Hello there, and thank you for reading my thread 
I'm looking to set up my first watercooling loop, and would like some help from you guys.
Components i want to cool are my 2600k and my two 7950's
so far i have picked out this block for my GPU
http://www.ebay.co.uk/itm/321000385009
and this for my CPU
http://www.ebay.co.uk/itm/190727867181
I already have a 360 rad, and im probably going to pick up a cheap second-hand mc355+XSPC top.
I was thining of getting an ex 240 crossflow as the 360mm will be mounted at the rear of my case so tube routing will be easier. although i can drop the crossflow for a diff rad if needed of course.
can you guys please help me complete this loop and keep it as close to £300-350 as possible? i understand thats a tall order, but this is for Christmas so i cant push it too much
i prefer ek for blocks because i would like to be able to see inside my loop, and i am planning on using mayhems dye
although i have my preferences, im not too stubborn, so if it cant be done using ek, please feel free to recommend other blocks guys
P.S i have 5 1200rpm fans, so they dont need to be included.
Edit: i would like to use the "EK-FC Bridge DUAL Parallel CSQ Plexi" too
Edited by jdc122 - 12/6/12 at 12:29pm
I'm looking to set up my first watercooling loop, and would like some help from you guys.
Components i want to cool are my 2600k and my two 7950's
so far i have picked out this block for my GPU
http://www.ebay.co.uk/itm/321000385009
and this for my CPU
http://www.ebay.co.uk/itm/190727867181
I already have a 360 rad, and im probably going to pick up a cheap second-hand mc355+XSPC top.
I was thining of getting an ex 240 crossflow as the 360mm will be mounted at the rear of my case so tube routing will be easier. although i can drop the crossflow for a diff rad if needed of course.
can you guys please help me complete this loop and keep it as close to £300-350 as possible? i understand thats a tall order, but this is for Christmas so i cant push it too much
i prefer ek for blocks because i would like to be able to see inside my loop, and i am planning on using mayhems dye
although i have my preferences, im not too stubborn, so if it cant be done using ek, please feel free to recommend other blocks guys
P.S i have 5 1200rpm fans, so they dont need to be included.
Edit: i would like to use the "EK-FC Bridge DUAL Parallel CSQ Plexi" too
Edited by jdc122 - 12/6/12 at 12:29pm
soon to be upgraded...
(13 items) |
|
soon to be upgraded...
(13 items) |
