Overclock.net › Forums › Intel › Intel CPUs › i7 2600k wont OC...with Mfg tools need advise
New Posts  All Forums:Forum Nav:

i7 2600k wont OC...with Mfg tools need advise

post #1 of 2
Thread Starter 
Hello all,

I have a basic OC question. Without getting into all of the bios configuration possibilities to overclock, I just want to increase performance with the tools provided by the MB mfg. gigabyte.

The smart quick boost and easy tune 6 seem to be the same tool. I loaded both the GUI is just slightly different between them. Which one should be used?

Is there any conflict have both running?

Neither one is working even to get to level 1 much less turbo mode?

Spent a lot of $$ for these components and wont OC at all....not even little, any advise appreciated

i7-2600k
Mother board Gigabyte Ga--Z68X-UD3H-B3
32 GB RAM
1200W PS

Thx
Bw
post #2 of 2
Use easy tune 6 im guessing and increase cpu multiplier and cpu vcore accordingley. Be careful and watch your cpu vcore at full load, using anything other than manual cpu vcore can make your cpu voltage change drastically without you realizing.

How come you dont wanna use bios? Its so much safer.
Current rig
(11 items)
 
  
Reply
Current rig
(11 items)
 
  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › i7 2600k wont OC...with Mfg tools need advise