Overclock.net › Forums › Intel › Intel CPUs › Help overclocking 3570K
New Posts  All Forums:Forum Nav:

Help overclocking 3570K - Page 5

post #41 of 93
Here is another screen shot of my voltage at 4.2ghz I have mine set up just like I have told you to do except I have a -.80 offset to give me 1.14v at 4.2ghz anything lower and I am not stable but my cpu seems to do well under 4.5ghz

4.0 needs 1.0v here 57c
4.2 needs 1.14v here 70c
4.3 needs 1.192v here 75c
4.4 needs 1.25v here I hit about 80c
4.5 needs 1.31v when I jump here I get into 90c on one of the cores during IBT and BF3 is in the mid 60's

post #42 of 93
Thread Starter 
well im going to test it out, with the llc at 4 and the offset -0.60. I went back again to triple check if the color changes when you increasing the volt and it never changed once and i kept going till it looped back around to the positive voltages
Gaming Rig
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5-3570K ASRock Z77 Extreme3  MSI Radeon RX 480 G.SKILL Ripjaws Series 8GB 
Hard DriveCoolingOSMonitor
1x 250 GB  COOLER MASTER V6 GT Windows 7 Ultimate 64bit Dell E172FP 17 inch LCD Samsung 42' PN42C450 
PowerCase
Real Power Pro 750W Cooler Master Storm Scout 
  hide details  
Reply
Gaming Rig
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5-3570K ASRock Z77 Extreme3  MSI Radeon RX 480 G.SKILL Ripjaws Series 8GB 
Hard DriveCoolingOSMonitor
1x 250 GB  COOLER MASTER V6 GT Windows 7 Ultimate 64bit Dell E172FP 17 inch LCD Samsung 42' PN42C450 
PowerCase
Real Power Pro 750W Cooler Master Storm Scout 
  hide details  
Reply
post #43 of 93
here are my bios settings








post #44 of 93
Quote:
Originally Posted by DotHacker666 View Post

well im going to test it out, with the llc at 4 and the offset -0.60. I went back again to triple check if the color changes when you increasing the volt and it never changed once and i kept going till it looped back around to the positive voltages

 

No, go down.  That is, -0.65, -0.70, -0.75, -0.80, etc.

 

If it's not doing it, then perhaps it only applies to his motherboard and not the motherboard you have (which is ok).

It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #45 of 93
Can the new ivy's not run 4.2 on auto? Might be easier to put everything on default and up the multi to 42 and stress to see what volts are being needed. Then figure out the offset voltage. Might be easier for him to figure out also. Just a suggestion tho.
jeffro37
(14 items)
 
755 websurfer
(9 items)
 
 
CPUMotherboardGraphicsRAM
I5-2500k MSI Z77A-G45 EVGA 780 sc Kingston Hyper X Genises 1600mhz 
Hard DriveHard DriveOptical DriveCooling
Samsung 840  Seagate 750gb sata III Samsung 24x DVD-RW Corsair H100 
OSMonitorKeyboardPower
Windows 10 pro Samsung 26" LCD Logitec 520 (wireless) Corsair TX 750 
CaseMouse
Coolermaster HAF X Logitec laser 
CPUMotherboardGraphicsRAM
Intel c2d e7400 xFx 750i sli ext. Evga 660 sc Kingston ddr2 800 
Hard DriveCoolingOSPower
WD 250 gb  hyper 212+ Windows 7 64 ultimate/ Ubuntu 13.04 Ultra X3 600w / full modular 
Case
Coolermaster Storm Enforcer 
  hide details  
Reply
jeffro37
(14 items)
 
755 websurfer
(9 items)
 
 
CPUMotherboardGraphicsRAM
I5-2500k MSI Z77A-G45 EVGA 780 sc Kingston Hyper X Genises 1600mhz 
Hard DriveHard DriveOptical DriveCooling
Samsung 840  Seagate 750gb sata III Samsung 24x DVD-RW Corsair H100 
OSMonitorKeyboardPower
Windows 10 pro Samsung 26" LCD Logitec 520 (wireless) Corsair TX 750 
CaseMouse
Coolermaster HAF X Logitec laser 
CPUMotherboardGraphicsRAM
Intel c2d e7400 xFx 750i sli ext. Evga 660 sc Kingston ddr2 800 
Hard DriveCoolingOSPower
WD 250 gb  hyper 212+ Windows 7 64 ultimate/ Ubuntu 13.04 Ultra X3 600w / full modular 
Case
Coolermaster Storm Enforcer 
  hide details  
Reply
post #46 of 93

Yeah, I admit that it's easier to do all overclocking with a manual voltage instead of an Offset.  That way, you can just focus on overclocking without having to babysit the Offset for every adjustment.  Then when you are all done and have determined it to be rock-solid stable with like a 12-24 stress test, you can switch to an Offset voltage.

It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #47 of 93
Quote:
Originally Posted by jeffro37 View Post

Can the new ivy's not run 4.2 on auto? Might be easier to put everything on default and up the multi to 42 and stress to see what volts are being needed. Then figure out the offset voltage. Might be easier for him to figure out also. Just a suggestion tho.

They can, and that's my suggestion as well. Take it one step at a time.
post #48 of 93
it can run on auto but will give it uneeded voltage the point is to get he lowest vcore possible so he will have the absolute lowest temps and stock voltage should be 1.15v so that is where to start. easy peasy

anyway in cpu-z click on mainboard and make sure your bios version is 1.20 the latest bios for your board, that thought just popped into my head as well.
post #49 of 93
Thread Starter 
Well I'm testing it right now but wat u said TwoCables is what I did and the color didn't change so I assume it's that it's his mobo that does that.
Gaming Rig
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5-3570K ASRock Z77 Extreme3  MSI Radeon RX 480 G.SKILL Ripjaws Series 8GB 
Hard DriveCoolingOSMonitor
1x 250 GB  COOLER MASTER V6 GT Windows 7 Ultimate 64bit Dell E172FP 17 inch LCD Samsung 42' PN42C450 
PowerCase
Real Power Pro 750W Cooler Master Storm Scout 
  hide details  
Reply
Gaming Rig
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5-3570K ASRock Z77 Extreme3  MSI Radeon RX 480 G.SKILL Ripjaws Series 8GB 
Hard DriveCoolingOSMonitor
1x 250 GB  COOLER MASTER V6 GT Windows 7 Ultimate 64bit Dell E172FP 17 inch LCD Samsung 42' PN42C450 
PowerCase
Real Power Pro 750W Cooler Master Storm Scout 
  hide details  
Reply
post #50 of 93
Quote:
Originally Posted by enigma7820 View Post

it can run on auto but will give it uneeded voltage the point is to get he lowest vcore possible so he will have the absolute lowest temps and stock voltage should be 1.15v so that is where to start. easy peasy
anyway in cpu-z click on mainboard and make sure your bios version is 1.20 the latest bios for your board, that thought just popped into my head as well.

But you don't need to do all that right from the beginning. The Auto voltage might be higher than absolutely needed, but it will be plenty safe (at least at that speed) and it'll let him get familiar with overclocking before he dives into offsets and other BIOS changes. Plenty of people are running 4.2 overclocks on full Auto with no problems at all. In my opinion, at 4.2, it is not worth worrying about reducing the voltage from 1.15 to 1.10 or something - the voltage is already so low it doesn't make any difference.
Edited by Forceman - 12/8/12 at 9:27pm
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Help overclocking 3570K