Well, seems as though this worklog isn't too awfully exciting for anyone. Probably since it's not a known case or something.
Anywho, I modded the case previously, I cut out the front LCD Panel and dremeled out the plexi so that it allows air to come in the front, and then cutout a spot for an 80mm fan so there is no restriction airflow wise.
I lost the pics of that mod when my old Storage drive got formatted..boo hiss.
Anywho, Here's most of the stuff I'll be using, H2O Cooling wise, along with a new tool. the handheld cordless screwdriver w00t.
And don't mind the little scoundrel hovering over my stuff...She's harmless...
And here's some other H2O stuff I have laying around...Yes, there's a Storm, MCW-60, and a D5 Pump...I have more too...TDX, 2 Maze 4's, and some other stuff...
I will be using the Swiftech Pump in this build, and the ThermalTake water Blocks. Along with 3/8" tubing, and I haven't decided..
Do I want to use the Single Rad and mount it one the back of the case, or do I want to shroud the Dual Heater Core?
I will also be picking up some SmartCoils and the AlphaCool Clear top and tank for the MCP-350 DDC Pump.