply taped over the first 4 or 5 pins (all of the pins before the red wire pin). It took a little trial and error -- I had it working but sound was only coming out of the right speaker so I trimmed the tape back and covered one less pin and that did the trick. It seems to be working fine now. No resets! Yay!
Edited by cipp - 12/5/12 at 11:13pm